Question about Cars & Trucks

Open Question

2005 kia rio. main fuse melted in can not lift out no matter how much pressure and prying now what

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 141 Answers

SOURCE: How do I remove my alternator in my 03 Kia Rio?

All motor mounts need to be removed and jack the engine up till it almost hits the cowl.

Posted on Jan 09, 2009

Ad
  • 197 Answers

SOURCE: How do you change the clutch and pressure plate?

Easily. Remove the gear box, the roller bearing is fitted to the box, so yoou dont have to worry. The clutch and plate is fixed to the engine held in with hex nuts, you'll need allan keys to remove them, remove the bolts and the clutch and pressure plate will fall away. Take the new one from the box, being carefull not to contaminate with grease or oil that is on your hands, fit the pressure plate into the clutch assembly and line up to the engine and loosly tighten up so the pressure plate will move with a little resistance. This is where the fun starts. Get your socket set handle and push it through the housing into the engine. Centralise the pressure plate as accurately as you can. Offer the gearbox slowly to the clutch and try to push it home. The pressureplate should have enought movement in it to move slightly to allow the gear box to fit. Once fitted, slowly and levelly remove the box, then tighten all of the clutch housing into place. Refit the box, tighten and go for a cup of coffee to congratulate yourself! The only other adjustments you have to make are to the clutch cable. Loosen the lock nut, loosen the adjuster bolt, tighten the adjuster bolt until the cable becomes taught, depress the clutch and you should feel the clutch release. Tighten the locknot and that's it. Hope all goes well, any problems let me know any problems let me know and I'll help. Regards, Dave.

Posted on Aug 11, 2009

  • 691 Answers

SOURCE: replacing the starter on my 2005 Kia Rio

1st disconnect your battery (Tools that I needed. 14mm socket for mounting bolts, 13 mm socket and a drop light. You need to jack up the front end pretty high both sides and put jack stands under each side. (extra precaution I put wood under the wheels because I don't like getting crushed. Slide under your car (bring a drop light) Look up and see your oil filter. Now look left and you will see the starter motor (oh yeah there is a pain in the as s bracket in the way) remove that bracket (14mm should be right) and then remove the bottom bolt of the starter (you may need a long socket extension here 8"?) The next set of bolts you have to get from up above that come from the other side. Get your light in there the one on the left side is easiest so get that last. The one on the right side will have a wiring harness running really close to it. Force your 14mm socket onto it with a 4 in extension. Back the bolt off till it spins a free but leave it in the hole. Remove the second one until you hear the unit fall. When putting the two bolts from the other side in, don't reef on them to get them super tight. Save your core so you can get some money back. Good repair manuel will cost 20 bucks, Haynes auto repair at your local auto parts store. good luck

Posted on Oct 21, 2009

Testimonial: "Fast Comeback. I think I will become a member here."

Ironfist109
  • 3018 Answers

SOURCE: I have examined my fuses

  • The main fuse protects the other fuses and relays from a bad surge. Like hooking up jumper cable backwards or something major like that where if that main fuse was not there you could do a lot of damage to things that would cost a lot and take a lot of time to repair.
  • To replace this one I think it is two screw on the big 80Amp fuse inside the box and pull the bad fuse out and set a new one in it's place (either way is fine) and put the screws back in. That's it really. Nothing special to it. On GM's they use a couple big bolts to hold in the Main Fuse on the side of the Under The Hood Fuse Panel.

  • Hope this helps and thank you for using FixYa.

Regards, Tony

Posted on Jul 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Kia Rio, is there an access door in back seat to the fuel pump


Hi lift up the base of the seat if thers not one there the tank must be dropped down. Regards Jim...

Jun 20, 2015 | 2005 Kia Rio

1 Answer

How to change gas filter 2005 Kia Rio


Its recommended to disable the fuel pump to release pressure in the line before removing the filter. Either pull the fuse or pump relay.

Jan 24, 2014 | 2005 Kia Rio

1 Answer

My kia rio 2005 overdrive not working properly, sometimes stays in 3rd gear running at 50 or 60 mph...help please


get car scanned-cud be a stuck shift solenoid caused by bad or low fluid--also older trans have worn parts like clutches or a # of other things-may just need an ajust on the line pressure or throttle cable

Apr 04, 2012 | 2005 Kia Rio

1 Answer

I have examined my fuses in my 2002 kia rio to find the main fuse basically melted. How can I replace this fuse properly? What is the purpose of this main fuse?(Aside from, "you need it to run our...


  • The main fuse protects the other fuses and relays from a bad surge. Like hooking up jumper cable backwards or something major like that where if that main fuse was not there you could do a lot of damage to things that would cost a lot and take a lot of time to repair.
  • To replace this one I think it is two screw on the big 80Amp fuse inside the box and pull the bad fuse out and set a new one in it's place (either way is fine) and put the screws back in. That's it really. Nothing special to it. On GM's they use a couple big bolts to hold in the Main Fuse on the side of the Under The Hood Fuse Panel.

  • Hope this helps and thank you for using FixYa.

Regards, Tony

Jul 19, 2011 | 2002 Kia Rio

1 Answer

My car quit running driving down the road, does a 2005 kia rio have a timing belt?


Yes it does have a timing belt but should be checked for fuel pressure and spark. How many miles are on this engine?

Nov 08, 2010 | 2005 Kia Rio

1 Answer

We jumpstarted our 2005 kia rio and the cd player hasnt turned on since


sounds like you blow the fuse,,check fuse box also some radios are coded to prevent it been stolen your main dealer can decode the radio and it is normally free when you prove to them you are the registered owner of the car.hope this helps ( rate me thanks )

Aug 30, 2010 | Kia Rio Cars & Trucks

1 Answer

Kia rio 2001 has no current to fuel pump engine cramks ok


Try replacing or swapping fuel pump relay its in the main fuse box close to the battery

Jan 10, 2009 | 2001 Kia Rio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...