Question about 1998 Chevrolet S-10 Pickup

2 Answers

Changing wiper motor in chev s10

Is it difficult to change wiper motor in 1998 chev s10?

Posted by on

  • Anonymous Feb 05, 2009

    The motor stops when i have the wiperblades on for a while.
    Is this a problem in the motor or that other timing thing?

  • Anonymous Mar 19, 2014

    94 S10 wipers won't work but got a new motor installed

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It's not bad. They make a special tool to remove the motor from the arm assembly, but with a little determination I was able to remove it with out the tool. If your wipers aren't working try running power to the motor first to test it. I swapped it out and the problem ended up being a bad ground in the switch. I bypassed that for a little while by running a jumper wire from the engine block to motor. It also could be the pulse module they are known for going bad in GM vehicles.

Posted on Jan 21, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Wolf ...where is the wiper motor location in a s10 che.

Posted on Mar 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change wiper switch on 1983 chev s-10


The Chevy s10 had a recall on the wiper motors for a few years...I need to know if your are changing the complete motor or just the motor internal board...?

Feb 18, 2015 | Chevrolet S 10 Cars & Trucks

1 Answer

1998 s10 wiper motor


If it has intermittent wipers,the pulse board on the motor
is commonly bad,just 3 screws to change it ,part is about
30 bucks

Feb 11, 2013 | Chevrolet 1500 Cars & Trucks

1 Answer

Window wipers sticking


How to change a wiper motor & repair wiper mechanism on 1998 Audi A4

First time you must diagnose why windscreen wipers going slow and/or stopping.
In order to find out the cause of wipers stopping you can try follows:

1. Carefully extract the wiper arms from their axles (two pieces). In some cases you need to use an extracting tool. Heed of the windscreen !!!
2. Disassemble the plastic covers from the bottom of the windscreen.
3. With the bonnet up you can start the engine, (transmission in "N" or "P" position and parking brake on). Now you must switch on the control lever of the wipers, and go to the engine compartment. If the wiper motor runs let the wiper motor running for a few minutes and switch off. Go to the step 4. If the wiper motor do not runs you must check first the electrical feeding of the motor. It is necessary to unscrew three bolts of the mechanism and disconnect the electrical coupling (difficult assurance). If the electrical feeding is OK you must replace the motor - steps 5, 6, 7. If not you must check electrical connections, the control switch of wipers and electric cables.
4. Now you must check the two bearings of wiper mechanism with your hand. In the most cases the left bearing is out of order (is very hot). This is the most encounter fault of the wipers running at Audi.
5. For have enough space to manipulation the wiper motor together with their mechanism you must extract the plastic cover of the engine computer box, and extract also the box screws. Then you can move slowly the engine computer box, just for a few milimeters.
6. You must disconnect the electrical coupling of the motor (difficult assurance), unscrew three bolts of the mechanism and extract together with the motor. You must move them slowly between windscreen and engine computer box until the wiper motor go out together with the mechanism. This is the most difficult operation!
7. Now you can repair the bearings, replace entire wiper mechanism or replace the wiper motor. It is not very simply, but it works.
Heed of the windscreen !!!
Refit all in reverse order.

May 22, 2011 | 1998 Audi A4

1 Answer

Sometimes my blazers wipers work fine. Other times they are intermittent. Still other times they won't turn of by the switch but eventually do on their own. When I lift the hood and tap on the black cover...


These systems use a module attatched to the front of the wiper module, screwed on by 3 torx head screws. The wiper motor is mounted to the firewall on the driver's side. Check with Cardone. They sell the module for about $35 plus shipping. This problem is very common for this system. Let me know if you need anything else.

May 07, 2010 | 1998 Chevrolet Blazer

1 Answer

Windshield wipers dont work all the time


very common chev problem. tap on the circut boart part of the motor and see if they start. replace the circut board only, you do not need the whole wiper motor

Dec 08, 2009 | 1998 Chevrolet Blazer

3 Answers

1998 c1500 chev p.u. windshield wiper motor no go any speed


Beyond the obvious answer of replacing the motor itself, check the fuse, and bad wiper switch, it could be just the auto-park switch on the wiper motor that is worn out.

Oct 23, 2009 | 1998 Chevrolet C1500

1 Answer

Wipers swipe in off position randomly


Known issue with circuit board mounted on wiper motor. Has glitch which causes phantom sweeps. suggest replacing circuit board.

Aug 17, 2009 | 1998 Mercury Villager

1 Answer

I NEED TO CHANGE THE WIPER MOTOR ON MY 99 FORD EXPEDITION. I AM FAIRLY MECHANICAL, CAN I DO THIS WITH OUT TECHNIANS HELP?


The wiper motor replacement is not a difficult operation, just ensure connectors are firmly attached to the motor, and that wipers are working after installing the new motor.

Follow instructions on link below:

How to Change a Windshield Wiper Motor on a Ford Expedition

Jun 21, 2009 | 1999 Ford Expedition

4 Answers

Need wiring diagram


i dont think u need a wiring diagram. you should check your wiper motor circuit board first. on my 94 s10 the wipers either worked when they wanted to and now they dont work at all. just either replace the circuit board yourself ($19.95 on ebay) or replace the whole wiper motor ($60 on ebay) and your wipers should work. just give this a shot as its a good place to start. i myself am going to replace the wiper circuit board as its cheap, and really easy to access and replace. all you need is a screw driver. good luck. and no, im not a GM Technician. just owned my truck since day 1 and always try to check vehicle forums for answers first.

Aug 01, 2008 | 1994 Chevrolet S-10

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

1,358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...