Question about 2007 Nissan Murano SE
Sounds like the blower motor is not getting any current or has seized. check the fuse, probably blown it the motor is seized up. once the fuse is good, quickly put on full blast and hit/knock/kick the moter and see if it engages. It might if you hit hard enough, then that confirmes you ned to change the motor.
Posted on Jan 09, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I live in Alaska and have had the same problem i just added more coolent to the radiator and it warmed up i installed a block heater and i leaked a bit and the coolent level got low and i would have no heat. I tryed to fill just the coolent resivoir and that dident work so i filled the radiator pumb full and that worked!! Hope this helps.
Posted on Jan 18, 2009
sounds like a damper door in the front not working properly, these are actuated by the front temp control, the door is operated by either a manual cable, and electric actuator, or vacuum. I hope this helps you zero in on your problem. Merry Christmas
Posted on Dec 22, 2008
It appears we have an Air lock scenario and you will need to perform a system Bleed.
Park the vehicle on level ground, when cold remove coolant filler cap, start engine and leave to idle, turn heater on full and blower to max. When engine reaches operating temperature watch and listen near coolant filler, keep clear as gurgling and hopefully a boil over should occur. Top up with very warm coolant and wait as it may do it again.
Check for heat inside vehicle if warm replace coolant cap but keep an eye on temperature gauge as the ~Air lock may have moved on from heater matrix/core so proceedure needs to be carried out again from COLD.
Please press the Blue button to appraise my FREE Efforts, Thank You!
Paul 'W' U.K
Posted on Feb 24, 2009
Tips for a great answer:
Sep 30, 2016 | 2008 Nissan Sentra 2.0
Jun 11, 2016 | Nissan Cars & Trucks
Sep 11, 2013 | 1992 Nissan Pathfinder
Jan 15, 2013 | 2005 Nissan Altima
Nov 06, 2012 | 2003 Nissan Murano
Jun 20, 2012 | Nissan Altima Cars & Trucks
Dec 19, 2011 | Cars & Trucks
Oct 30, 2010 | 2003 Nissan Pathfinder
Dec 15, 2008 | 2005 Nissan Pathfinder
317 people viewed this question
Usually answered in minutes!