Question about 2006 Suzuki Aerio

1 Answer

Starter stalls when turning on

The dealer has changed the starter five times, it has been working for two to three month then it will start to fail again, on the third change the dealer shop has install a relay for a stronger voltage to the starter. I don't know if I need to change battery cable or key switch. need help please.

Posted by on

  • fuentes_migu
    fuentes_migu Jan 08, 2013

    I have notes that almost all Suzuki cars has the same problem that I do , Car wants to start but the starter don't seems to have enough power to turn over the motor, many of time on a cold or hot engine at times it will stall, I don't know if is the cable to the starter that dose not have juice to run thou the cable line? ground it has good stater it can't be due that it has been change in numbers of times it also has a relay inline to the selinorde .



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    Visited the website for 3 consecutive days.


    An expert that hasĀ over 10 points.

  • Contributor
  • 18 Answers

Sounds like a grounding problem check all the grounds to make sure there not rusted

Posted on Jan 01, 2013


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 405 Answers

SOURCE: won't start not even click

I am pretty sure you have a bad solenoid on your starter. Sometimes if you tap on them while someone holds the key in start they will make contact and it will start. Best solution is replace solenoid. You can check it by having someone hold the key in start and measure the voltage from the small wire to ground, if it is bad you will have voltage but it will not even click. Hope that helps you.

Posted on Dec 18, 2008

  • 117 Answers

SOURCE: Electrical headlights cut out

first check fuses if it is not this you will need to take to an auto electrician to find if there is a short in the headlight circuit

Posted on Jul 01, 2008

  • 62 Answers

SOURCE: my 2004 suzuki aerio would not start last year. I

your comp is not reaspondig/acting the way it shoud so until everything is new it aint gunna start because it only starts wen u put something new comeone just think about it

Posted on Feb 18, 2010

  • 1857 Answers

SOURCE: Seems like a starter or battery problem-truck is slow to star.

Look at the voltage while the its cranking. If it drops to below 11 volts clean the terminals. If they are clean and it still drops to below 11v replace the starter. Get it tested first.. If the battery and terminals pass, then replace the starter. But to do this correct go to any mechanic or even an auto zone. They can test the battery, charging system and alternator in about 5 minutes with a special tool.

Posted on May 25, 2010

  • 4536 Answers

SOURCE: My Maruti zen 96 model

a number of things cud be failin--however go and titen the cables on the battery 1st-and maybe at the starter--its a common problem that fools even the pros--if it doesnt help then inspec other wiring or get car scanned--u mite test batt if over 3 yrs and also starter plus solenoid--but dont replace parts at whim

Posted on Jan 06, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Delay start

this is an ignition problem . and yes it will fail totally sometime it is a dealer fix however

Sep 28, 2013 | Toyota Sequoia Cars & Trucks

1 Answer

2008 Jeep Liberty Starter Issue

cant figure out your post at all !
"When my car will not start it only growls & never roars/never turns over."
it either cranks robustly nor not
then and only the can it start, run
or maybe stalls
the dealer can fix it , if you demo it and it works.
its not broken then.
if it cranks correctly every time ,say so
that is a failed engine start.
if engine stalls, say so.
if rpm on the engine is real low, too low, say so.

the word turns over means nothing, Im sorry
1/2 say, it means cranking
other 1/2 means its running,
the order is
cranks, starts, runs , and keeps running or stalls.
btw if it stalls, its needs a tuneup'
get one in last decade, (sparks filters)
my guess growls is starter sounds
so if it starter works try cranking with throttle wide open
this is super secret unflood mod. it cuts fuel and clears flooding.
Good engines that fail to start are
bad spark plugs
starving for fuel.
we discount them 1 by one until. bingo

Mar 08, 2017 | 2008 Jeep Liberty

1 Answer


youv'e engaged the security check security fuses to disarm you'll need to go to your gm dealer to reset they have several proceedures usually with key in on position for three sets of ten minutes after each 10 minutes turn key off count to five turn key back on without cranking the engine do the three times after the third time turn off key count then try to start it should work

Jul 04, 2012 | Cars & Trucks

1 Answer

About a year ago I took my '01 Miata into the dealer for a stalling problem. The car would lose power and die in traffic and the check engine light would come on. After about five minutes it could be...

the most likely problem is the cam sensor in you valve cover. we see this all the time here in Florida. once the sensor heats up it fails and starts working again when it cools off. try replacing it with on from the dealer and you should have no more problems.

Jul 07, 2009 | 2001 Mazda MX-5 Miata

2 Answers

2001 Sebring won't start

I had same problem when I had a plain copy of the key made.
There's a proximity chip in the factory key or something, but the plain copy would not work. Engine would crank, then immediately stop. I didn't need the extra key bad enough to spend $80+ at the dealership.

Apr 13, 2009 | 2001 Chrysler Sebring

3 Answers

Intermittent Starting Problem

My 2007 Commander never stalled while running, but every couple weeks would fail to start. Turn the key and nothing would happen. After a couple hours or overnight it would always start again with no errors recorded. First time they replaced the shift box (auto) thinking the system was not showing in park. Second time they did nothing. Third time they replaced the keys and fob module thinking it wasn't being recognized. Fourth time it finally wouldn't start at the dealer either and they replaced the starter. So far so good and I'm keeping my fingers crossed. Dave

Jul 02, 2008 | 2008 Jeep Commander

1 Answer

Oil change

After you turn the car off, press the Accelerator all the way to the floor and release it all the way back three time really fast. Then turn the car back on. If it's not three times, try five times. One of them works. I do this for my car too.

Marty -MI

Jun 27, 2008 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
2006 Suzuki Aerio Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides