Question about 2004 Dodge Neon

Open Question

Where is the EVAP canister on a 2004 Dodge Neon

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
keithheavili
  • 410 Answers

SOURCE: im getting a P0441 EVAP emission control system

Here is what I could find for your code error as potential causes:
After market parts and accessories nonconforming to the EVAP system specifications.
Damaged, missing or improperly installed fuel filler cap.
Blockage in fuel vapor hoses/tubes (EVAP canister tube, EVAP canister purge outlet tube or EVAP return tube) in EVAP system.
Disconnected or cracked fuel vapor hoses/tubes in EVAP system.
EVAP canister purge valve stuck closed.
Canister vent (CV) solenoid stuck open.
Fuel tank pressure (FTP) sensor malfunction.
EVAP canister leaking.
Fuel vapor control valve tube assembly blocked.
Fuel vapor vent valve assembly blocked.

Obviously the gas cap would be the easiest and cheapest thing to fix.  Just make sure it is put on correctly and tight.  If it is not that, I would have to suggest to take it to a mechanic because the other problems on that list are not really DIY material.  Hopefully it is the gas cap and you can take care of it yourself.  Good luck.

Posted on May 17, 2009

Ad
  • 512 Answers

SOURCE: how do i change my fog lights to my 2004 dodge neon

you need to remove the 2 nuts from under the fascia that hold the assembly in. this will give you access to the bulb

Posted on Jan 11, 2009

freetek
  • 5568 Answers

SOURCE: Evaporative emission system - small leak/no BB flow condition

Although I recommend you buy a Haynes service manual for your Dodge, I think you will find the canister attached to the firewall or one of the fender wells. Most of them look a lot like an overgrown spam can and it will have two connections on it.

Posted on Mar 06, 2009

aberry9036
  • 49 Answers

SOURCE: 2004 Dodge Neon will not reverse.

Sounds like it could be worn gear linkages, which would stop you from being able to push the gearstick in to the reverse gate (usually by pushing the gear stick down or pulling a lever up under it). If you can get under the car take a look, there should be a set of joined poles leading out from where your gear lever is, check that all the connections on these are reasonably tight.

Posted on Aug 04, 2009

  • 14036 Answers

SOURCE: 2003 Dodge Neon has a pp0340 , 440 codes I think

CODE PO340 NO CAMSHAFT POSITION SENSOR CIRCUIT FAILURE.CODE PO440 EVAP PURGE SYSTEM FAULT.POSSIBLE CAUSE THE EVAP PURGE VALVE VACUUM SUPPLY IS LEAKING OR CLOGGED.OR THE EVAP PURGE SOLENOID HAS FAILED.

Posted on Oct 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does this code P0441 mean for engine light on 2004 dodge ram 1500 truck?


2004 Dodge Ram 1500 Truck Code P0441 indicates that a part of the EVAP control system is no longer functioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.
EVAP emission canister purge is controlled by a valve which allows engine vacuum to pull stored fuel vapors from fuel tank into the engine to be burned, rather than be vented to atmosphere. A vacuum switch is used to detect when flow exists. If the PCM commands purge and sees that the switch is closed (indicating no detected purge flow) P0441 is set.

Symptoms :

Likely, no symptoms will be discernible to the driver, other than the illuminated Check Engine Light.

Causes :

A code P0441 could mean one or more of the following has happened:

Bad vacuum switch Broken or damaged EVAP line or canister Open in PCM purge command circuit Open or short in Voltage feed circuit to Purge Solenoid Faulty purge solenoid Restriction in EVAP solenoid, line or canister Corrosion or resistance in purge connector Bad PCM

Possible Solutions :

With a P0441 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try: Common Chrysler fix - Replace Leak Detection Pump / LDP Repair damaged EVAP lines or canister Repair open or short in voltage feed circuit to Purge Solenoid Repair open in PCM purge command circuit Replace purge Solenoid Replace vacuum switch Repair restriction in Evap line or canister or solenoid Repair resistance in purge connector Replace PCM

I hope this helps.

May 08, 2015 | Dodge Cars & Trucks

1 Answer

Where is the vaccum located on 2005 dodge neon


Sounds like you mean the problem could be a leak in the EVAP system. The computer vents the gas tank to the vapor canister several times while you are driving.
The engine produces vacuum when it is running.
Do you have the actual trouble code ?

Feb 19, 2013 | 2005 Dodge Neon

1 Answer

Where is the carbon canister located on a 2004 dodge neon


Its under the right rear of the vehicle near the gas tank.

Apr 24, 2011 | 2004 Dodge Neon

1 Answer

Engine light on diagnosed PO44O dodge said probably the purge control solonoid. where is this located on a 2004 dodge neon?


Try checking the gas cap first off. 95% of the time, an EVAP code, (purge solenoids, or any EVAP code) could be caused by a lose gas cap, or a defective gas cap.

And I know on SOME neons, the evap canister purge solenoid is located on a bracket attached to the air cleaner. Hope this helped.

Feb 25, 2011 | 2004 Dodge Neon

1 Answer

Dodge neon code p0456


What does that mean? The Powertrain Control Module (PCM) at different times performs various tests on the EVAP system. OBD II Enhanced EVAP systems are in place to keep fuel tank vapors from venting into the atmosphere, and instead purges them into the engine to be burned. Regular pressure tests are conducted by the PCM to monitor the sealed system for leaks. The PCM monitors the EVAP system pressure by watching the fuel tank pressure (FTP) sensor. When the sensor indicates a small leak in the EVAP system, this code is set.
FB.init("dd7d9e9681341cde77587bc6a2029f6f"); OBD-Codes.com on Facebook Potential Symptoms There will likely be no noticeable symptoms other than the Malfunction Indicator Lamp (MIL). This is because the EVAP system is a closed system and only controls fuel tank vapors, not engine management.
Causes Usually this P0456 code is caused by an incorrect or faulty gas cap. Filling the fuel tank2_bing.gif with the engine running could conceivable cause this code as well or if the cap wasn't properly tightened. Any of the following could also be the cause:
  • A small leak in any of the EVAP hoses or fuel2_bing.gif tank hoses
  • A small leak in the purge valve or vent valve
  • The EVAP Canister may be leaking
Possible Solutions First, using a scan tool activate the vent solenoid, sealing the system. Then monitor the fuel tank pressure (FTP) sensor. If the system is sealing properly, the number will stay consistent. If is isn't, the pressure sensor will show that as well. If the system slowly leaks, use a smoke machine and watch for smoke exiting the system at any EVAP component. Any where there is smoke exiting the system, that is the faulty component. Do not pressurize the EVAP system with air pressure. Doing so can damage the purge and vent solenoids in the system.

May 25, 2010 | 2004 Dodge Neon

1 Answer

Is there a recall on the evap canisters gasket on a 2004 dodge ram1500


There is no recall on the evap canister... there are three recalls on your model.

  1. ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR
  2. POWER TRAIN:AUTOMATIC TRANSMISSION
  3. EQUIPMENT:OTHER:LABELS

http://www.lemonauto.com/complaints/daimler_chrysler/dodge_ram1500.htm

Jan 19, 2010 | 2004 Dodge Ram 1500

1 Answer

My 2005 neon failed emissions. It gave me a codes 0441. What excatly does that define?


Trouble Code: P0441 (2.0L L4 VIN C Auto)
EVAP Purge Flow Monitor Fault Print this code dataprint_icon_codes.gif Number of Trips to Set Code: 2
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Trouble Code Conditions:
Engine at idle speed in closed loop for 200 seconds, BARO Sensor signal less than 8,000 feet, ECT Sensor more than 160ºF, no Low Fuel, MAP Sensor signal less than 23.7" Hg, and the PCM did not detect any purge flow through the EVAP system during this test.

Possible Causes:
  • EVAP purge solenoid vacuum line loose, leaking or restricted
  • EVAP purge solenoid stuck leaking, stuck open or stuck closed
  • EVAP purge vacuum line to canister leaking or disconnected
  • EVAP canister leaking, damaged or has failed

2005 Dodge Neon - All Configurations - P0441

Nov 01, 2009 | 2005 Dodge Neon

1 Answer

MY 2002 NEON HAS 2 CODES P0442 AND P0455 I HAVE CHANGED THE FUEL CAP BUT STILL KEEP COMING BACK


both those codes point towards evap system leak, p0442 being a small leak and p0455 being no purge or large leak, check the charcoal canister and linds attached to it for holes.

Oct 27, 2009 | 2002 Dodge Neon

1 Answer

Im getting a P0441 EVAP emission control system purge flow fault code on my 2002 dodge neon


Here is what I could find for your code error as potential causes:
After market parts and accessories nonconforming to the EVAP system specifications.
Damaged, missing or improperly installed fuel filler cap.
Blockage in fuel vapor hoses/tubes (EVAP canister tube, EVAP canister purge outlet tube or EVAP return tube) in EVAP system.
Disconnected or cracked fuel vapor hoses/tubes in EVAP system.
EVAP canister purge valve stuck closed.
Canister vent (CV) solenoid stuck open.
Fuel tank pressure (FTP) sensor malfunction.
EVAP canister leaking.
Fuel vapor control valve tube assembly blocked.
Fuel vapor vent valve assembly blocked.

Obviously the gas cap would be the easiest and cheapest thing to fix.  Just make sure it is put on correctly and tight.  If it is not that, I would have to suggest to take it to a mechanic because the other problems on that list are not really DIY material.  Hopefully it is the gas cap and you can take care of it yourself.  Good luck.

May 17, 2009 | 2002 Dodge Neon

1 Answer

Dodge Neon code 1494


p1494 isnt for the purge solenoid it is for a mechanical switch failure detected in the leak detection pump. as long as the pump has vacuum going to it the likely cause is the pump itself. it is attached to the vapor canister

Dec 06, 2008 | 1997 Dodge Neon

Not finding what you are looking for?
2004 Dodge Neon Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...