Question about 2001 Chevrolet Malibu

Open Question

Replace serpentine belt 2001 malibu

Do you remove motor mount

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: serpentine belt replacement on 2001 impala

I bought a new belt and it had a series of diagrams for different engines on the cardboard packaging (ie GM 3.8L). I needed it for my '01 Impala.

Posted on Sep 28, 2008

  • 4044 Answers

SOURCE: how do i replace serpentine belt on a 2000 chevy

You shouldn't need to remove the engine support. I recommend you get a Haynes repair manual for your vehicle from Auto Zone or the local Auto Parts store. If you do have to remove the support it should be a simple procedure.

Posted on Nov 17, 2009

  • 239 Answers

SOURCE: How do I change a serpentine belt on a 2001 Chevy

First - note the routing decal on the underside of the hood. If there is no decal, draw a diagram before removing the old one. Move the tensioner using a breaker bar (if there is a hole for it) or a wrench. Slide the old belt off the pulleys and put the new one on in the same position.

Posted on Jan 16, 2010

  • 1757 Answers

SOURCE: replacing serpentine belt on 2000 chevy van need belt diagram

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

I am assuming this "van" is a Chevy Venture?
CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/venture/2000_chevrolet_venture_drive_belt_routing_diagram.htm

Posted on Mar 06, 2010

  • 1056 Answers

SOURCE: How do you change the serpentine belt chevy malibu 200

Well you don't have to remove the tensioner. If you look at it, you'll see a 3/8 square hole in the arm of the tensioner. Put a ratchet wrench, or breaker bar in the hole, and you can move the tensioner, it is only spring loaded. The diagram for how the belt laces in should be on the radiator core support. Lace it for the majority around, move the tensioner, and once you have the belt in line, release the tension on the tensioner arm.

Posted on Mar 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My chevy maLIBU ALTERNATOR BELT SPINS THEN STOP CAR WON'T GO ANYWHERE


Vehicles: Chevy (GM) Malibu 2001-2005 3.1L SFI OHV 6-cylinder

Your battery has died since the alternator is not charging it. Jumping the car works to start the engine since the Malibu is using the energy of the second car to start and turn the engine.
Its possible that your belt may not be correctly routed or tensioned.

Check your 3.1L engine accessory drive belt routing. The arrow points in the direction in which the drive belt moves.



12_4_2011_9_15_39_pm.jpg

Fig. 1
Serpentine drive belt routing-GM 3.1L engine L/N bodies

Accessory Drive Belt Installation/Removal
GM 3.1L Engine

NOTE
Routine inspection of the belt may reveal cracks in the belt ribs. These cracks will not impair the belt performance. The belt should be replaced if the belt slip occurs if a section of the belt ribs are missing. A single serpentine drive belt is used to drive all engine accessories. All belt driven accessories are rigidly mounted with the belt tension maintained by a spring loaded tensioner. The indicator on the movable portion of the tensioner must be within the limits of the marks of the stationary portion of the tensioner. Any reading outside of these limits indicates either a defective belt or tensioner.

(1) Remove engine mount.
(2) Rotate the drive belt tensioner in a clockwise motion using a breaker bar or serpentine belt tool.
(3) Remove the drive belt.


12_4_2011_9_16_56_pm.jpg

Fig. 2.
Removal and installation of the drive belt - tool is shown installed on the tensioner. Arrow points to the power steering pump pulley.

To install:

(1) Rotate the drive belt tensioner in a clockwise motion using a breaker bar or serpentine belt tool.
(2) Install the drive belt. Connect the serpentine drive belt last to the power steering pulley.
(3) Install engine mount.

Dec 04, 2011 | 2001 Chevrolet Malibu

1 Answer

Do i have to remove the engine support in order to change the serpentine belt on a 2000 malibu 6 cly


Yes,, but its not that bad,, Just slide a jack with a small board on it to protect the oil pan..Apply a little pressure with the jack,,and remove the mount..You may have to raise a little on the jack or lower a little to make the mount a little easier to come out..Replace belt and install mount..Sometimes you can slide the belt through withou taking the mount all the way out

Sep 13, 2011 | 2004 Chevrolet Malibu

1 Answer

Do you need to remove the l/h side motor mount to replace serpentine belt on a 2001 park avenue?


No it is not necessary to remove the motor mount on either the standard 3.8L or the super charged engine. Just remove the tension on the tensioner and remove the belt or belts, both will come off without removing the motor mount.

Apr 11, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

I WILL LIKE TO KNOW HOW CAN I REPLACE THE POWER STEERING PUMP ON A 2001 CHEVY MALIBU


1. Remove serpentine belt

2. loosen power steering pressure and return hoses

3. Remove nut from pressure line mounting on alternator bracket

4. remove power steering pump mounting bolts.

5. Lift pump assembly from engine mounting and remove hoses.

6. Reverse order to install. Fill and bleed system.

NOTE: A new or rebuilt power steering pump will most likely not come with a pulley attached. You will need a power steering pulley remover/installer tool to transfer the pully from the old pump to the new one.

Feb 19, 2011 | Chevrolet Malibu Cars & Trucks

1 Answer

Motor mount in way when replacing belt


put a jack and a piece of wood under you engine then jack it up until you feel pressure that should allow you to safely remove the motor mount and replace your belt.

Jan 28, 2011 | 2001 Chevrolet Malibu

1 Answer

Is there any way to change the serpentine belt on a 97 oldsmobile achieva without removing the engine mount


no not if its the 3.1, to change the belt. remove from pulleys, put a suitable jack under left front of engine to support it. put a piece of wood on jack to prevent oil pan damage.a 2x4 works good . just put slight pressure on engine, then remove the motor mount. replace the belt and put the mount back on. let the jack down when done. thats it! I just replaced mine on a 2000 malibu 3.1, this last spring. have a good one !!

Dec 15, 2010 | 1997 Oldsmobile Achieva

1 Answer

Replacing serpentine accessory belt. Is it necessary to remove motor mounting brace to remove and install new serpentine belt?


From my understanding I think you have to remove the motor mount and mount the engine to remove it because I have been asking different mechanics about the serpintine belt on my 1998 Buick Lasabre.

Nov 28, 2010 | 1998 Buick LeSabre

1 Answer

Do you have to remove motor mount to replace serbtine belt on 2000 malibu


according to my online manual, it doesn't require that you remove motor mount to replace serpentine belt on 2000 Chevrolet Malibu.

Jul 03, 2010 | Cars & Trucks

2 Answers

When iput my car in gear i can fell the motor raise up with a thump noise also fan belt makes a winning sound


The Motor raising up issue is, you may have a worn or broken Engine or Transmission Mount, inspect the mounts by having someone or you, look at the mounts while someone else puts the car in gear. If you see the mounts move excessively, than the mounts need to be replaced. The whining or squealing Fan Belt may be a worn, glazed or loose belt. I would inspect the belt and tighten or replace as needed.

Jul 05, 2010 | 2001 Nissan Quest

2 Answers

Serpentine belt 2000 chevy malibu putting one on


first of all,put a jack under engine, put wood on top to prevent from hurting engine,jack up till a little tension is on jack to support engine.release tensioner, a 3/8 breaker bar will work in the square part of tensioner.next remove cruise control from braket and set aside.remove motor mount.if need be, jack engine up to remove belt. 3.1 v6

Oct 31, 2008 | 1998 BMW M3

Not finding what you are looking for?
2001 Chevrolet Malibu Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...