Question about 2000 Chevrolet Blazer

Open Question

Where is fuel pressure regulator located on 2002 blazer extreme

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 99 Answers

SOURCE: 1999 chevy blazer fuel problem

probably not fuel filter . probably going to have to remove the upper intake and replace the fuel injector spider(fuel inj assebly) if it is droping fuel pressure it is leaking into the upper manifold

Posted on Nov 30, 2008

Ad
  • 124 Answers

SOURCE: 2002 chevy Blazer hard starting

i agree with the fuel pump problem this is quite common with these trucks. but the fuel injectors on this motor are not accesable without removing the plenun and they are not standard fuel rail injectors so you can not test as earlier instructed.

Posted on Dec 04, 2008

  • 1 Answer

SOURCE: locating the fuel pressure regulator

its located under the upper intake plenum on the side of the injector metering block

Posted on Feb 23, 2009

  • 507 Answers

SOURCE: Fuel Pressure Regulator

not sure on an s10 but it should be close to the same position as a full size truck. Should be in the engine compartment, drivers side on top of the motor on the fuel rail. Held in by a snap ring or a c ring. When you buy your part, ask the salesman and they should be able to tell you for sure.

Posted on Mar 08, 2009

  • 6982 Answers

SOURCE: fuel pressure regulator

Two places to look...if you have separate injectors for each cylinder then regulator should be at the front end of the fuel rail. If you have throttle body injection it is on the throttle body itself.

Posted on Jul 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is location of fuel volume regulator


Fuel pressure regulator ! An it's location is inside the fuel tank .
The fuel pump (FP) module contains the fuel pump, fuel pressure regulator and the fuel sender assembly. The fuel pressure regulator is attached to the fuel pump in the fuel pump module located in the fuel tank. It regulates fuel pressure supplied to the fuel injectors. The fuel pressure regulator is a diaphragm-operated relief valve. Fuel pressure is established by a spring preload applied to the diaphragm. Excess fuel is bypassed through the regulator and returned to the fuel tank.

Nov 18, 2015 | 2002 Ford Explorer

1 Answer

Where is the fuel pump pressure regulator located on a 2002 Chevrolet S-10 ZR2 blazer with a W engine code


you'll find it at the end of the fuel rail it looks like a little fuel filter but it has a vacuum line in the top

Oct 01, 2014 | 2002 Chevrolet S-10

1 Answer

Chevy Blazer Extreme 2002 still won't start


Those are NOTORIOUS for fuel pump problems. If your fuel pressure is just 1 or 2 pounds low it will not start.

Apr 21, 2014 | 2002 Chevrolet Blazer

3 Answers

2002 chevy 3.6 vortec runs rough misses until warm


check fuel filter and air filter if its clean check your fuel pressure regulator

Apr 17, 2014 | 2003 Chevrolet Blazer

1 Answer

Where is the fuel pressure regulator located on a 1996 Chevy Blazer with a 4.3 V6 engine?


The fuel pressure regulator is under the upper manifold assembly. disconect battery remove manifold release the fuel pressure, remove the fuel pressure regulator snap ring retainer the regulator assembly and the O-rings.

Jan 03, 2011 | 1996 Chevrolet Blazer

1 Answer

2002 4.3 eng blazer, its hard to start .n0 check eng. light ?


The problem is your Fuel Pressure Regulator. this is really common on newer cars to go out.here is the way you can check to see if that is the problem. Locat the fuel rail on the engine. find the little round valve looking thing on the fuel rail that looks like it has a vacume line hooked to it. This is the Fuel Pressure Regulator. All you have to check it is pull off the vacume line going to it and if there is any fuel that comes out of the top of the valve or out of the vacume line this is the problem. there should be no fuel comeing out of it or the vacume line. and this will not cause a check engine light to come on. The regulator could run from $50- 130 depending on. Hope this is the Answer you were looking for

Nov 14, 2010 | 2001 Chevrolet Blazer

1 Answer

Where is the fuel pressure regulator located


It is mounted under the upper intake manifold.
  1. Disconnect the negative battery cable.
  2. Relieve the fuel system pressure. Refer to the fuel system relief procedure in this section.
  3. Remove the upper intake manifold assembly.
  4. Remove the fuel pressure regulator vacuum tube.
  5. Disassemble the fuel pressure regulator snapring retainer.
  6. Remove the fuel pressure regulator assembly and the O-rings. Discard the O-rings, filter and back-up O-rings.

6efa36c.jpg

Oct 19, 2010 | 1996 Chevrolet Blazer

1 Answer

Where is fuel pressure regulatore located


For 2000 Chevrolet Truck Blazer 4WD 4.3L SFI 6cyl
If your engine is a 4.3L V-6 with CPI (central point injection) it is inside the upper intake manifold. The upper intake manifold is bolted on top of the normal intake manifold.

The throttle body is mounted on it and your fuel lines terminate into the center of this.


Removal & Installation
  1. Relieve the fuel system pressure.
  2. Remove the air cleaner outlet resonator.
  3. Disconnect the engine wiring harness from the retaining clips at the front of the engine.
  4. Disconnect the fuel pressure regulator vacuum line.
  5. Clean any dirt from the fuel pressure regulator and the surrounding area.
  6. Disconnect the fuel return pipe.
  7. Remove the fuel return pipe retainer.
  8. Remove the fuel pressure regulator retainer.
  9. Remove the fuel pressure regulator.
  10. Inspect the regulator filter screen for contamination. If contaminated, replace the fuel pressure regulator.
To install:


aaf5240.jpg
Fig. Fuel pressure regulator-4.2L engine
  1. Install the regulator filter.
  2. Install the new O-ring on the fuel pressure regulator.
  3. Lubricate the fuel pressure regulator O-ring with clean engine oil.
  4. Push the fuel pressure regulator into the regulator housing on the fuel rail.
  5. Install the fuel pressure regulator retainer. Tighten the regulator retainer screw to 71 inch lbs. (8 Nm).
  6. Install the fuel return pipe retainer. Tighten the return pipe retainer screw to 71 inch lbs. (8 Nm).
  7. Connect the fuel return pipe.
  8. Connect the fuel pressure regulator vacuum line.
  9. Connect the negative battery cable.
  10. Inspect for leaks:
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
  11. Install the engine wiring harness into the retaining clips at the front of the engine.
  12. Install the air intake resonator.
Hope help with this (remember rated this post).

Feb 26, 2010 | 2000 Chevrolet Blazer

1 Answer

Fuel pressure regulator


Two places to look...if you have separate injectors for each cylinder then regulator should be at the front end of the fuel rail. If you have throttle body injection it is on the throttle body itself.

Jul 30, 2009 | 1997 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...