Question about Cars & Trucks
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
no connection of the two, start by checking switch for heated seat, if power is there and switch is good then heating element is probaly bad,the lock could be linkage jam or lock acuator, good luck.
Posted on Oct 27, 2009
Have you tried pulling it out real slow.. Also make sure car is stopped when putting it on.. Any fast forward movement locks the belt.. hope this helps
Posted on Jun 30, 2008
sounds like the rods are disconnected the clips hold the rods in place the latching mechanism holds the handle in place as well did you replace the speakers or did a shop? if a shop did then they caused this if you did then you may have caused this either way untill you reattach the rods none of it will work. you will have to manually open the door at the latch from inside teh door behind the panel.
Posted on Jul 19, 2008
You'll need to replace the solenoid (motor) that doesn't work. Not hard once you get the door panel off. I suggest you buy the correct part, not a universal one.
Posted on Jul 14, 2009
SOURCE: front door speakers
i found the service buliton on this problem straight from GMC, bulletin No. 07-08-44-008 this is a recall issue and you need to go to the dealer to have them resolve.. i was locked out of your other question please rate this with the other one you have up... thank you Dave
Posted on Sep 03, 2009
Tips for a great answer:
May 13, 2014 | 2007 Nissan Frontier SE Crew Cab
Oct 08, 2013 | Nissan Cars & Trucks
Jul 10, 2013 | Cars & Trucks
Oct 12, 2012 | Cars & Trucks
Apr 27, 2010 | 2004 Nissan Titan
Mar 20, 2010 | 2008 Nissan Titan
Feb 06, 2010 | 2004 Nissan Titan
Jan 07, 2010 | Nissan Armada Cars & Trucks
228 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: