Question about 2003 Hyundai Santa Fe

1 Answer

How to remove the blower fan switch on 2003 santa fe

My blower fan only works on and off...Needs to be replaced

I have removed the panel and disconnected all electric connections.

I have removed the screw that fixes the switch to the panel and disengaged the black switch. I can turn it but can't remove it....Is there any other hidden screw or do I only have to pull harder....

Thanks
Guy

Posted by on

  • guy_saumur Jan 20, 2009

    problem solved....



    Once small screw holding switch in place is removed at the back of the panel, disengage the switch by turning clockwise....then pull hard on the switch and it will disconnect from the knob.



    Work completed...only cost a switch $49.95 Cnd

  • guy_saumur Jan 20, 2009

    See comments posted on January 20th

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

To remove the knob, put it on the second speed setting and pull! Center piece and outer knob will pop right off. Found the answer elsewhere and it ought to be here too.

Posted on Sep 21, 2014

6 Suggested Answers

  • 15 Answers

SOURCE: control for fan blower not working on any speed.2005 santa fe

Don't.  What you have to do is take the ashtray out then remove the 2 screws.  Pry the whole assembly off and replace the switch in the back. The knob only moves the switch back and forth and nothing more.

Posted on Oct 18, 2008

  • 5 Answers

SOURCE: Blower Motor

It's in the engine compartment on the passengers' side on the firewall.

Posted on Nov 29, 2008

  • 566 Answers

SOURCE: front wheel alignment

thanks for your reply/update the reason for front tyres wearing as you describe would suggest the steering tracking is wrong and for some reason ?the tyre wear on inner isindication the track is toeing out too much ? this fault could be ? simple adjustment req'd however dependand on make of tyres has to be considered when tracking as to whether they toe in or out or straight ahead ? also front wheel drive ? there could be other factors b4 tracking is adjusted such as steering joints wear ? or damage ? also suspension ? as i mentioned best to visit a good tyre depot and let them investigate while you wait and give you a reportas to fault normally free in uk if it is simply tracking req's re adjust then they can do it and charge for the adjusting not expensive and they may also recommend switching wheels from rear to front providing tread are good ? hope this helps best wishes

Posted on Mar 31, 2009

  • 3 Answers

SOURCE: blower fan won't shut off its or climate control

My 2004 Mercury Grand Marquis had a similiar problem. The blower fan continuously ran at full blast and wouldn't shut off now matter what!
It was the part called the Blower Motor Resistor had gone out. I purchased it for $50.00 from the Dealer and replaced it myself. You can get a diagram from your dealer or online. It is kind of hard to get to but if the dealer had replaced it.....it would have cost $200!

Posted on Aug 01, 2009

michigan man
  • 3533 Answers

SOURCE: how to change blower motor in a 2003 hyundai santa fe

try these two websites www.alldatadiy.com and www.autozone.com and you should be able to get pictures and diagrams showing you how to repair your truck

Posted on Aug 02, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 Hyundai Santa fe the blower fan stays on


short in the switch- worn out /or a bad fan motor

Aug 18, 2012 | 2003 Hyundai Santa Fe

3 Answers

Internal fan only works on full blast


The switch is bad, replace the switch

Sep 15, 2011 | 2003 Hyundai Santa Fe

1 Answer

How to change blower motor in a 2003 hyundai santa fe


try these two websites www.alldatadiy.com and www.autozone.com and you should be able to get pictures and diagrams showing you how to repair your truck

Aug 02, 2009 | 2003 Hyundai Santa Fe

2 Answers

Blower fan won't shut off its or climate control fan keeps running 2003 hyundai santa fe


Probably a stuck fan control relay.
Find the relay and remove it - if this stops the fan. replace the relay with a new one.

Aug 01, 2009 | 2002 Hyundai Santa Fe

1 Answer

AC know not working on 05 Santa Fe


for your blower switch concern it is very common for those to go bad. if you remove the ashtray and then the 2 screws you can pull the bottom panel off and remove the blower switch.

Jul 27, 2009 | 2001 Hyundai Santa Fe

2 Answers

The blower knob on the a/c in my santa fe doesn't work. Mechanic thinks it's the wiring.


The centre part of the knob has two internal tabs holding it in. A tiny flat screwdriver will pry this part out...watch out...it can pop out and shoot into the backseat!

Jun 09, 2009 | 2001 Hyundai Santa Fe

1 Answer

Santa fe blower motor


1.disconect the neg. fron battery.
2.the blower unit is located under the dash and behind the glove box.
3.open the glove box disconnect the cord.push inwardson the sides to lower the door fully.
4.remove the dash panel to the right (has one screw)
5.remove the inner frame scrrews (four screws)
6.remove the blower/evaporator mounting bolts and remove blower motor.
7.tranfer the fan to new motor prior to installation.
8.installationis the reverse of removal.
f.y.i. use pliers to release and remove the clip holdin blower fan to th emotor

Dec 13, 2008 | 2003 Hyundai Santa Fe

1 Answer

Fuse panel location Santa Fe 2003


It sounds like the switch for the blower went out, but all the fuses are in 2 places. lower left panel on drivers side and in the engine compartment.  

Oct 17, 2008 | 2003 Hyundai Santa Fe

2 Answers

Control for fan blower not working on any speed.2005 santa fe


Don't.  What you have to do is take the ashtray out then remove the 2 screws.  Pry the whole assembly off and replace the switch in the back. The knob only moves the switch back and forth and nothing more.

Oct 15, 2008 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
2003 Hyundai Santa Fe Logo

1,297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...