Question about 2003 Toyota ECHO

Open Question

Obd2 reads p0001,and p0003 on my toyota echo

Engine shakes,and misses

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75197 Answers

SOURCE: reading coder on toyota echo

I am sorry but no, there are different codes some are P codes, some are B codes, and there are other ones, OBD 1 (84-96) systems could flash the check eng lite and give you codes, but they were just two numbers like 12. A typical OBD 2 code is like this P1546, this is a emission code. Kragen auto or any of the chain auto parts stores will read the codes for free.

Posted on Sep 09, 2008

emissionwiz
  • 75197 Answers

SOURCE: check engine is on and the car stutters

go to any kragen or autozone parts store, they will run the test for trouble code that turned light on for free, tell them u want an OBD 2 trouble code test, then post the code here.

Posted on Mar 20, 2009

  • 15 Answers

SOURCE: Plug replacement on a 2005 Toyota Echo 4 cyl engine

Hey alanacheson,
The spark plugs are underneath that cover on top of the engine (should say VVTi on the cover).
Just take that cover off, and then you will see the four ignition coils. Take off the four ignition coils (with igniters), and you will see the four relatively long holes underneath, and the spark plugs are at the bottom of those holes. You will need a good spark plug socket (preferably a thin wall socket) and a 6" or 12" extension. This is actually a very easy job, and can be completed in less than an hour.
Hope this helps.

Posted on Apr 09, 2009

  • 58 Answers

SOURCE: 1999 Toyota vitz

check the level in your gear box.

Posted on Aug 15, 2009

  • 750 Answers

SOURCE: engine shakes when in drive

the idle speed may be to low, you may have loose or worn engine mounts, or you may have a faulty iac sensor and the engine may not have reach operating temp

Posted on Oct 28, 2009

Testimonial: "bless ya"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot get obd2 scanner to read my 2005 toyota echo at the dlc


- Check Voltage on pin 16 (BAT) and chassis (or body) ground. Always 12 Volts.
- Connect the Multimeter and check continuity between pin 4 (CG) and chassis ground. Less than 1 Ohms.
- Connect the Multimeter between pin 5 (SG) and chassis ground and check the continuity. Less than 1 Ohms.

9152a69f-35fe-4a01-bc27-3a599d95ff3c.jpg

- Check the fuse named OBD2 in the lower finish panel, under the dash on passenger side.
7d30bd8c-2d47-4126-90b3-dad061cf175a.jpg

Thank you for visiting Fixya.

Dec 09, 2012 | 2005 Toyota ECHO

1 Answer

2001 toyota echo engine mount locations


The spark plugs are under the coil packs. remove the top plastic engine cover and you will see a coil for each cylinder, remove one coil at a time and with coil removed you will see spark plug in hole.

Oct 25, 2012 | 2001 Toyota Echo

1 Answer

Toyota prius 2010 code p0001. what is this?


What size motor,and transmission?

Sep 04, 2012 | 2010 Toyota Prius

2 Answers

Video how to to change the blower fan on toyota Echo 2002


This blower fan in the 2002 Toyota Echo is located under the dashboard on the passenger side of the vehicle. It is covered by a plastic panel that snaps into place and shields the motor from accidental damage. When the blower fan fails, air will not come out of the vehicle's vents despite the fan control speed setting. A replacement blower motor can be purchased from a certified Toyota dealerships or any auto parts store
.


read more: obd2 car diagnostic

Aug 05, 2012 | 2002 Toyota ECHO

2 Answers

My toyota echo 200 model check light comes on. I have disconnected one terminal of the battery and it gets reset but after a while there is no fixed interval of running hours the check light comes on...


the engine light on means your car has the obd2 code problem you need to check out the code and delete it, i know this tool is helpful for your car, or you can take your car to toyota dealer to read out the code.

Jul 10, 2011 | 2001 Toyota Echo

1 Answer

Replaced the O2 sensor unit and the ECM(programs installed) but I'm still getting CHECK ENGINE LIGHT(P0001). what is the possible problem and how can this be resolved?


P0001 Fuel Volume Regulator Control Circuit/Open The above code is about an oxygen sensor code for the heater circuit located in bank 1 sensor 1. (bank 1 is at exhaust manifold by the #1 cylinder head, bank 2 is on the 2nd cylinder head. On some engines, both exhaust manifolds could have one oxygen sensor each side and the 2nd cylinder head will have the sensor 2). On the oxygen sensor itself, it has 4 wires which are color coded. Two of wires are for the heater circuit that heats the oxygen sensor to make it reach optimum operation quickly. Those 2 oxygen sensor heater wires could be shorted between the sensor and the ecm (engine computer) or other engine components.
oxygen%20sensor%20heater%20copy.jpgThe common fix for this code is to check the integrity of the heater wires. Check the wires for insulation and routing which could be loose or touching a hot exhaust that can short the wires. If the engine has too many miles, it is possible that the heater circuit inside is worn and shorted which needs a replacement of the oxygen sensor. If you have a DVOM, you can also test the continuity of the heater wires from the oxygen sensor to your computer pins.
More detailed fixes will be provided as soon as you give the symptoms of the obd2 trouble code. ATS will provide the wiring diagram so you can trace the color coded wires. Use an obd2 code reader or scanner so you can access this obd2 trouble code. When you have this obd2 code list, use it as a reference and give the code to ATS. We will then send you all the possible fixes for the obd2 trouble code. ATS has lots of fixes for obd2 gm codes, obd2 ford codes, dodge obd2 codes and all obd2 import codes such as Toyota obd2 codes, Honda obd2 codes, Nissan obd2 codes, etc. All fixes for this obd2 codes are guaranteed or your money back.
Important TIPS about Oxygen sensor:
The oxygen sensor content of the exhaust gas indicates when the engine mixture is operating lean or rich. When the oxygen sensor detects that the engine is operating rich, the signal voltage is high, and any decreases in the signal voltage means the engine running is lean. The engine computer supplies a reference voltage like one volt or five volts, and then shows the change in the sensor return voltage as the sensor's resistance is changing. If you have connected everything properly, when you crank the engine, you should see the check engine light coming out.
Unheated oxygen sensors rely on the heat of the exhaust gases to reach the working temperature, therefore they might start to cool down while the engine is idling and revert back to a default air-fuel ratio setting. This type of sensor usually has a single wire connector, though others have two. Unlike the fuel pump relay, the 02 sensor heater circuits have a separate fuse for each sensor and grounds, which are controlled by the engine computer.
To read a voltage across the heater, one side must be connected to (+) and one side must be connected to (-), which is accomplished by the computer or a transistor. It can read 12V between each wire and a separate ground if it was connected to positive and the other was not yet connected to ground connection (for details, please contact ATS).after you replace oxygen sensor you have to drive for so many miles before it resets its sef

Dec 13, 2010 | 2001 Volkswagen Beetle

1 Answer

2003 Toyota Echo - when in drive and stopped, car shakes and sputters on take off. When driving at full speed, no shaking, but can tell the engine does not feel and sound right - check engine light is on.


The check engine light is telling you the computer is detecting a problem from one or several sensors. You will need to have someone use a scanner to pull the codes. Places like auto zone offer this service for free(they want to sell you parts). Once you find out the codes then you can try and determine what the problem is. Could be anything from a bad plug wire to a plugged fuel filter.

Nov 14, 2009 | 2003 Toyota ECHO

1 Answer

Engine shakes when in drive


the idle speed may be to low, you may have loose or worn engine mounts, or you may have a faulty iac sensor and the engine may not have reach operating temp

Oct 28, 2009 | 2002 Toyota ECHO

1 Answer

1999 Toyota vitz


check the level in your gear box.

Aug 15, 2009 | 2000 Toyota ECHO

Not finding what you are looking for?
2003 Toyota ECHO Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...