Question about 2003 Ford Escape

Open Question

Pcv valve location for 2003 ford escape 3.0 litre engine

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: pcv valve

I have a 98 4L SOHC . The valve seems to be behind the intake manifold. The emissions diagram shows 2 hoses going to it. Local dealership swears Part #EV225 is correct. You would not believe how much of the internet is devoted to this situation

Posted on Sep 23, 2008

  • 3 Answers

SOURCE: PCV valve location

if i know what you are asking, look at where you put your oil in. on the valve cover to the top right should be a plug with a tubeing runs to your air clear tube where the air mass sensor and carb is located. i think that is what you are looking for.

Posted on Nov 07, 2008

davesmith_37
  • 94 Answers

SOURCE: where is the pcv valve located on a 2003 ford ranger

  • The PCV valve can be located in several places. The most common location is in a rubber grommet in the valve cover. It can be installed in the middle of the hose connections, as well as installed directly in the intake manifold.
  • Once the PCV valve is located, make sure all the PCV system hoses are properly connected and that they have no breaks or cracks.
  • Remove the air cleaner and inspect the air and crankcase filters. Crankcase blowby can clog these with oil. Clean or replace such filters.
  • Oil in the air cleaner assembly indicates that the PCV valve or hoses are plugged.
  • Make sure you check these and replace the valve and clean the hoses and air cleaner assembly.
  • When the PCV valve and hose are in satisfactory condition and there is oil in the air cleaner assembly, perform a cylinder compression test to check for worn cylinders and piston rings.
  • Posted on Feb 27, 2009

    greezy_je208
    • 237 Answers

    SOURCE: Where is the pcv valve located on a 2003 Ford

    it is located on the valve cover on the drivers side.

    Posted on Dec 17, 2009

    mitchbtu
    • 121 Answers

    SOURCE: Where is pcv valve located on 2005 taurus

    It is below the egr valve close to the intake manifold below the intake air sensor, there is a tube running to it from the engine to recirculate exhaust air with fresh air, there is a clamp holding it to the air intake that you need pliers to remove, then you need to turn counter-clockwise 90 degrees to remove, do the reverse to install. to make it easier to access remove the upper intake. The pcv valve is not visible, however, you can identify it by the 3" inch long rubber hose that connects to the steel line running into the bottom of the intake. I have the part and am going to replace it soon, although Ford really makes it difficult to remove it -
    pcv valve is located just under the throttle body. remove air cleaner assembly from throttle body and you will see a u shaped hose running horizontally.

    Posted on Jan 27, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    2009 ford escape pcv valve location


    On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple. That hose makes a 90 degree bend and goes around to the rear of the motor. Where that hose meets the Y-connector from the other side of the intake you'll find the PCV valve. It's almost impossible to see it with the hood installed, and even tougher to reach it.

    Dec 14, 2015 | 2009 Ford Escape

    1 Answer

    Pcv location ford escape 2010 2.5 gas engine


    The PCV valve is located under the intake manifold on the non-hybrid 2.5L engine. The intake manifold MUST be removed in order to service the PCV valve.
    The PCV valve sits in the crankcase vent oil separator.

    May 16, 2014 | 2004 Ford Taurus

    1 Answer

    Location of the pcv valve on a1993 ford mustang LX 2.3 litre engine


    Both of you are wrong...it is a hose connected to the engine block under the intake manifold at the front of the motor and snakes back to come out under the intake manifold and the PCV valve plugs in there.

    Apr 07, 2012 | Cars & Trucks

    1 Answer

    I cant find the location of the pcv valve on my 98 ford contour 2.5 litre


    it is located under the hood in the middle upper engine area,on the top, mounted in the valve cover.

    Apr 20, 2011 | Ford Contour Cars & Trucks

    1 Answer

    Were is locate the pvc valve in my 2003 ford escape 3.0l xlt, the engine light is on. Tanks


    Valve Cover

    PCV won't set a check light,unless you have
    a vacuum leak near it & it won't be the PCV

    Apr 05, 2011 | 2005 Ford Escape

    2 Answers

    Location of pcv valve on 03 ford focus


    http://www.focushacks.com/images/pcv.jpg
    Here's a picture to locate it..
    So, when looking at the engine from above, on the right of the exhaust.

    Procedure to replace it
    1) Lift and support the front end of your car, or drive up on ramps
    2) Get under the front of your car. The PCV Valve is located behind the exhaust manifold, a few inches below the valve cover.
    3) Push up on the PCV valve to pop it out of the tube, or pull. You can get it out of the rubber tube with some effort.
    4) Remove the rubber elbow from the top of the PCV valve. This can be re-used if it's not squishy. It can also be replaced cheaply.
    5) Put the elbow on the new PCV Valve
    6) Re-attach the elbow to the PCV tube
    7) Push the new PCV valve back down into the large rubber tube

    Sep 25, 2009 | 2003 Ford Focus

    3 Answers

    Where can I find the pcv valve location


    please rate as fixed if this helps.

    4 cylinder

    SECTION 303-08: Engine Emission Control 2003 Escape Workshop Manual
    REMOVAL AND INSTALLATION Positive Crankcase Ventilation (PCV) Valve —2.0L Zetec Removal and Installation
    1. Remove the PCV valve.
      • Remove the crankcase ventilation hose from the PCV valve.
      • Remove the PCV valve from the grommet by turning the valve counter-clockwise
    f21fec7.gif
    ------------------------------

    Apr 12, 2009 | 2005 Ford Escape

    1 Answer

    Ford Ranger PCV valve.


    should be on the valve cover... goes into the cover thru a rubber gromet with a vacuum hose attached.

    Robert

    Jan 26, 2009 | 2003 Ford Ranger Regular Cab

    1 Answer

    Where is the PCV Valve Located ???


    okay i'm not 100% sure but it should be on top of the vavle cover or near the intake

    Jan 19, 2009 | 2003 Ford Ranger Regular Cab

    2 Answers

    PCV valve location


    if i know what you are asking, look at where you put your oil in. on the valve cover to the top right should be a plug with a tubeing runs to your air clear tube where the air mass sensor and carb is located. i think that is what you are looking for.

    Sep 05, 2008 | 2002 Ford Taurus

    Not finding what you are looking for?
    2003 Ford Escape Logo

    Related Topics:

    95 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75066 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    fordexpert

    Level 3 Expert

    5470 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...