Question about 2002 Ford Taurus

Open Question

2002 ford taurus 3.0 24v dohc where is pcv valve

Can not find pcv valve not in normal spot( on valve cover)

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Monster80
  • 460 Answers

SOURCE: What is the location of the PCV valve on a 2005

Its in the back of the intake.It points straight towards the windshield way.It has a black hose that comes off from it..If your standing in front of the car looking down at the motor at the middle of the motor look straight back and down just after the intake starts to round down you'll see it..

Posted on Mar 30, 2009

Ad
mitchbtu
  • 121 Answers

SOURCE: Where is pcv valve located on 2005 taurus

It is below the egr valve close to the intake manifold below the intake air sensor, there is a tube running to it from the engine to recirculate exhaust air with fresh air, there is a clamp holding it to the air intake that you need pliers to remove, then you need to turn counter-clockwise 90 degrees to remove, do the reverse to install. to make it easier to access remove the upper intake. The pcv valve is not visible, however, you can identify it by the 3" inch long rubber hose that connects to the steel line running into the bottom of the intake. I have the part and am going to replace it soon, although Ford really makes it difficult to remove it -
pcv valve is located just under the throttle body. remove air cleaner assembly from throttle body and you will see a u shaped hose running horizontally.

Posted on Jan 27, 2010

ZX2Fast
  • 547 Answers

SOURCE: LOCATION OF PCV VALVE ON 2002 FORD ESCORT ZX2

Looking from the front of the car, start at the thermostat housing (where the top radiator hose goes) and go down from there. Located right next to the exhaust mannifold you'll see the hose going to the PCV valve.

Posted on Mar 05, 2010

  • 22 Answers

SOURCE: i need a routing diagram for the serpentine belt

c6eb5b9.jpg

Here ya go.

Posted on Jun 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I replace the PCV valve in 2002 Ford Taurus 3.0 duralac overhead valve v6?


there is a hose on top of your valve cover that connects to your air intake box where your filter is. where that hose ends at the valve cover that is where your pcv valve is

Mar 07, 2015 | 2002 Ford Taurus

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

1 Answer

Where does the pcv valve go


there are two engine option for your vehicle

if it is the 3.0 OHV the pcv valve will be in the rear valve cover on the passenger side.

if it is the 3.0 DOHC the pcv valve will be under the throttle body on the drivers side.

Feb 27, 2012 | 2003 Ford Taurus

1 Answer

I need the serpentine belt routing for a 2002 taurus 3.0 12 valve engine. The one for the 2001 isn't right


101480262
Here is the routing diagram for your vehicle. This is for the 2002 Ford Taurus. DOHC 12v 3.0L engine.

Hope this helps...

Sep 13, 2011 | 2001 Ford Taurus

2 Answers

How do I tell if my 2002 Taurus SES is a SOHC or a DOHC?


It should say this on top of the engines valve cover.

Aug 05, 2010 | Ford Taurus Cars & Trucks

1 Answer

Dose my 2002 Ford Taurus have a PCV vavle? and dose it have a power steering filter?


yes all cars have a pcv valve it is on your valve cover usally on pass side. and i need heard of a filter for a power steering and if there is i would say it's in the pump.

May 20, 2010 | 2002 Ford Taurus

1 Answer

2003 Taurus 24V DOHC, have engine oil covering oil pan. I thought is was the oil pan gasket, mechanic did not seem to think so. Put dye in and trying to find the leak source. Is there a common leak problem...


Oil leak can be attributed to several factors.
1. Gasket failure.
2. Uncontrolled Crank case pressure Failure.

RECOMENDATION:
Tighten both the valve cover and oil pan bolts.
Replace the Positive Crankcase Ventilation Valve and vacuum line.,

INFO: PCV
This is a valve causes a negative vacuum on the engine while its running, As to say if it had a leak in a valve cover it should not be leaking while its running, only when the engine it turned off.

Hope this tip guides you in the correct direction to solve this problem.

R/
David

Feb 13, 2010 | 2003 Ford Taurus

1 Answer

I need to know the location of the PCV valve in a Taurus 2004?


the PCV valve normally sets in the valve cover gasket on the right side

Nov 27, 2008 | 2004 Ford Taurus

2 Answers

PCV valve location


if i know what you are asking, look at where you put your oil in. on the valve cover to the top right should be a plug with a tubeing runs to your air clear tube where the air mass sensor and carb is located. i think that is what you are looking for.

Sep 05, 2008 | 2002 Ford Taurus

Not finding what you are looking for?
2002 Ford Taurus Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...