Question about Ford Cars & Trucks

Open Question

Have 2008 crown vic police interceptor and can not get door lock actuators to work have power to switch at both front doors and yet electric locks will not work....can anyone help me with this??

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
BPALepine
  • 61 Answers

SOURCE: auxilary power, electric windows, cigarette lighter and radio not working

Since all fuses are okay, I would start my trace from the fuse box and pick the easiest wire to trace which would probably be the lighter or aux. Check for any breaks in the line or any lose connections. It seems like a harness may be disconnected or cut.

Posted on Mar 23, 2009

Ad
  • 66 Answers

SOURCE: 99 crown vic police interceptor steering wheel??

i have ran into 2 issues in these vehicles---if it binds while sitting still also, check the steering shaft, i have found the u-joints in the shaft tighten up and binds dangerously tight---if they are free, sounds like you may have a steering box issue or restriction in a line---hope this was helpful!!

Posted on Jul 07, 2009

dsakrison1
  • 65 Answers

SOURCE: 2000 crown vic police interceptor bypass a/c clutch pulley

you can get a A/C Delete kit for a Ford 4.6 liter. the 4.6 v-8 accessory drive system is all the same. You may also be able to run a line of string around the pullys, take it to your local auto parts store and they can match it up. I recomend the kit,

Posted on Oct 06, 2009

kayzack519
  • 226 Answers

SOURCE: 1993 Buick Regal - electric door locks, my Buick

did you try changing the master switch(controls all windows and locks)? i would hook it back up to the way it was and change that master switch

Posted on Dec 06, 2009

  • 1 Answer

SOURCE: 2006 ford crown victoria police interceptor power

You need to replace the switch which is not to expensive

Posted on Jun 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install a rear door enable kit on a 2011 Police Interceptor Crown Victoria so that the rear doors can open from the inside?


there should be the rods and clips inside the door if not you must go to the junk yard for the rods and the you must take off the door panel unscrew the lock mechanism at back of the door and fit the rods into the lock and the door handle then reassemble it ?????? did you check to make sure the child safety locks are not on ??? also your car may have the dark out system activated and you have to go to the dealer for that so they can reprogram the lighting control module to get the interior lights working

Nov 10, 2016 | 2011 Ford Crown Victoria

1 Answer

2002 Cadi Deville, can't get any locks to operate with remote or dash push buttons, the remote operates everthing but the locks! When the remote door lock is pressed, lites flash,horn blows locks not.


Power Door Lock Operation
The vehicle is equipped with power door locks. Each lock actuator is powered and controlled by the door module mounted in the individual door, but the rear integration module (RIM), which is the master control for the door lock system, determines when the lock functions are permitted. The RIM receives and examines the requested lock function from the individual door modules, or from the remote function actuator (RFA) via the class 2 serial data circuit. The RIM also examines the transmission shift selector position and the ignition switch position information available over the Class 2 serial data circuits. If the RIM determines that a lock or unlock function is permitted, it sends a class 2 message back to the individual door modules commanding them to perform that Lock or Unlock function.
Power Door Lock Components
The power door lock system consists of the following components:
?€¢
Driver door lock switch


?€¢
Passenger front door lock switch


?€¢
LH rear door lock switch


?€¢
RH rear door lock switch


?€¢
LH middle door lock switch (w/ V4U)


?€¢
RH middle door lock switch (w/ V4U)


?€¢
Driver door switch assembly (DDSA)


?€¢
Driver door module (DDM)


?€¢
Passenger front door module (PDM)


?€¢
LH rear door module (LRDM)


?€¢
RH rear door module (RRDM)


?€¢
Left middle door module (LMDM) (w/ V4U)


?€¢
Right middle door module (RMDM) (w/ V4U)


?€¢
Driver door lock actuator


?€¢
Passenger front door lock actuator


?€¢
LH rear door lock actuator


?€¢
RH rear door lock actuator


?€¢
LH middle door lock actuator (w/V4U)


?€¢
RH middle door lock actuator (w/ V4U)


?€¢
Driver door cylinder unlock switch


?€¢
Rear integration module (RIM)


?€¢
DRVMDL fuse (10-amp)


?€¢
PASS MDL fuse (10-amp)


?€¢
RRDR MDL fuse (10-amp)


?€¢
Class 2 serial data link

Sep 27, 2016 | 2002 Cadillac Deville

1 Answer

2006 crown Vic police interceptor former police


The police package interceptors had a common problem with the fans seizing up. There was a TSB ford released to correct the issue which called for the replacement of the electric fan assembly with an updated fan assembly.

Sep 30, 2014 | 2006 Ford Crown Victoria

1 Answer

Car door lock stuck on 1990 Ford Crown Victoria


This car came standard with power door locks and the lock actuators are frozen up and this keeps you from turning the key to open the doors.

Sep 17, 2012 | 1990 Ford LTD Crown Victoria

1 Answer

How do I disable electric door locks on 94 Crown Vic


open door find which wire going to powerr lock cut it or take door panel off reach in and unplug plug on power lock motor

Sep 06, 2012 | Ford Crown Victoria Cars & Trucks

3 Answers

On my 2000 ford crown vic. the power door locks work except for the drivers side. sounds like something is rattleing in the door. any ideas on what and how to fix


the power lock in that door may have broke the rod. remove the door panel to inspect its operation and replace the necessary part. hope this helps

Jan 31, 2011 | 2000 Ford Crown Victoria

6 Answers

How to make rear power windows on police interceptor operational


pull the b pillar cover off next to the driver's seat, there will be a connector with 2 red wires mounted to the b pillar right next to the seat belt retractor, find the other connector, and connect them. should operate normally.

Jan 28, 2009 | 2003 Ford Crown Victoria

1 Answer

Auxilary power, electric windows, cigarette lighter and radio not working


Since all fuses are okay, I would start my trace from the fuse box and pick the easiest wire to trace which would probably be the lighter or aux. Check for any breaks in the line or any lose connections. It seems like a harness may be disconnected or cut.

Oct 20, 2008 | 2008 Ford Crown Victoria

1 Answer

2003 Crown Victoria Police Interceptor has rear door locks not accessible for unlocking by passenger. What is the least expensive way to fix this?


Assuming you have played with the child locks on the doors you may fnid that your particular car is missing the linkage from the interior door handle to the door lock. Apart from making up a rig yourself I would suggest going to a breakers yard or possibly your local Ford dealer

Aug 13, 2008 | 2003 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...