Question about 1990 Chevrolet K1500

1 Answer

Are there fuses for 4x4 - 1990 Chevrolet K1500

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 83 Answers

There are fuses for the 4x4 system check your owners manual for a description and location of the fuses. There is a electrical solenoid actuator on the transfer case which engages the 4x4.

Posted on Jan 01, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 05 dodge 1500 the 4x4 switch an overhead console leds quit working an keeps blowing the fuse as soon as i put it in


Odd that your vehicle runs both systems on the same circuit and with only a 10 amp fuse. I'd try a 20 amp fuse to see if that works. Worth a shot, it shouldn't harm anything.

Dec 16, 2014 | 2005 Dodge Ram 1500

1 Answer

Tahoe 4wd Problem


bigger fuse means melted a wire someplace. bad idea on your part.

Jul 16, 2017 | Cars & Trucks

1 Answer

I have a 93 gmc sierra 1500 4x4 every time i engage it into 4x4 it blows the 4x4 fuse


Try unplugging the front axle actuator (at the front differential). If the fuse stops blowing, you have a short inside the actuator.

Feb 02, 2013 | 1993 GMC Sierra K1500

1 Answer

Where are the fuses for the 4x4 located on a 05 envoy


This not a fuse problem. When you switch to A4WD or 4HI, do the indicator light for those positions stay on solid or do they blink and then return to 2HI position? If so, then there is probably a problem with the transfer case actuator/motor.

Aug 10, 2012 | 2005 GMC Envoy

1 Answer

Fuses kept blowing on 4x4 on 1997 chevy s-10. replaced transfer case motor, sensor and switch on dash. still no 4x4. leaking hose found and still no 4x4. now a/c and heat come out defrost vent. can...


No this is not a related problem.
To find what is blowing fuse out need to use ohm meter see which side short is on at fuse then trace to find short to ground.

May 22, 2012 | Cars & Trucks

1 Answer

I have a 2002 trailblazer the 4x4 switch on the dash is not lite up and the 4x4 don't work any help


Try to locate a blown fuse in your fuse block first. Could be a simple problem. Check the fuse first.

Dec 05, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

My 2006 f150 4x4 lariat has no power to the Ac compressor or the 4x4 solenoid


Fuse 11 is the common fuse to the 4x4 system & the AC.
for the AC it operates the AC clutch solenoid
for the 4x4 it powers the IWE ( Integrated Wheel Ends ) Solenoid.

Check Fuse #11 with a meter on both pins on the back while installed ( fuse is hot at all times )

May 24, 2011 | 2006 Ford F-150

1 Answer

I HAVE A 93 S15 JIMMY 4X4. NO POWER TO 4X4 SWITCH


Try pulling the 5 amp fuse on the fuse box under the drivers side of dash that says tccm (transfer case control module) for 2 1/2 minutes, replace the fuse after 2 1/2 minutes then cycle the switch on and off without starting the engine 5 times. This resets the module.

Dec 06, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

S10 4x4 wont work


check the fuses supplying the front viscous-coupling system solenoids, there should be at least one fuse for this marked AWD or 4WD. Also the locking hubs or the front differential may be damaged from engaging 4x4 while moving.

If it is an auto then the fuse or box fluid levels are likely areas to check.

If the fuse is found to be intact, check the relays click when 4x4 is selected, and replace the necessary relay if it does not operate.

You will need the service manual for your car to locate and identify the correct electrical equipment for the 4x4 function.

Oct 24, 2009 | 1994 Chevrolet S-10 Blazer

2 Answers

4x4 F-150 2004 4X4 WILL NOT ENGAGE


You can check to see if there is a relay or maxi fuse in the engine compartment. The circuits/solenoids are known to go out alot in these in the fords.

Sep 13, 2009 | 2004 Ford F150

Not finding what you are looking for?
1990 Chevrolet K1500 Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...