Question about 2007 GMC Sierra 1500
How to reset cruse control on 08 gmc
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it seems you have a short in either one of the lights or interlock. all are connected to the same fuse. trace the wiring from the fuse box back to the component. Using a test light test in between the wires. check for any obvious breaks in the wiring.
Posted on Dec 06, 2008
I had similar problem with my 97 sierra... I only lost 1 light, then brake lights stayed on all the time... turns out the "t" connector for the trailer harness under rear bumper was rotted inside...unplugged the 2 parts of the harness and pluged them into each other with out the "T" harness.... everything works great... Hope it helps ya
Posted on Feb 27, 2009
The multi purpose wand the includes the cruise control, wipers, high beams and turn signal, might have a short in it. Since the light comes on at first and immediately goes off makes me think the fuses are fine and it just a capacitor inside that wand. GM wants almost 500 for the part on my 01 Sierra, but you can easily find them online for around $90
Posted on Dec 18, 2009
Testimonial: "this was the best help ive gotten fron anyone thanks"
Defrost is the default position. Is the control a autyomatic temperture control unit? ( you set the temp and select automatic) if it is the system is completely electronic. You push the buttons and the control still says defrost or can you select something else and the control shows it but it just keeps coming out the defrost? If the control changes and the air comes out the defrost anyway and the cheack engine light isn't on, then the problem can be blown fuses or an air door actoater not working. Does the dash emit a clicking sound? if it does with the covers off the bottom of the dash reach around touching the different pieces till you touch the idem that is clicking. this is an acutor motor, or blend door motor. they have gears in them that wear out and break the motors aren't repairable and you just replace the ofending motor. the door that is moves can be stuck. and may have to be freed up with blaster, WD40, or other rust buster till it moves easy. maybe after getting the door to move smoothly you can get the old motor to move the door wiithout having to install a new one.
Posted on Jan 06, 2010
May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.
Posted on Feb 05, 2010
Tips for a great answer:
Mar 30, 2014 | Subaru Impreza Cars & Trucks
Sep 15, 2013 | 2008 GMC Sierra 1500
this case, to troubleshoot this problem, there are solved help links. Click the
link directly and refer the details to solve this problem yourself, with help
of diagrams: ------
and cruise control not working on Plymouth Grand Voyager?
Nov 28, 2012 | GMC Cars & Trucks
Sep 13, 2012 | 1992 GMC Sierra
Dec 26, 2010 | 2000 Honda Accord
Jul 24, 2010 | 2007 GMC Sierra C/K2500
Feb 21, 2010 | 1997 GMC Sierra K2500
Dec 18, 2009 | 2004 GMC Sierra 1500 Crew Cab
31 people viewed this question
Usually answered in minutes!