Question about 2007 Chevrolet Impala LS Sedan New Cars
Ignition key will not unlock door, can't open car hood.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: key fob remote start issues
You need to get one that works on the same wide range frequency as the reciever in the car, and then it's a simple matter of opening both the new and old fobs, and matching the fine frequency settings by putting the little switches inside where they should be according to the old fob's switches. If there are no switches in the old fob, it's preset and there's not much you can do about it.
Posted on Mar 09, 2009
where are your ignition key.most of the time the ignition key opens the car if the remote stop working ..if your keys lock inside. vechicle .you got to call a lock smith.or go to dealership give them your car serial number.
Posted on May 16, 2009
SOURCE: 1991 Chevy Lumina. Car
The key should work even if there is no battery in vehicle. Have you tried both doors (or all doors with locks) Do you live where the temp is below freezing - could be frozen shut or locks frozen?
Posted on Dec 01, 2010
SOURCE: 2005 cobalt ls, 24000 mi,
Most commonly if this is a bad receiver, when receiver start going bad they will work and not worked intermittently. The most you can do at this point is try to reprogram the system and see if it begins to work properly again otherwise it's gonna be time to replace the receiver. Part of the receiver is working, see the receiver receives your signal
but then it must perform an action and it's the action part of the
receiver that has the problem.
If the reprogramming must be done at the dealer with a factory scanner, unfortunately the other scanners available will not do this.
Keep in mind that the best place to possibly get a replacement key fob would be from the dealership. They will be able to sell you the fob and program it to your vehicle for you as well. Also if you need any extra keys you can get them there as well.
Hope this helps. Keep us updated.
Posted on May 04, 2011
It may be as simple as reprogramming your system. There is a way to re-synch your keys to the system. Use the instructions at:
That vehicle had a lot of problems with the PCM "Power Control Module" and that may be your problem.
Posted on Jun 11, 2011
Tips for a great answer:
Dec 16, 2013 | 2001 Chrysler Sebring
Oct 31, 2012 | Cars & Trucks
Jul 07, 2012 | Pontiac Vibe Cars & Trucks
May 13, 2012 | 2009 Toyota Venza
Sep 20, 2011 | 2006 Toyota RAV4
Aug 17, 2011 | 2003 Chevrolet Monte Carlo
May 23, 2011 | 2005 Nissan Murano
Jun 10, 2010 | 1999 Porsche 911 Carrera
57 people viewed this question
Usually answered in minutes!