Question about 2001 Pontiac Aztek

Open Question

Crank sensor in block location aztek 2001 - 2001 Pontiac Aztek

Posted by Anonymous on

2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 577 Answers

SOURCE: i have a 2001 aztek

Hello Kay, What you need is to have a auto technician to check your auto for the reason it over heating. There are a number of reason why auto/truck over heat and most are not pleasant.
Such as, radiator fan not work, thermostat not opening or stuck closed, coolant level is really low,

temperature sensor is bad...maybe, leaky head gasket, plug radiator, OK, now, when you auto is overheating does it smell like burning anti-freeze, kinda sweet burnt smell.... If are smell this, then your auto is really over heating. Also, to you have a green looking fluid on your driveway where you park you car? If there is, then your auto is leaking anti-freeze.

Now, to find the sensor. Look on the engine, if you have 4 cylinder, or V6 look around the intake manifold the should be something that looks like the sensor you bought with rubber/plastic cap and one wire, and it will be only one wire. I wish you lots of luck in your endeavors in finding this temperature sensor, and hope it just this sensor that is malfunctioning. GB...stewbison

Posted on Sep 07, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2001 hyurdai xg300 how to replace crankshaft sensor

crank sensor is located on the front of the engine behind the
timing belt covers and is mounted to the front of the engine block. the alternator has to be moved to feed the harness down the front side of the block to replace the crank sensor it has a tone wheel that may have to be moved the remove and replace sensor

Mar 26, 2017 | 2001 Hyundai XG300

1 Answer

2001 aztek heater location?

This may sound like a very good answer but if you google "where is the heater location on a 2001 pontiac aztek" they will actually give you pictures and diagrams of the location in the engine showing exactly what you want and need to see.I have used this when locating my O2 sensor .Hope this helps!! Good Luck!!

Jul 13, 2014 | 2001 Pontiac Aztek

1 Answer

Aztek security light

Only light on when starting it is security, and it will not crank over??

The sensors for the security go bad in those, about $80 cost and an hour labor to replace.

May 22, 2014 | 2001 Pontiac Aztek

1 Answer

How to replace crank sensor on 2002 passat v6 2.8l

Hi. The crankshaft position sensor is located on the intake sector of the engine block, near the flywheel.This will be on the AAA engine build.

On the ABA build, The crankshaft position sensor is mounted on the side of the engine block, near the crank pulley.

Sep 17, 2012 | 2001 Volkswagen Passat

1 Answer

How do i replace crank sensor on 2000 olds alero 3.4 and where is it located

It depends on which crank sensor you are wanting to replace. There are two of them. The 24X sensor is located behind the front crankshaft pully and the crank pully must be removed to change it. The 7X sensor is located in the engine block on the right bank (firewall side) near the rear of the engine. This one simply pulls out of the block after disconnecting the electrical connector and removing the single bolt that holds it.

Dec 13, 2011 | 2001 Oldsmobile Alero

1 Answer

Where is the crank sensor located on a 2001 ford escort zx2 model?

The Crank Sensor is on the block, below the Exhaust manifold. You will need a T-20 Torx bit to take loose the bolt that holds it in. The wiring for it goes down the block on the front side and is off the same harness that the coolant sensors are on.

May 26, 2011 | 2001 Ford Escort ZX2

1 Answer

Where can i find the crank sensor in a VW 2001 V6 2.8L

Hi. The crankshaft position sensor is located on the intake sector of the engine block, near the flywheel.This will be on the AAA engine build.

On the ABA build, The crankshaft position sensor is mounted on the side of the engine block, near the crank pulley.

Apr 22, 2010 | 2001 Volkswagen Jetta TDI

1 Answer

2001 Aztek showing the awd is disabled. Why and


Mar 03, 2010 | 2001 Pontiac Aztek

1 Answer

Looking for the location of the crank position sensor and the knock sensor for a 2001 chevrolet silverado with a 4.8 8cylinder engine

Crank sensor; right (pass.) side of block above the starter. You may have to remove the starter to remove the crank sensor.

Knock sensor: There may be 2, a front and a rear. Both would be UNDER the intake manifold on top of the engine block one behind the other about 8 inches or so apart. The manifold and associated item may or may not need to be removed to access the sensors.

Aug 10, 2009 | 2001 Chevrolet Silverado

1 Answer

Crank sensor position location

Follow your plug wires to coil pack and module. Once you found the module, follow the wires from there to crank sensor on engine block.

Aug 06, 2009 | 2001 Nissan Sentra

Not finding what you are looking for?
2001 Pontiac Aztek Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides