Question about 1998 Chevrolet S-10 Pickup

Open Question

Replacement bolt crankshaft sensor s10 truck

Need to know size and lenght

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 356 Answers

SOURCE: 97 s10 blazer cuts out and loses power while driving.

Had the same problem with by 1998 S10 a couple years ago. Changed fuel filter?? didn't work. Changed the fuel pump?? didn't work. Changed the fuel pressure regulator?? didn't work.

I was about to the end of my rope when I put a timing light on it and it showed firing on cylinders more then once a cycle. Turns out my distributor cap was bad and spark was jumping between contacts. When a spark is spread out over more then one cylinder, it doesn't fire correctly and that is causing it to bog out. Simple and a lot cheaper then all the other fixes I tried. Crank sensor was my next option though.

Posted on Feb 01, 2009

cooper0365
  • 347 Answers

SOURCE: i need to know what size wrench to use to tighten

most are 13 or 14 mm

Posted on Oct 08, 2009

  • 7353 Answers

SOURCE: I am replacing a starter on a 96 s10 4wd and I

Right side. For any car, just follow the large positive battery cable, it always ends at the starter.

Posted on Dec 19, 2009

  • 4 Answers

SOURCE: 1998 Chevrolet S10 Truck

i had the same problem i tried the fuel filter,the fuel pump,the crank shaft sensor,the the brain,and replaced the whole steering coloum just incase it was problem in the wiring.but mine ended up being the ignition module.the only reason i found out then is because i took it to a mechanic.i ended up spending over 600 dollars to finally get it fixed,i hope you dont do the same,hope this helps.

Posted on Mar 14, 2010

csmock132
  • 4669 Answers

SOURCE: need to know bolt size transmission 1991 s10

The heads are actually 9/16, the bell housing bolts are standard, not metric. All the other bolts are metric.

Posted on May 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 chevy S10 4x4 4.3 engine a/c compressor bolts


Hey Waynelee.. I would go to the local Chevy/GMC dealer and get the factory bolts..( and they usually offer some good advice when you tell them what you are trying to accomplish)...

Jun 16, 2017 | Cars & Trucks

1 Answer

Bolt size for starter 92 tracker


mount starter mount
lost both?
they are both the same diameter.
the length is super easy, measure it.
the leaves, diameter, metric, 8 or 10mm and pitch
so using a box of random bolts with starter off
find one that fits, m8 or m10, or m12.
now you know the sizes, and with starter off the holes are right there. in front of you to test.
to get length, use drinking straw, and your thumb, nail
to find lenght fitted up by and then move straw to ruler, metric
ahhhhhh there is the lenght in 5min work.

if no bolts in the scrap box, at all, metric, buy some.

Oct 30, 2016 | 1992 Geo Tracker

1 Answer

How does the metal plate on crank attach to the crankshaft sensor?


They are called a reluctor wheel and some are heated and pressed on, others are bolted on or held in place with dowel pins and then some fit on keyways. They attach to the crankshaft and rotate were as the sensor is attached to the housing and is stationary.

Jun 25, 2015 | Cars & Trucks

1 Answer

I need to know the size of the bolt that hold the crankshaft pulley on.On a 1997 saturn sl 1 sohv


Only buy this from a dealer. It's the one piece I wouldn't buy anywhere else.

Jul 03, 2014 | Saturn SL Cars & Trucks

1 Answer

Need to determine 2001 Daewoo Lanos crankshaft pulley bolt size


Measure the bolt head & divide by .0395 to convert to metric size

Feb 23, 2013 | Cars & Trucks

1 Answer

Need to know bolt size transmission 1991 s10


The heads are actually 9/16, the bell housing bolts are standard, not metric. All the other bolts are metric.

May 04, 2010 | 1991 Chevrolet S-10 Blazer

1 Answer

I need starter bolts for 1996 caravan.sizes lenghts.where do i find this info. thanks


Contact your local dodge dealer parts department they have all the info.Make sure you give them the correct engine size and only use starter bolts regular bolts will snap off

Aug 22, 2009 | 1996 Dodge Caravan

1 Answer

Where is the crankshaft position sensor located on a 2006 chevrol


on 2.2 models remove starter. disconnect 7x crankshaft position sensor wiring harness.remove sensor mounting bolt, with draw sensor, replace o ring and lightly lubricate it with oil.... on 6 cylinder models,..remove the drive belt, jack up car, remove crankshaft pulley. remove sensor bolt and pull out.( noting the wiring harness for installation).

Dec 24, 2008 | 2006 Chevrolet Malibu

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...