Question about 2007 Mercedes-Benz Mercedes Benz Clk Class

1 Answer

Warning light does not go out when footbrake is released via the pull release handle

Posted by on

  • anthony kelly Jan 01, 2013

    any ideas anybody

  • collegetutor
    collegetutor Jul 10, 2014

    The problem is easily solved my lubricating the foot brake cable with some silicon grease. Th ebest place to buy it is from a pro bicycle shop, because pro bikes use lots of cables and they need to work perfectly when shifting their many 20+ gears.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 125 Answers

The problem is easily solved my lubricating the foot brake cable with some silicon grease. Th ebest place to buy it is from a pro bicycle shop, because pro bikes use lots of cables and they need to work perfectly when shifting their many 20+ gears.

Posted on Jul 10, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
dttech
  • 4803 Answers

SOURCE: c320 hood release handle won't pop the hood

I don't think there is a day that goes by in the shop where we don't get at least one vehicle that is doing this. Just use two people. One to pull the cable release and the other to slap the hood with their hand and tell it to cooperate. Usually, just a little "jarring" with the cable pulled will get it to pop up.

Posted on Apr 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can open my trunk doesn't work with remote or from inside of glove compartment thanks 2005 ssr chevorlet


Rear Compartment Lid
The rear compartment lid can be opened by operating the rear compartment lid release switch, located on the instrument panel, or by using the manual release located on the rear compartment lid. Battery voltage is supplied to the rear compartment lid release relay through the Main Power fuse. The roof and door module (RDM) receives the rear compartment lid release request via the rear compartment lid release switch signal circuit. The RDM grounds the rear compartment lid release relay coil when a release input is received through the instrument panel (I/P) switch. Grounding the coil causes the rear compartment lid release relay to energize, providing power to the rear compartment lid latch assembly through the rear compartment lid release actuator supply voltage circuit.
As an alternate method of operating the rear compartment, an emergency release handle is accessible from within the rear compartment. When the handle is slightly pulled, it will provide a ground for the bed cover release relay which will cause the actuator to operate and open the rear compartment lid. If the handle is pulled further, it will mechanically open the lid, so even if the battery is discharged or there is an electrical concern, the emergency release handle will mechanically open the lid.

As an alternate method of operating the rear compartment, an emergency release handle is accessible from within the rear compartment.

Jan 01, 2017 | Cars & Trucks

1 Answer

90 cadillac sedan sevelle which way do i pul to get brake to releade


Just try to push down a little on the e brake pedal and release because if there is a release handle you can only pull it . I had a 2000 Seville and you just push lightly and release the pedal no release handle

Jul 24, 2014 | Cars & Trucks

1 Answer

Parking brake stuck


footbrake kind or handbrake lever.. spray wd40 on the cable where it enters the sheath and work it on and off.. also check the cables where they are located near the back wheels and spray these also.. they rust up and stick ..lever style e-brake has a button on the lever that must be pushed in to release..if jerked up to hard by a strong arm it will be tough to release it.. calls for 2 hands to pull up and push the button at the same time..foot brake requires pushing down while pulling the hand release and see if it works.. repost please..

Jan 20, 2013 | 1999 GMC Sonoma

1 Answer

When the parking brake is unset the warning light stays on how do i get it off its on my 2000 explorer


Try pulling release handle and pulling up on the e-brake pedal.then afterwards adjust parking brake.

Sep 11, 2012 | 2000 Ford Explorer

1 Answer

Remove door panel


Expedition Trim Panel Removal

NOTE The door glass must be completely raised.
  1. Remove the window control switch plate.
  2. Remove the door handle bezel.
    WARNING To avoid damage to the door trim panel, lift the door trim panel by pulling directly upward on the armrest to disengage the panel clips.
  3. Remove the two bolts and three screws, and remove the door trim panel.
  4. Remove the finish cover to access the two center screws.
  5. Disconnect the electrical connectors.

    zjlimited_454.jpg

    Fig. Expedition - Trim Panel Screws shown

  6. Remove the door handle bezel.
  7. Use service notch.
    WARNING To avoid damage to the door trim panel, lift the door trim panel by pulling directly upward on the armrest to disengage the panel clips.
  8. Remove the two bolts and three screws, and remove the door trim panel.
  9. Disconnect the electrical connectors.

    zjlimited_455.jpg

    Fig. Navigator - Trim Panel Screws shown

  10. Position the water shield aside.
  11. If equipped, disconnect the lock cylinder rod.
  12. Disconnect the exterior door handle actuating rod.
  13. Remove the bolts and position the front door latch aside.
  14. Disconnect the electrical connectors.
  15. Release the interior door handle cable and remove the front door latch.
  16. Position the cable cover aside.
  17. Release the conduit and the interior door handle cable.
  18. Release the locking tab and remove the front door lock actuator.
  19. To install, reverse the removal procedure and note the following:
    1. Tighten the door latch screws to 80 inch. lbs. (9 Nm).

This procedure is followed to check and fix door locks.

Hope helps.

Jan 12, 2011 | 2001 Ford Expedition

1 Answer

Handbrake failing to engage,any solutions ?


Look under vehicle and see if cable at equalizer is hanging low. If it is or there is a lot of slack in it, then you just need an adjustment.
Basically, release brake handle, loosen the already loose cable (via equalizer nuts). pull handle back about...8 to 10 clicks/ notches. Then tighten equalizer nuts. Check it by releasing handle and this should release the rear wheels.Pulling handle up should apply parking brakes

Jul 06, 2010 | 2006 Volkswagen Passat

2 Answers

How do I disable brake warning light and buzzer on 93 LaSabre?


have you checked the brake fluid level? what is the label for fuse #6???

Sep 27, 2009 | Buick Century Cars & Trucks

2 Answers

I released the parking brake on my 02 Chevy Tahoe and the handle (on the dash, not center console) hyper-extended and the brake would not release. I thought I would try to pull the wire with pliers but...


Hello all, this happend to my 2002 taboe as well. There is a handle under the dash below the steering column. The handle is conected via a cable to the parking brake foot mechanism. This cable is known to break. This part is available online through numerous websites for roughly 17-25 dollars, ebay has it but it goes for roughly 35 dollars. It is very easy to install with a pair of pliers and a wrench. The cable is about a foot long and comes with the release lever already installed.

Mar 15, 2009 | 2002 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...