Question about 2004 GMC Sierra 2500

1 Answer

Blades not moving

Passenger side wiper blade not moving. how do I fix it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 350 Answers

It's probably a loose nut where the blade attaches to the body!
You'll have to pry open the hinged cover with your hand or a screwdriver to expose the nut then just tighten it up.
I've had this problem.
Good Luck!

Posted on Jan 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger Windshield Wiper Not Working


If it were the motor neither side would move. Chances are its the linkage.
You'll probably need to remove the panel under the windshield to access the linkage and check it out.

Feb 06, 2014 | 2004 Chevrolet Cavalier

1 Answer

Wiper blades move real slow in the 1st & 2nd position


wiper blade on driver should be 22 inches and the passenger side wiper blade should be shorter make your wiper blades is what factory call for if too long they will move slow hang up.

May 23, 2013 | 2006 Opel Meriva 1.7

1 Answer

1999 Cadillac Deville wiper blade on driver side not moving


bent/broken wiper arms under the base of the windshield..remove the vent cover and service/replace broken parts.

Feb 09, 2013 | 1999 Cadillac DeVille

1 Answer

2000 BUICK REGAL MY WIPER BLADES (DRIVER SIDE) WENT OFF THE WINDSHIELD THE OTHER NIGHT. WHEN I PUT IT BACK IT DID NOT WORK PROPERTY WHAT COULD BE WRONG DO I NEED TO TAKE IT TO A DEALER?


i`m not sure what you mean by it not working properly i assume that you mean it goes back and forth like the passenger side, but it doesn`t clean the window and you put the blade on the arm correctly then the wiper may be damaged and you will have to replace the wiper blade.check and compare the installation of the driver`s side to the passenger side wiper and correct the installation of the blade

Mar 08, 2011 | 1999 Buick Century

1 Answer

I need to have 'step-by-step' instructions for replacing the driver side windshield wiper arm on my 2000 Ford Explorer. Can you help me with this?


  • Turn your wipers off, using the stalk on the left side of your steering column. Turn your ignition off and remove the key.

  • 2

    Pull the wiper blade up to lift it to the service position. Pull the front part of the blade down to position it at an angle.

  • 3

    Pull back the lock pin on the center part of the wiper blade (where it connects to the wiper arm). This unlocks the blade from the wiper arm.

  • 4

    Grasp the blade on each side and pull it down (away from the extended wiper arm) to release it from the "U" clip.

  • 5

    Repeat the process for the other wiper blade, if desired. Removing the driver's side and passenger's side wiper blade is the same.

  • 6

    Install the new wiper blade. Open the lock pin on the new blade, and then insert it into the wiper arm "U" clip. Close the lock pin and lower the wiper blade to its normal position.

  • Jan 29, 2011 | Ford Explorer Cars & Trucks

    1 Answer

    What size are my wiper blades on my 1998 olds cutlass supreme


    Hello tomkamy1: My name is Roger and I will answer your question. The passenger side takes a 19 inch wiper blade. The drivers side blade would be a 22 inch wiper blade. Should you need further help please just ask Please rate the answer. Thank You for using Fix Ya. Roger

    Dec 18, 2010 | 1998 Oldsmobile Cutlass

    1 Answer

    How to remove the wiper arm from the shaft so I can remove the cslotted cowl to replace the wiper bushings.


    REMOVAL & INSTALLATION
    (see Figures 1 and 2)

    To remove the arm from the pivot, lift the arm to permit the latch to be pulled out to the holding position and remove the arm from the pivot with a rocking motion.

    zjlimited_140.jpg

    Fig. 1: Mount the wiper blade/arm as shown-Dakota models

    zjlimited_141.jpg

    Fig. 2: Mount the wiper blade/arm as shown-1994-96 Pick-ups



    When installing the arms, the at-rest position of the blades should be determined before pushing the arm onto the pivot. For Dakota trucks, the tip of the driver's side blade should be 0.51-2.63 in. (13-67mm) above the cowl panel and the passenger's side blade should be 0.94-3.06 in. (24-78mm) above the cowl panel. For 1989-93 Pick-ups and Ramchargers, the driver's side blade should be 1.84 in. (47mm) above the windshield weatherstripping at the heel of the blade; the passenger's side blade should be 2.24 in. (57mm) above the weatherstripping. For 1994-96 Pick-ups, the wiper motor must be in the PARK position and the wiper blade should be about 0.85 in. (22mm) from the upper edge of the black-out areas at the base of the windshield.


    Hope this helps to solve it.

    Nov 26, 2010 | 1992 Dodge Ram 250

    3 Answers

    What size windshield wiper blade goes on the passenger side?


    Call your local parts store they can tell you, or take your old one off and take it to the store and match it up.

    Nov 27, 2009 | 2004 Chevrolet Cavalier

    1 Answer

    Driver side wiper blade doesn't sync with passenger side blade


    the wiper arm assembly is stripped for the knurled knob that is sits on.  replace the wiper arm with a new one.

    Mar 30, 2009 | 1995 Geo Prizm

    2 Answers

    2005 Chevy Equinox Wiper blade hits edge of window


    The 23 should work on the drivers side but you will need a 19" on the passenger side.
    Hope this helps and let me know.
    Regards,

    Feb 18, 2009 | 2005 Chevrolet Equinox

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    71 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GMC Experts

    yadayada
    yadayada

    Level 3 Expert

    70387 Answers

    Freddy

    Level 3 Expert

    1311 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Are you a GMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...