Question about Toyota Camry
Windshield washer fluid low indicator light will not go out
A 2012 should be under warranty . These cars have to be scanned when lights come on usually because of their computers. It could be as simple as a reset, but I would take it to the dealer, or try running the fluid low purposely, and filling it up again as they may have a float inside the washer resevior sticking, Toyota is good to fix their customers up, if all else fails, I would bring it in. Hope this was helpful
Posted on Jan 02, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi first of all can you hear the motor working if not check the motor if you can you have a blockage either a traped pipe if you have been filling with washing liqiud or simular the jets can get blocked or a pipe has a break or come off yates210456
Posted on Oct 09, 2008
I have a 2003 Jetta and the fuse box is between the dashboard and the drivers side door. There is a lid that covers it on the dashboard side. Inside there is a diagram/fuse card. The card has one top rectangular series of fuses numbered 8 through 23. Below is a square series numbered 24 through 44. The washer fuse is number 24 on the top left of the bottom square series. For me, I checked the fuse and it was good, therefore I am assuming that my pump is dead.
Posted on Jun 17, 2009
If you have used ANYTHING beside windshield solvent in you reservor, you may have created WAXING from soap in the bottom of washer tank, which clogs pump,lines, and nozzel....take the tank out and wash it..disconnect washer hoses at nozzel and clear with compressed air along with the nozzel...if you use solvent only you may have a worn washer pump or restriction...check those and good luck.....
Posted on Jul 04, 2009
the only solution acording to the manual is to replace the reservoir... not much to say about that, u do have the option to patch it...be careful with the product u use to glue that patch.
Posted on Aug 21, 2009
Tips for a great answer:
Jun 27, 2016 | Chrysler 300 Cars & Trucks
on Oct 08, 2010 | Buick LaCrosse Cars & Trucks
Jan 01, 2016 | Ford Freestar Cars & Trucks
Dec 26, 2015 | Cars & Trucks
Nov 28, 2015 | Cars & Trucks
Jan 25, 2011 | 2003 Honda Odyssey
Jan 02, 2011 | 2007 Dodge Ram 1500 Quad Cab Sport
Oct 21, 2010 | Cadillac Catera Cars & Trucks
Nov 17, 2017 | Toyota Cars & Trucks
876 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: