What will be the torque specs to instal the camshaft on kia sedona 2002
You should begin tightening from the middle and work your way out on each camshaft:
Tighten the bearing cap in two or three steps. Tighten it to the standard torque at the last stage.
*Bearing cap standard torque
Torque
16 pieces at the both ends : 18.6 - 20.6 N·m
(190 - 210kg·cm, 13.7 - 15.2 lb·ft)
24 pieces in the middle : 10 - 12 N·m
(100 -120kg·cm, 7.38 - 8.85 lb·ft)
To much too type, there is a lot of details to this job, the best thing to do is to get a book on this particular vehicle, its about $20.00 at a auto parts store. This will give you all the step by step, the do's and don't-- locations and torque specs. ect....
543 views
Usually answered in minutes!
×