Question about Oldsmobile Cutlass Calais
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
follow all power source to the fuse panel over time road vibration
or even rust can this problem check to see if you have additional
fuses under your hush panel replace o one more thing checto see if your ignition module has good connection its by your cars fire wall.
Posted on Apr 06, 2009
it would take about 350 hours to kill your battery at 200 ma leakage .. between the computer, radio and anything else that has "keep alive" conditions .. i would think 200ma is maybe on the high side of normal .. to kill the battery in 2 days would require a continuous drain of more than 1.5 amps .. that would be about what the trunk light or under hood light would draw .. make sure those are going off .... alternator diodes can have leakage thats very high .. of course if you are measuring the leakage current right at the battery connector then all leakage sources should be included in the reading .. if its only 200ma then you might have a bad battery (low on water or sulfated) .. Pb acid batteries are easily ruined by leaving them discharged for a while .. and the maintainence free types can only handle a few deep discharges .. .
Posted on Jul 13, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
Tips for a great answer:
Mar 10, 2015 | 2003 Buick Century
Mar 04, 2015 | Buick Cars & Trucks
Mar 23, 2013 | 1998 GMC Sierra
Aug 20, 2012 | 2003 Buick Century
Sep 16, 2011 | Buick Century Cars & Trucks
Apr 14, 2010 | 1996 Buick Century
Jan 01, 2009 | 1996 Buick Century
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: