Question about 2004 Toyota Sienna

1 Answer

Running light on my 2004 toyota sienna

The light on the back hatch is out? I got a bulb but how do you get the cover off there is no screws.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 59 Answers

You have to take off the back hatch pull down strap. It is held in place with a large screw likely concealed under a decorative cap. Then the whole rear cover on the inside of the hatch can be removed. I have a PDF on this somewhere I could dig up. Contact me if you want it emailed to you. As they say a picture is worth a thousand words and there is drawings in the PDF.

Posted on Feb 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 sienna tail light need replacing. How do I gain access to replace lightbulb. There is a nut on the hatch, do I reomove the nut and the light assembly come out? Help if you can, thanks,


If the 2003 is like my 2002 Sienna and you are trying to replace the light within the hatch, then you have to access this light assembly through the rear interior panel. You can not remove the lens or the light assembly from the exterior of the vehicle. This really did take about 10 minutes.
Step 1 - remove the 2 screws from the hatch back handle by flipping the covers down to access the screws. Insert a screw driver about 1/16 of an inch into the top of each end of the handle to flip the covers down. This will expose the screws.
Step 2 - Use a socket drive wrench to remove the 10 mm screw from each end of the handle.
Step 3 - Use a screw driver to slide the cover up and off of the retaining clip on the left (drivers) side of the rear panel and remove the 10 mm screw from the clip.
Step 4 - Now the only thing holding the back interior panel on is about nine plastic clips. Carefully pull the panel away from the door starting at the bottom where the handle was removed. Work your way across the bottom and up the left side popping each of the snaps loose. Move back to the right and in my case the panel fell off in my hands. I was able to remove and replace the light with ease at this point.

Apr 30, 2011 | 2003 Toyota Sienna

2 Answers

Replace license plate lights


Hi there,

Firstly, remove the four screws on the bottom of the license plate light assembly using a Phillips screwdriver. Then pull the license plate light cover out away from the rear of the car. Pull the bulb forward and pull it straight out of the wiring socket.

A press the new bulb into place until it is secure. Push the bulb and wiring assembly back up inside the light assembly and replace the license plate light cover. Replace the four screws that secure the light cover and tighten them with a Phillips screwdriver. Finally, turn on the lights to test the new bulb.

Hope this helps...

Jan 17, 2011 | 2007 Toyota Sienna

1 Answer

Toyota Sienna 2004 Headlight Problem


If you have the HID bulbs, and there is moisture in the bottom of the assembly, the high voltage box at the bottom will not work. this requires removing the whole headlamp, removing the circuit board from the bottom and drying out. I have done mine twice before finally finding how water was getting in at the top seam of the lamp assembly. You will have to dis-assemble part of the wheel well and bumper cover to gain access to all the mounting bolts. Best of luck

May 02, 2010 | 2004 Toyota Sienna

1 Answer

2004 Prius driver side rear taillight works intermittently


replace the bulb, you can access the bulb when you open the hatch. there is a cover at the back of the tail lights. or go to your local autozone or pepboys. they will replace it for you with no extra charge

Feb 21, 2010 | 2004 Toyota Prius

1 Answer

How do I replace the dome light bulb in my sienna van? the housing does not pop out..


It's easy - the plastic covers will pop off if you gently use a screw driver to pry the three points of contact on each cover. There are 2 posts in the middle going into the outside edge, and one clip at the end. The covers come off and you can easily replace the bulbs - forget about opening the garage door oopener and removing the screws - that won't work (I tried!).

Dec 05, 2009 | 2002 Toyota Sienna

Not finding what you are looking for?
2004 Toyota Sienna Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...