Question about 2005 Pontiac Montana SV6
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.
Posted on Jan 03, 2009
For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.
Posted on Feb 14, 2009
you probably have a garage door opener that changes the code after each opening. I had to push a button on the door motor and then run to the car and push the opener button within 15 seconds. Your car salespwrson is usually an expert at this.
Posted on Mar 21, 2009
SOURCE: I need to replace the
Where the upper radiator hose connects to the engine you will find the thermostat under that housing. You must drain the radiator and remove the upper hose. Then remove the 2 bolts holding the housing in place. Make sure to pay attention to which way the thermostat is mounted, spring up or spring down.
Posted on Aug 02, 2009
Tips for a great answer:
Dec 08, 2017 | Pontiac Cars & Trucks
Jun 17, 2016 | 2005 Pontiac Montana SV6
Nov 21, 2017 | 2006 Pontiac Montana
Mar 02, 2013 | 2006 Pontiac Montana SV6
Feb 01, 2013 | Pontiac Montana SV6 Cars & Trucks
May 18, 2012 | 2006 Pontiac Montana SV6
Dec 05, 2010 | 2005 Pontiac Montana SV6
Jun 15, 2009 | 2005 Pontiac Montana
Mar 21, 2009 | 2005 Pontiac Montana SV6
Feb 12, 2009 | 2006 Pontiac Montana SV6
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: