Question about 2005 Jeep Liberty Limited
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It probably will cost a few bucks to get the code reset, but you don't need to go to the dealership, most shops with a good scanner equipped for air bag code reading will be able to diagnose and reset the light. The most probable reason for the code is the battery being dead for a while, there is a capacitor in the airbag circuit to make sure the airbag can go off in a collision even if the battery disconnects itself in the process. There is a slim chance it might be something else but either way the shop should be able to tell you what the problem is, and get it fixed... But, just for fun, before doing all this, i'd disconnect the battery for 30 minutes to an hour and reconnect it back, some systems do effectively reset themselves this way.
Posted on Jan 13, 2009
put the back of car on jack stands and secure the front tires so it does not roll and then remove the bolts off the back of the caliper there is normally two one at top and one at bottom and spray it with some kind of oil for rust and make sure you have the right size socket before you try to loosen them and once caliper is off and the old pads removed take one of the old pads and squeeze the piston on the caliper back in by using a "C" clamp and also remove some of the brake fluid from the master cylinder before you do this put the new ones back on and check the brake fluid and make sure it is full and then pump the brakes to make sure you have a good pedal also put some "No Squeak" brake stop on the back of the pads so they don't squeak they will have that where you buy the pads from
Posted on Mar 01, 2009
brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.
Posted on Aug 15, 2009
SOURCE: My 2005 Jeep Liberty 3.7
If the radio stays on and goes off as soon as you open the door, this is normal operation. Yes, this one threw me for a loop the first time I saw it also.
As for the lights blinking and horn honking, I would have to do some research to see what normal operation is. Many chrysler products do not have this built into their power lock systems. It depends on the security features of your particular vehicle.
Posted on Dec 20, 2010
Tips for a great answer:
Jul 12, 2017 | Jeep Cars & Trucks
Jan 12, 2016 | 2005 Jeep Liberty
Feb 17, 2015 | 2005 Jeep Liberty
Dec 01, 2012 | 2004 Jeep Liberty
Jan 25, 2011 | 2004 Jeep Liberty
Jan 22, 2011 | 2005 Jeep Liberty
Apr 02, 2010 | 2005 Jeep Liberty
Jun 09, 2009 | 2005 Jeep Liberty
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: