Question about 2009 Dodge Journey

Open Question

How to bleed power steering system on Dodge yourney 2.7 v6

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
RudolfDiesel
  • 100 Answers

SOURCE: 92 dodge p u cummins eng power steering pump

to bleed the system fill the fuel filter then crack the inlet fule line turn over untill you get fuel then tightnline and start

Posted on Jan 11, 2009

Ad
kidspeedy
  • 321 Answers

SOURCE: how do i bleed my power steering on a 2001 dodge ram 1500 4x4?

all you do to bleed the powersteering is turn truck off.
fill fluid to level full.
mustle the steering left to all the way back right.

this will purge all the air from the system.

thank you
jm

Posted on Jan 28, 2010

  • 3 Answers

SOURCE: How do ya proprly bleed brake/power steering on a

leave the cap off the top jack up front end and tern weels all the way to the right then to the left over and over till the flued isnt fomey..

Posted on Feb 24, 2010

  • 239 Answers

SOURCE: how do you bleed a power steering pump on a 2005

With the engine running slowly turn the steering wheel from stop to stop several times. Make sure the level stays full. As the air pockets are reduced the level may go down. It may take awhile to get all the air out of the system. If the power steering works it is not a problem.

Posted on Feb 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Put new power steering pump on 91' dodge Dakota , still have no power steering ! Why ?


did you bleed all the air out of system. could it be the rack system is the problem. it could be the valve system in the rack is not working.

Aug 22, 2015 | Dodge Cars & Trucks

1 Answer

How to bleed the power steering on 1989 Audi 500 2.2lts and what oil to use on power steering


Turning the wheels from lock to lock several time normally bleeds out the air. Most power steering systems use auto tranny oil dextron or atf 2 Check with auto specialist book shops for the manual or a dealer parts department

Feb 21, 2013 | Cars & Trucks

1 Answer

Bleed power steering on 2008 dodge avenger


to bleed power steering, with front wheels off ground slightly with front wheels pointing straight ahead.engine off. remove power steering filler cap.add power steering until fluid level stop dropping,wait couple minutes and wait, add fluid until level stay at full cold mark on power steering cap dip stick. dont over fill.when fluid level stop dropping, start vechicle,let it idle few minutes. see if fluid level drop if so add more fluid full cold mark.then turn steering all the way to left and right with out hitting a stop.turn steering wheel several times, then turn front wheels pointing forward check power steering fluid level.if power steering fluid level stop dropping air should be out of system, if steering turning wheel dont turn smoothly and power steering fluid look light tan color air getting in the system.check all power steering lines to rack and power steering pump for leaks.be sure you replaced all the power steering lines with new o rings if not you will get a leak.if you find a leak, you need to fix the leak and bleed system again.dont drive vechicle if your steering dont feel right,have vechicle towed to a garage.

Aug 25, 2012 | 2008 Dodge Avenger

3 Answers

Power steering pump replaced, start to work ok, after 10 milles driving, steering wheel is hard, like pump is not working, under hood everything look ok.


YOU HAVE AIR IN THE POWER STEERING SYSTEM.YOU NEED TO BLEED POWER STEERING PUMP FIRST BEFORE DRIVING VECHICLE.CHECK POWER STEERING FLUID LEVEL ADD MORE POWER STEERING UNTIL REACH FULL COLD MARK..RAISE VECHICLE FRONT WHEELS OFF THE GROUND.START ENGINE LET IT IDLE WHILE TURNING STEERING WHEEL LEFT TO RIGHT NON STOP DONT LOCK OR STOP STEERING WHEEL KEEP TURNING IT SEVERAL TIMES CHECK POWER STEERING FLUID IF LOW ADD UNTIL YOU GET COLD MARK ON DIP STICK DONT OVER FILL POWER STEERING PUMP BLOW A SEAL.IF POWER STEERING FLUID LOOK TAN COLOR SYSTEM FULL OF AIR.TURN OFF IGNITION LET CAR SET FOR A WHILE CHECK FLUID LEVEL.IF STEERING WHEEL FEEL STIFF HARD TURNING DONT DRIVE CAR UNTIL YOU HAVE NORMAL STEERING.IF STILL HAVE AIR IN SYSTEM BLEED SYSTEM UNTIL AIR IS OUT.

Feb 25, 2011 | 2002 Chevrolet Avalanche

1 Answer

How do i bleed my power steering, level i good but a little stiff, 2005 dodge dakota quad cab 4.7 liter 4x4


you don't bleed your power steering,just make sure it's full,if you have any air in the system it will work itself out,if your steering is stiff could be be a sign of a worn unit or the rack and pinion.









TIM...........

Oct 22, 2010 | 2005 Dodge Dakota

2 Answers

How do i bleed my power steering on a 2001 dodge ram 1500 4x4?


all you do to bleed the powersteering is turn truck off.
fill fluid to level full.
mustle the steering left to all the way back right.

this will purge all the air from the system.

thank you
jm

Jan 28, 2010 | 2001 Dodge Ram 2500 Truck

1 Answer

How long does it take to change a power steering pump and bleed the lines on a 1993 buick park avenue?


Book time (billable time) is

1.0hr - v6 normally aspirated
2.0hr - v6 supercharged

This should take no more than 2 1/2 hours for an inexperienced person. The lines will self bleed when the pump is installed and filled.

Jan 20, 2010 | 1993 Buick Park Avenue

2 Answers

How to replace power steering pump


2004 Pontiac Grand Prix V6-3.8L VIN 2

Power Steering Pump: Service and Repair
Power Steering Pump Replacement
NOTE: The content of this article / image reflects the changes called out by TSB: 05-02-32-004.

Power Steering Pump Replacement
Removal Procedure
1. Remove the accessory drive belt.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Disconnect the power steering pressure hose from the power steering pump.
5. Disconnect the power steering return hose from the power steering pump.
6. Disconnect the harness connector (4) from the power steering pump (1).
7. Remove the power steering mounting bolts from the power steering pump.
8. Remove the power steering pump from the engine.
9. Remove the power steering pump pulley from the power steering pump.
10. Remove the power steering pump reservoir from the power steering pump.
Installation Procedure
1. Install the power steering pump reservoir to the power steering pump.
2. Install the power steering pump pulley to the power steering pump.
3. Position the power steering pump to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the power steering pump mounting bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
5. Connect the power steering pressure hose to the power steering pump.
6. Connect the power steering return hose to the power steering pump.
7. Install the harness connector (1) to the power steering pump (4).
8. Install the accessory drive belt.
9. Fill the power steering system with fluid.
10. Bleed the power steering system.
11. Operate the power steering system and inspect for power steering system leaks.

d2ff628.jpg
949e18c.jpg
a9ee201.jpg

Sep 07, 2009 | 2004 Pontiac Grand Prix

1 Answer

92 dodge p u cummins eng power steering pump


to bleed the system fill the fuel filter then crack the inlet fule line turn over untill you get fuel then tightnline and start

Jan 11, 2009 | 1992 Dodge Ram 350

1 Answer

Bleeding power steering pump


The system bleeds its self as it runs, the pump will eventually stop wining once the air is out of the lines.Let the van idle and turn the steering wheel full lock in each direction a couple time to move the fluid through out the system letting out any air.

Nov 03, 2008 | 1998 Dodge Caravan

Not finding what you are looking for?
2009 Dodge Journey Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...