Question about 2011 Dodge Nitro Heat
When i turn the heat on the heay will not blow out the vents on either setting- it will make a humming sound but will not blow out the heat-you can feel it when u put your hand to the vent but it wont blow out
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you cant adjust it ,this requires the dealers computer to re set it,or a phyiscal control has packed up like a vacumn pipe has split where it pushes onto the valve that controls the flap in the heater unit.
Posted on Apr 26, 2009
if vent doors are operated by vacuum check for loose or broken vacuum hoses in the engine compartment , or check the fuse box for any ac/heat fuses if it is a electricaly controoled system
Posted on May 04, 2009
I just found my problem that often brings in a Check Engine light, and reads out a PO 442 code. When my A/C is on my heater would start working because a vacuum operated control door would slam shut when accelerating. Also my cruise control would stop when going up a large incline.
the first thing to check, and easy is the cruise control for a bladder leak. Look on the top side passenger side of the firewall, and you will find a three way vacuum hose connection. One will be a very small black plastic line that runs to the cruise vacuum actuator. Pull this hose loose at the fire wall connection. Blow in this hose, and if it will not hold pressure, and in my case I could hear air passing through it is defective needing replacement. Block off the firewall connection for A temporary fix.
Posted on May 08, 2009
From what I hear it is a vacuum line issue. Mine is doing the exact same thing. So, I am going to get a diagram and try checking the vacuum lines to see if any are loose or tore
I go under the dash and feel the air flowing out the floor and it is coming out of the defrost, also. I noticed under the drivers side today that air is flowing and there seems to be a gap in between a part under there. There was some material stuff I saw around the edge of it that sticky brown stuff and it sometimes before came out my vents all the time. Anyways, not sure if my air is just not sealed good to blow out the vents but it is something that happened not long ago and we've not done anything under our dash area.
Posted on Jun 27, 2009
Tips for a great answer:
Nov 13, 2013 | Kia Cars & Trucks
Jan 31, 2012 | 1999 Cadillac DeVille
When I turn on the heat in my 2004 mazda mpv the front air vents blow heat but the rear air vents are blowing cold. I have adjusted every setting is there something I am overlooking.
Jan 14, 2011 | 2004 Mazda MPV
Sep 24, 2010 | 1994 Buick Park Avenue
Dec 08, 2009 | 2005 Ford Explorer
Aug 29, 2009 | 2003 Hummer H2
Feb 13, 2009 | 1993 Nissan Sentra 4 Door
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: