Question about 2004 Jeep Grand Cherokee

1 Answer

How to change brake lights on a 2004 jeep grand cherokee

Removed the two screws on light housing and brake light lens just loosens ,but is still atached. can'nt get at light to change it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 133 Answers

Will just have to pull it staight out. has two balls that clip into plugs in the body to. if it will not come out will have to wedge some sort of plastic wedge between the body and lens

Posted on Jan 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't know how to change the head light on my 1997 Jeep grand Cherokee. there doesn't seem to be any screws to loosen the light.


Hi Clint,

I just want you to know that you are not crazy or blind!

The reason you cannot find any screws is because you are dealing with a snap-together vehicle.
If you only want to replace the bulb, you can reach around the radiator support and twist the bulb retainer to remove it and the bulb. If you are wanting to replace the ENTIRE headlamp assembly, follow the instructions below.

REMOVAL

Grasp lower edge of headlamp lens and pull straight back (away) from Grille Opening Reinforcement (GOR) . Disengage lower adjuster pivots from lens assembly.
Grasp upper edge of headlamp lens. Pull straight back (away) from grille opening reinforcement (GOR). Disengage upper adjuster pivot from lens assembly.
Rotate bulb lock ring counter clockwise. and remove ring and bulb from lens.
INSTALLATION

Replace by seating the assembly in the lamp housing and turning the lock ring 1/8 turn clockwise to secure.
Align upper adjust pivot into headlamp opening and snap into place.
Snap lower adjuster pivots into place.

Oct 16, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Replacement of rear license plate light bulb


My 2004 Grand Cherokee has 1 phillips head screw that you remove, place your thumb on the left side of plastic housing to pop it loose,( The whole housing comes out) then twist the pigtail to remove from the plastic housing, then pull out the bulb. Reverse the process to reinstall.

Mar 06, 2011 | 2004 Jeep Grand Cherokee

1 Answer

How do I replace the passenger side corner light and front side turn signal light?


Front Turn Signal & Parking Lights


7ccc73e.gif
Remove the 2 parking light housing retaining screws ...


9898a80.gif
... then pull the housing away from the vehicle far enough to remove the bulb socket from behind the housing. Turn the socket counterclockwise and pull


a323ae9.gif
Push the bulb in the socket gently and turn clockwise, then pull the bulb out of the socket. Note the offset retaining ears on each side of the bulb


  1. Remove the screws from the lens and separate the lens from the headlight bezel.
  2. Remove the headlight bezel.
  3. Remove the screws from the turn signal housing and pull it out.
  4. Turn the bulb socket counterclockwise 1/3 turn and remove it.
  5. Installation is the reverse of removal.


Side Marker Lights
  1. Remove the screws from the marker lens and separate the lens from the headlight bezel.
  2. Pull the bulb from its socket in the back of the lens.
  3. Installation is the reverse of removal.

Feb 14, 2010 | 1997 Jeep Grand Cherokee

2 Answers

My 2004 jeep grand cherokee's drivers side brake light goes out when i press the brakes with the head lights on but it. it works normal when the head lights are not on. any suggestions


I would suggest that you take a look here (I used this to correct brake-light issues on my '01):

http://www.topix.com/forum/autos/jeep-grand-cherokee/T63DRCOTUFKMHQ207

Many Grand Cherokees have had this type of issue. The thread is lengthy, but does cover just about every type of issue known with the tail/brake lights.

Dec 07, 2009 | 2004 Jeep Grand Cherokee

2 Answers

How do i get to the front turn signal bulb 1997 Jeep grand cherokee?


Front Turn Signal & Parking Lights

6bad7be.gif
Remove the 2 parking light housing retaining screws ...

36b7e3d.gif
... then pull the housing away from the vehicle far enough to remove the bulb socket from behind the housing. Turn the socket counterclockwise and pull

5206de4.gif
Push the bulb in the socket gently and turn clockwise, then pull the bulb out of the socket. Note the offset retaining ears on each side of the bulb

  1. Remove the screws from the lens and separate the lens from the headlight bezel.
  2. Remove the headlight bezel.
  3. Remove the screws from the turn signal housing and pull it out.
  4. Turn the bulb socket counterclockwise 1/3 turn and remove it.
  5. Installation is the reverse of removal.

Oct 12, 2009 | 2002 Jeep Grand Cherokee

3 Answers

2003 jeep grand cherokee brake lights replacement


Remove screws for lens. You may have to access them from inside the hatch. Then pull out lens, then turn and pull out bulb and socket, Push and turn then pull bulb out.

Sep 12, 2009 | 2003 Jeep Grand Cherokee

1 Answer

How do I change the buld on my fog light?


Jeep WJ 1999-2003 - Front Foglamp (#9055)

1379890.jpg

The foglamp bulbs can be accessed and removed from underneath the bumper without tools, although it is a tight fit. Turn the lamp socket 1/4 turn counter-clockwise to remove from the rear of the housing. Note that the screw in the front of the foglamps is for alignment only and does not remove the outer lens. The fog lamp housing is attached to the fascia with two nuts which can be removed with a 10mm socket.

Fog lamps can be added to most Laredo model WJ's that came from the factory without them. Mopar kits are available that include two fog lights, wiring harness, and steering column switch. Click HERE for part numbers and other information on these kits.


Jeep WJ 2004 - Front Foglamp (#9145)


fc74409.jpg


Good luck (rated this help).

Sep 10, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Replace rear brake light on 2004 jeep grand cherokee passenger side


Open up the hatch and look for the screws that hold the tail light assembly to the body. After removing them you can gently pull the whole tail light from the truck. You will seee the sockets that the bulbs are in and they twist like a bottle cap to get to the bulb. Just pull the bulb from the socket and reverse what you did to put it back together.

Aug 09, 2009 | 2004 Jeep Grand Cherokee

2 Answers

2002 jeep grand cherokee. Rear left brake light isnt working


The problem with your tail light is the housing is broken where the socket goes in. If you pull that socket out and look you will see the metal tap will be pushed down and the plastic around that will be broke. Easy fix is to replace the lens but you can get under the metal tap with a small flat tip screw driver and pull up on it very lightly and it should work for awhile.

Hope this helps
Cory

Nov 24, 2008 | 2002 Jeep Grand Cherokee

1 Answer

My rear lights on my 99 jeep grand cherokee do not work when I turn the lights on. They work fine when the lights are off. Any idea as to what the cause might be. Any place I can view a wiring diagram...


These Jeeps are notorious for the retainers breaking that hold the circuit board type wiring against the bulb contacts. With my 2000 Grand Cherokee, the brake lights would work when the headlight/tail lights were off. If the lights were on, the rear lights would go out altogether when I pressed the brakes. The easist fix would be replacing the tail light assemblies, but these are not cheap. My fix was to open up the inside cover of the tail light housing and use machine screws in each of the locations that the plastic tabs hold the retainer against the light housing.

Jul 27, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...