Question about 2002 GMC Envoy

Open Question

Door chime keeps buzzing with door closed 2002 envoy

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: 2002 GMC ENVOY GARAGE DOOR OPENER

You have a quick fix item. There is a send code button on your garage door opener. You simply have to press that button, and within 5 secs, press and hold the button on the garage door opener (your car or other) until the opener rapidly blinks. The garage door and the opener will share info,,, and presto,, you can open by the remote opener. Take a peek at your garage door opener instructions. You can have up to three settings at one time... one for each button. I was asked if the buttons ever got the openers mixed up,, and the answer is absolutely not.

Posted on Dec 01, 2008

  • 1 Answer

SOURCE: the door chime does not ring on a 2004 envoy

how do i disconnect my door chime from my 2001 GMC Sierra

Posted on Jan 22, 2010

  • 12104 Answers

SOURCE: can't get door open

wiring connections or lock latch frozen --to manually bypass latch or to unlock rear hatch -- in the bottom of door panel is a round access hole remove cover just clipped into place using a flashlight and a screw driver about 3 inches in on bottom is the lock latch and window lock latch connections if u pull back on the inner latch u will unlock the hatch which will allow u to open it[ when opened check the wiring connections for corrosion or damage if good ] now u can remove the whole hatch panel and check the latches and actuator the actuator and latches,and rod clips sometimes need to be lubed or sometimes the clips break or disconnect clips can be purchased at any auto store panel is clipped into place carefully pry from a corner and using a screw driver or panel tool pry straight back till panel clip pops replacement of panel put clips in place and push in panel

Posted on Feb 08, 2010

  • 2 Answers

SOURCE: 2002 gmc envoy - the pasanger door power windows,

Probably the door control module, which controls all those functions, as well as the power mirror. Some have reported getting it to work by disconnecting the battery for 30 seconds, so give that a try. If the module is bad it will have to be either re-programmed or replaced at a dealership, as it has to be coded to the vehicle's security code. I recently had mine replaced, cost was over $700 :-(


Posted on Feb 19, 2010

  • 1311 Answers

SOURCE: I have a 2004 G

You may have a defective radio or a bad radio harness connection. The door chimes go through the radio.

Posted on Feb 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Could someone help on our 1992 ford explorer when we turn on the head lights the ddinger keeps dinging and it won't go off tell you turn off the lights


The drivers door light switch/button is probably bad and stuck closed as if the door were open all the time letting the warning chime continue buzzing.

Jun 09, 2016 | Ford Cars & Trucks

1 Answer

2002 envoy drivers window,lock switch not working all others work put passenger switch in drivers still not working any one help.


Check for broken/cracked wiring in drivers door where wiring exits the door and enters the vehicle. Usually contained in rubber sleeve that may need to be opened for inspection. The wiring flexes constantly with the opening/closing of the door and can break

Mar 02, 2016 | 2002 GMC Envoy SLT

1 Answer

Is there a fuse for the door ajar on a 2002 kia sedona


No there is no fuse. If all the doors are closed check to see if the door ajar light is on your dash if it is you have a problem with 1 of the 4 door ajar sensors.

Mar 23, 2014 | 2002 Kia Spectra

1 Answer

Remote will not work have change battery


You may need to program it. Here is how you do that, if that is not a fix then you may need a new remote.
  1. Remove key from ignition.
  2. Close all doors.
  3. Open driver side door and leave open.
  4. Perform the following steps within 24 seconds.
    a. Insert key in ignition.
    b. Turn key to ON and OFF.
    c. Repeat step b two more times.
    d. Remove key.
    e. Push driver door frame button three times (black rubber button located on driver door frame that tell the vehicle whether or not door is closed.)

5. Buzz sound, chime or doors will lock and unlock should be heard at this point signaling that the vehicle is now in
programming mode. If not, wait 40 seconds and return to step 4.

6. All transmitters need to be programmed at this time, including the old ones. Push any button on the transmitter
two times. A buzz sound, chime or doors locking and unlocking should be heard at this point signaling that the
vehicle has accepted the new transmitter code. If there is only one transmitter, repeat this step two more times
using the only transmitter. If there are two transmitters, repeat this step two more times using the second
transmitter.

7. Push driver door frame button one time. Two buzz sounds, chimes or doors locking and unlocking 2 times should
be heard at this point signaling successful programming.

Sep 20, 2012 | 2003 Mazda MPV

1 Answer

Why does a chime ding intermittently, always twice?


Door open chime? Mayhem defective door switch

May 13, 2017 | 2007 GMC Envoy Denali

1 Answer

How do we disable the door ajar chime? My driver side KIA Spectra 2002 door won't fully close following a recent collision and between now and repairs, I'd like to disable the annoying chime or...


You have to pull the door panel off. Then there are a couple of plugs that go to the door latch mounted on the jam. One of the plugs is for the chime. Pull it, but you might have to put a jumper wire in the plug. I work on a lot of different cars and seen them work both ways. So I am not entirely sure how yours works. Unplug it and if it goes off your done. if it doesn't, use a jumper wire in the plug.

Aug 22, 2011 | 2002 Kia Spectra

2 Answers

TRYING TO FIX A DOOR CHIME ON A 2002 PONTIAC SUNFIRE. NEED TO LOCATE WHERE DOOR CHIME IS LOCATED ON THIS VEHICLE


In most vehicles the "chime" is located in the dash around where your 4 way flaser is. It could simply be the door switch also which is a little button that depresses when you close the door to open the circuit shutting the dome light and chime off. They are easy to change and inexpensive. Hope that helps.

Aug 05, 2011 | 2002 Pontiac Sunfire

1 Answer

The remomte control is not working after the high temperatures of yesterday With the key we can open de the doors but despite of the new batery in the remote it is nog functioning


Ok here are the programming instructions for the remote, follow them exactly, no missed steps, if this doesn't correct the issue the remote is defective most likely.

  1. Remove key from ignition.
  2. Close all doors.
  3. Open driver side door and leave open.
  4. Perform the following steps within 24 seconds.
    a. Insert key in ignition.
    b. Turn key to ON and OFF.
    c. Repeat step b two more times.
    d. Remove key.
    e. Push driver door frame button three times (black rubber button located on driver door frame that tell the vehicle whether or not door is closed.)

5. Buzz sound, chime or doors will lock and unlock should be heard at this point signaling that the vehicle is now in
programming mode. If not, wait 40 seconds and return to step 4.


6. All transmitters need to be programmed at this time, including the old ones. Push any button on the transmitter
two times. A buzz sound, chime or doors locking and unlocking should be heard at this point signaling that the
vehicle has accepted the new transmitter code. If there is only one transmitter, repeat this step two more times
using the only transmitter. If there are two transmitters, repeat this step two more times using the second
transmitter.

7. Push driver door frame button one time. Two buzz sounds, chimes or doors locking and unlocking 2 times should
be heard at this point signaling successful programming.

Aug 07, 2009 | 2003 Mazda MPV

Not finding what you are looking for?
2002 GMC Envoy Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...