Question about 1996 Lexus ES 300

1 Answer

Intermittent Wiper not working

The wipers work manually but when turned to intermittent they just turn on so there is no delay. I was trying to figure out how to take the switch off the steering colum to take it appart but it's not very obvious.

Also, My radio light just flashes off and on but won't come on.

Any help would be appreciated. Thanks

Posted by on

  • Bug Happy Jan 18, 2009

    I figured that the switch is the problem but how does it come off the steering collum?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Lexus Master
  • 78,294 Answers

U wil need to replace the wiper switch, it is the only thing that will cause this problem.

Posted on Jan 18, 2009

  • yadayada
    yadayada Jan 18, 2009

    I gave u the correct info yet get a Thanks for trying, hum. good luck on the repair.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My windsheild wipers stop in the up position on the delay setting but park all the way down when turned off. How do I fix this


You will need to diagnose this with a multi meter....on dark green terminal d at the wiper pulse board, with the wipers on any delay position, you should be reading .0005 Amps and 12 Volts and at the same time on the delay position one click below low(the fastest delay speed) you should be reading .0003Amps and 12V on terminal E gray wire, The purple wire (terminal C) should have 12V on high speed only. The yellow wire (terminal B) should have 12V when the key is on and the black wire (terminal A) should always be grounded....check all of that and we should be able to find your problem.
The Amperage should change on terminal E (the gray wire) with each position on the switch but the change will be very small. i.e. the first speed (longest delay) will read .000017 A, the second setting .00004 A and so on. Check that and let me know...(by the way, amps are checked in series with the connector so unplug it, place one probe in the connector and the other in the motor plug terminal. )

Sep 30, 2016 | 2004 Pontiac Montana

2 Answers

The windshield wipers on my 2001 Chevy Venture wont work in the "delay" positions...could this be a fuse/relay problem?


Most likely a little circuit board that controls the wiper delay, or the wiper switch itself has gone bad and has an intermittent break.

Feb 27, 2015 | 2001 Chevrolet Venture

2 Answers

Why my windshield wiper only works on high and don't work on delay?


There is a wiper delay module under the dash that has failed. Windshield Wiper Switch MOTORCRAFT SW-5665

Sep 17, 2014 | Cars & Trucks

2 Answers

Wiper delay does not work


Intermittent wipers: Inside the wiper motor (of most cars) there is a diode or diodes. They burn out or they break. If you replace the diodes the intermittent wipers will work again. If you cannot replace the diodes, replace the wiper motor completely (used or new)

Apr 17, 2014 | 2003 Dodge Neon

1 Answer

Winshield wiper delay intermitent module making noises


The wiper delay is in the steering column. It's a small box about 2 x 2 inches with a wiring harness attached. With the testing procedures I found below, you should be able to figure it out. I found wiper delays on eBay for around $10 to $20. Good luck.

WINDSHIELD WIPERS CHEROKEE, COMANCHE & WAGONEER 1. POWER INPUT Remove circuit breaker. Test battery side of circuit breaker. If battery voltage is not present, repair open to splice. Test across circuit breaker terminals. Tester reading should be zero (0) ohms. If not, replace circuit breaker. 2. GROUND Connector A unplugged. Test terminal G. Tester reading should be zero (0) ohms. If not, repair open to ground. 3. INTERMITTENT WIPERS Ignition switch in ACCY. Remove delay module and plug connectors together from the module. If wiper operate in LO and HI speed modes and mist (washer) is working, if wipers and mist operate, replace intermittent module. If not go to step 4. 4. WIPER/WASHER SWITCH Ignition in RUN, wiper switch position as indicated, back probe switch side of connector A for standard, connector B for intermittent: Test connector terminal E-wiper switch in LO and mist/intermittent. If battery voltage is not present, replace switch. test connector terminal C-wiper switch in HI. If battery voltage is not present, replace switch. Test connector terminal F-wiper switch to OFF. If battery voltage is present until wipers stop and then voltage drops to zero (0), system is working fine. If this does not occur, replace switch. 5. INTERMITTENT WIPERS Connector B unplug. Test across terminal A and D while rotating switch from minimum to maximum delay. If tester reading is not between 0-500 ohms, replace switch. Test across terminal A and G while rotating switch from minimum delay to maximum delay. If tester reading is between 0 and 500 ohms, replace wiper module. If not replace switch. 6. WIPER MOTOR Ignition in ACCY, wiper switch position as indicated, probe connector D. Test connector terminal 1. If resistance is no zero (0) ohms,repair open to ground. Test connector terminal 4-wiper switch in any position. If battery voltage is present, replace motor. if is not repair open from fuse panel. Test connector terminal 2-wiper switch in LO. If battery voltage is present, replace motor. If not , repair open from wiper switch. Test connector terminal 2-wiper switch in HI. If battery voltage is present, replace motor. If not , repair open from wiper switch. Test connector terminal 5-wiper switch OFF with voltmeter connected. If battery voltage is present until wipers stop and then voltage drops to zero, system is OK, replace motor. If not, repair open from wiper switch.

62217_jeep1_1.jpg


62217_jeep2_1.jpg

Found on the web. I hope this helps.
Rich Long

Jan 26, 2014 | Jeep Cars & Trucks

1 Answer

Wipers swipe in off position randomly


Known issue with circuit board mounted on wiper motor. Has glitch which causes phantom sweeps. suggest replacing circuit board.

Aug 17, 2009 | 1998 Mercury Villager

1 Answer

Intermittent windshield wipers


If it's not the switch, it's the electronic board in the wiper motor. If it's you can pick the board up at The Auto Zone less then at the dealer and they can help you determine if it is the board. Good luck

Apr 08, 2009 | 2003 Chevrolet Cavalier

1 Answer

Delay wipers don't work.


Try making sure the connection is good.
If it is then you should try replacing the wiper switch.


Brandon Bird

Jan 25, 2009 | 1999 Jeep Cherokee

1 Answer

Instructions for turning on back screen wiper on Ford mondeo 1.8


2 ways this could work. 1 is by pushing the wiper switch towards the dash.

2nd is when you pull the lever towards you, it will turn the intermittant wipe on, pull it towards you again to cancel.

TL

Jan 12, 2009 | 1999 Ford Contour

2 Answers

2000 Chevy Malibu wiper delay and intermittent won't work.


I had this problem (wipers only work on high) with my 2002 Chevy Malibu and had to replace the 6 amp diode (22059733) on the wiper control board. It is connected to the back of the wiper motor and is held on by 3 torx screws.
Radio Shack has them for $2.75 6A, 50V Rectifier Diodes (4-Pack) Model:276-1661

Dec 11, 2008 | 2000 Chevrolet Malibu

Not finding what you are looking for?
1996 Lexus ES 300 Logo

Related Topics:

665 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

917 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...