Question about Toyota Camry
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.
Posted on Dec 15, 2008
There is a VSV (vacuum switching valve) , usually mounted on the back side of engine block, under the intake manifold, as well as the map sensor, that can also cause that code if one or the other is faulty. It takes some pretty detailed troubleshooting to confirm this in some cases, so if that's not in your line of work, you may have to have it properly diagnosed, or take a 50/50 shot at which one first.
Posted on Jan 24, 2009
That code is for the evaporative emmisions system. Here is a link to an open forum you can go to, this will help you understand what it is, and why. The vehicle on the site is a van, but the code, and parts involved are one in the same, so don't worry about the difference in vehicle. The van is a toyota, and this is the information on the p0446 code. Hope this helps you.
Posted on Mar 08, 2009
There are several fuse blocks. (Oh joy, huh?)
1.One is a rectangular black plastic box, with one corner cut off. It's next to the battery. You depress tabs on the cover sides, to remove the cover. Underneath the plastic lid is the fuse and relay information. (What they are, where they're located)
2.On the passenger side, down by the right foot, is a kick panel, (In front of the door) This panel is removed to access another fuse block. The information is on the inside of the panel cover.
3.There may be one behind the left side kick panel.
4.1994-1996 models, have a fuse panel on the left side of the dash. To the left of the steering wheel, behind a coin box. I brought this up just in case.
The backside of the coin holder has the fuse locations. I see Stoplamp listed, and it's 15 Amp. Tail is listed too, and it's a 15 Amp blade fuse also.
Posted on May 10, 2009
check air filter for dirty , how many miles or kms have your car? , maybe need to replace spark plugs, try to reset the ecu for a momentany malfunction, remove the negative battery terminal few minutes and reconnect,start engine and drive, check if lights goes off , please write me
Posted on Jul 05, 2009
Tips for a great answer:
Jul 09, 2016 | 2002 Toyota Camry Solara
Feb 24, 2015 | 2009 Toyota Camry
Feb 09, 2012 | 2006 Toyota Highlander
Jan 15, 2011 | 2003 Toyota Camry Solara
Sep 20, 2010 | 1997 Toyota Camry
Feb 17, 2010 | 1999 Toyota Camry Solara
Feb 03, 2010 | 1998 Toyota Camry
Dec 15, 2009 | 1999 Toyota Camry
Apr 05, 2009 | 1997 Toyota Camry
Mar 29, 2009 | 1997 Toyota Camry
101 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: