Question about 1997 Suzuki Baleno

Open Question

Lifter noise ovhc 1.6 susuki baleno - 1997 Suzuki Baleno

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 193 Answers

SOURCE: transmision level fluid Baleno esteem 2002 susuki

The proper fluid level is marked on the dip stick. With the engine running and in park, raise the hood and remove the dip stick from the autotrans filler tube. With a clean rag, wipe down the stick and then place the dip stick all the way back in the tube again, and then pull it out once more.
Holding the stick level, you can now read what the fluid level is.

If you add any fluid, do so in small amounts, such as a half a pint at a time.

Do not add fluid with engine running.

Thank you for adding your comment
Bill, ASE Master Technician

Posted on Nov 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My engine has intermittent lifter rattling what could be the problem


Chevy Vortec lifter & valve tap how to repair it - YouTube

? 10:08
https://www.youtube.com/watch?v=KPAMIeeY-q8
May 22, 2012 - Uploaded by AdirondackNY
this video has info on how to fix a severe valve tap or sticky lifterusing 1 quart of ... Chevy 5.3 liter lifter noise and motor flush solution How to ...

4.3 engine knock lifter or bearing? - YouTube

? 1:22
https://www.youtube.com/watch?v=oSbyAbS6e2c
May 27, 2010 - Uploaded by jerjer0241
any idea weather its a rod bearing or a lifter or even summin else? the service engine light is on because i have the air intake off. Just did an oil change ... ... Up next. Engine Knocking or Ticking?!? This Could Be Your "FIX" ...

Ticking Noise From Valve Lash Adjusters Due to Infrequent ...

repairpal.com > Problems > Mazda > Mazda6


Jan 19, 2016 | Cars & Trucks

1 Answer

Low press. and lifter noise, changed oil pump and lifters still low press. and lifter noise


1. What year and brand/model is the vehicle and which engine is fitted.\
2. What were the symptoms before you began work on the engine.
3. What specification and grade of oil are you using in the engine?

Oct 30, 2015 | Cars & Trucks

1 Answer

My 2ltr V6 Vitara has a rattle. Top End noise, it rattles like noisy tappets on start up and gets less as the engine warms up (around five minutes) then it almost stops. So far I have pulled the rocker...


this is not SOLIDS engine, there is no LASH setting, !
the engine has a chain, and a set of hydraulic bucket valve lifters.
the chain can be bad or any lifter, can be dirty and collalpesd.
when the engine is dead and no oil pressure the lifters are normally collapsed, when you start the engine. oil pressure does 2 things
all lifters pump up, and clearance goes to zero. (no noise)
then the cam tensionor, pumps up (they fail) and chain noise ends.
some noise is ok , cold start, but most end after a minute or 2.
started.

ever read the manual? its here.
use a stethoscope to find out 1 thing , which is it the chain or lifters making that noise.
ive even runs engine with the valve covers off (messy , use a blanket to catch oil flying) to find the true cause.......

read the 2.5L here. its close. (mech. parts)
read the Alldata virtual FSM.

http://www.scantool.net/software/alldata-diy-1-month-subscription.html

Sep 12, 2013 | Suzuki Vitara Cars & Trucks

1 Answer

1999 suburban lifer noise


if you have a stethascope or even a wood dowel i would check the lifters. if you have higher miles this sounds like a hydraulic lifter pumping up. if you change to a heavier oil it will go away or reduce. thats the cheap fix.

Jun 04, 2012 | 1999 Chevrolet Suburban

1 Answer

How do i adjust valves on a 4.3 vortec tbi motor


The 4.3 liter vortex uses a hydraulic lifter. There is no valve adjustment. If you hear a lifter tick than there is either a bad lifter or something broken in the valve train. Something yo can try for a sticky lifter is add 1/2 a can of seafoam motor tune the oil. Start the engine and let it run until the noise goes away. Then change the oil. If the noise doesn't go away than you have bigger issues. I have yet for the seafoam to not fix a sticky lifter especial in the 4.3 liter which we see quite often.

Jun 29, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

My son has a 1994 Buick Skylark that is experiencing a ticking with lifters. How difficult are these to replace?..Does the head have to be removed to replace them?..Thanks


What engine?

If its a 3.1 liter try this first.

Get a can of Seafoam Motor Tune which is usually available anywhere that sells auto parts and sometimes walmart or target will also carry it in there automotive section.

With the engine cold and shut off add 1/2 of the bottle to the oil. Start the engine and let run until warm or until the lifter noise has gone away. If the lifter noise stops have the oil changed and add the other half of the bottle to the clean oil. If the noise does not stop it is not a lifter noise and lilley something more severe.

I have never had seafoam not fix this complaint on any GM V-6 or V-8!

Mar 20, 2011 | Buick Skylark Cars & Trucks

1 Answer

ACURA TL 2007 HEAVY NOISE IN THE ENGINE FOR 4 5


There are two mechanical noises you will hear from an engine, lifter noise, wrist pin slap, and rod bearing noise. The only one that will go away, if at all, with engine warm-up, is lifter noise. All assuming of course, the noise is coming from the engine, and not any of the externally mounted accessories.
Have the oil changed, and continue to change every 2000-3000 miles with a good quality oil, maybe the lifter will clear itself. If it does, maintain the oil changes for the next few changes to assure it is cleaning out.
You might also try adding 1-2 pints Berrymen's Chemtool to the oil 200-300 miles before you plan to change the oil.

Dec 13, 2009 | 2007 Acura TL Sedan New Cars

2 Answers

2001 Toyota Corolla lifter noise


Check your timing or could be timing belt out of 1 tooth. This model of corolla does not use lifter.

Apr 02, 2009 | 2001 Toyota Corolla

1 Answer

Transmision level fluid Baleno esteem 2002 susuki


The proper fluid level is marked on the dip stick. With the engine running and in park, raise the hood and remove the dip stick from the autotrans filler tube. With a clean rag, wipe down the stick and then place the dip stick all the way back in the tube again, and then pull it out once more.
Holding the stick level, you can now read what the fluid level is.

If you add any fluid, do so in small amounts, such as a half a pint at a time.

Do not add fluid with engine running.

Thank you for adding your comment
Bill, ASE Master Technician

Nov 23, 2008 | 2002 Suzuki Esteem

Not finding what you are looking for?
1997 Suzuki Baleno Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...