Question about 2000 Ford Focus

Open Question

Luggage boot lid ford focus open - 2000 Ford Focus

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Destinova
  • 46 Answers

SOURCE: ford feista

Try your local junk yard.. that is NOT an item autozone would carry.. you might get lucky but doubtful
good luck

Posted on May 30, 2008

Ad
  • 3 Answers

SOURCE: how do i reprogram my02 ford focus remote locking key fob please.

get in your car close door hit the unlock button then put key in the ignition cycle the key from off to on (STOP BEFORE START POSITION) cycle key off to on 7 times after the 7th trime the doors should lock the unlock automatically that means u are in trainning mode hit the unlock button on key fob. the key fob should now work if it doesn't then try changing batt

Posted on Nov 27, 2008

  • 16 Answers

SOURCE: car doors will open boot will not open

Your boot lock switch has proberly came loose or has no power or earth to it. You will need to check these things.

Posted on Feb 16, 2009

  • 563 Answers

SOURCE: MY BOOT KEEPS COMING OPEN ON MY FORD FOCUS X REG

Seems like either your lock needs replacement or some stuff obstructing its locking mechanism.
Try spraying some lubricant or WD-40 on the lock, and see what comes out.

Posted on Nov 13, 2009

  • 55 Answers

SOURCE: 2001 ford ford focus boot lock keeps opening

if it is a push button release check the cable is not being stretched when you close the boot.usually held on by adjustable clips

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 town car trunk wont open with remote or button on door, only key?


Luggage Compartment Lid
The luggage compartment lid module receives a voltage signal from the driver door module (DDM) when either the button on the driver door trim panel, the keyless entry keypad, or the transmitter is pressed (twice on the transmitter). Voltage is then supplied to the luggage compartment lid latch, opening it. Using the luggage compartment lid key operates the latch mechanically, resulting in manual-only operation of the lid. There are two switches in the latch. One is monitored by the luggage compartment lid module to sense if the latch is closed. The other switch in the latch is monitored by both modules (LCM and luggage compartment lid module) and is used for disabling the anti-theft system, which is contained within the LCM. The luggage compartment lid module powers the lid motor to move the lid to the full-open position when it senses the latch has been opened. Optical sensors within the lid motor are monitored by the module to determine when to turn off power and which circuits should be powered or grounded to the lid motor. When one of the buttons is depressed with the lid open, the DDM sends a signal to the luggage compartment lid module which powers and grounds the correct circuits to the lid motor and lowers the lid until the latch closes. The module senses the latch closing through the lid latch switch that is monitored. At this time, the module powers the closing motor, slowly pulling the lid to a fully closed position. Two switches within the closing motor are monitored by the module to determine when the closing motor is fully down or up. The module has a vehicle speed output (VSO) (circuit 679) signal that is used to shut down the system if there is a VSO of approximately 5 kph (3 mph) or more. For diagnostics, the module uses the ISO-9141 circuit 70 that is included in the DLC (data link connector). Whenever battery power is lost to the luggage compartment lid module, luggage compartment lid motor or the luggage compartment lid closing motor; the system must be initialized.

NOTE: The luggage compartment lid motor is equipped with an optical sensor that the module uses to determine if the lid is closing on foreign materials based on lid speed. If the module detects this occurring, power and ground will be reversed to the lid motor and the lid will open.
  1. Verify the customer concern by operating the luggage compartment lid using the four different methods (driver door trim panel button, transmitter button, keyless entry keypad and key) to duplicate the concern.
  1. Visually inspect for obvious signs of mechanical or electrical damage.


Visual Inspection Chart Mechanical Electrical
  • Luggage compartment lid motor
  • Luggage compartment lid closing motor
  • Luggage compartment lid latch
  • Luggage compartment lid and hinges
  • Battery junction box (BJB) fuse(s):
    • 109 (40A)
    • 1 (30A)
  • Central junction box (CJB) fuse(s):
    • 30 (7.5A)
    • 14 (7.5A)
  • Circuitry

  1. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step. Verify the two grounds (G204, G401) are clean, tight and free from corrosion. Remove and clean to make sure.
  1. Monitoring the PIDS in the luggage compartment lid module can verify the DDM is sending the lid-open signal to the lid module. They can also be used to determine if the latch switches, the lid switches and the lid motor sensors are all providing the luggage compartment lid module with the correct and necessary information to operate the system. The VSO input can shut the system down if there is a signal indicating 5 kph (3 mph) or more.
  1. If the electrical lid operation is ok, but the key is ineffective, refer to Section 501-14 .
  1. If the cause is not visually evident, connect the diagnostic tool to the data link connector (DLC) located under the instrument panel and select the vehicle to be tested from the diagnostic tool menu. If the diagnostic tool does not communicate with the vehicle:
    • check that the program card is correctly installed.
    • check the connections to the vehicle.
    • check the ignition switch position.
    • If the diagnostic tool still does not communicate with the vehicle, refer to the diagnostic tool operating manual.
  1. Carry out the DATA LINK DIAGNOSTIC TEST. If the diagnostic tool responds with:
    • CKT 914, CKT 915 or CKT 70 = ALL ECUs NO RESP/NOT EQUIP, refer to Section 418-00 .
    • NO RESP/NOT EQUIP for luggage compartment lid module, Go To Pinpoint Test A .
    • SYSTEM PASSED, retrieve and record the continuous diagnostic trouble codes (DTCs), erase the continuous DTCs, and carry out the self-test diagnostics for the luggage compartment lid module.
  1. If the DTCs retrieved are related to the concern, go to the luggage compartment lid module Diagnostic Trouble Code (DTC) Index to continue diagnostics. For lighting control module (LCM) concerns, refer to Section 419-10 for a complete DTC index.
  1. If no DTCs related to the concern are retrieved, proceed to the Symptom Chart. Luggage Compartment Lid Module Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1342 ECU is Defective Luggage compartment lid module INSTALL a new luggage compartment lid module. B1359 Input Low When Key in RUN/START Position Luggage compartment lid module Go To Pinpoint Test A . B1551 Latch/Lid Release Circuit Failure Luggage compartment lid module Go To Pinpoint Test C . B2418 Sensor Power Short to Ground Luggage compartment lid module Go To Pinpoint Test B . B2419 Sensor 1 Invalid Luggage compartment lid module Go To Pinpoint Test B . B2420 Sensor 2 Invalid Luggage compartment lid module Go To Pinpoint Test B . B2421 Vehicle Speed Sensor Circuit Failure Luggage compartment lid module Go To Pinpoint Test C . B2522 Vbatt 1 Circuit Failure Luggage compartment lid module Go To Pinpoint Test A . B2552 Vbatt 2 Open Luggage compartment lid module Go To Pinpoint Test A . B2698 Vbatt 2 Circuit Failure Luggage compartment lid module Go To Pinpoint Test A . B2703 OPEN CLOSE SW Input Stuck Active Luggage compartment lid module Go To Pinpoint Test B . B2718 Lid Ajar Output - Short to Battery Luggage compartment lid module Go To Pinpoint Test B . B2721 Lid Ajar Output Circuit Failure Luggage compartment lid module Go To Pinpoint Test B . B2748 Drive Motor Open Circuit Luggage compartment lid module Go To Pinpoint Test B . B2755 Drive Motor Short to Battery Luggage compartment lid module Go To Pinpoint Test B . B2757 Drive Motor Output Short to Ground Luggage compartment lid module Go To Pinpoint Test B . B2825 Obstacle Detection Path of Decklid Luggage compartment lid module Go To Pinpoint Test B . B2876 Striker Drive Short to Battery Luggage compartment lid module Go To Pinpoint Test D . B2877 Striker Drive Output Short to Ground Luggage compartment lid module Go To Pinpoint Test D . B2905 Striker Motor Open Circuit Luggage compartment lid module Go To Pinpoint Test D . B2906 Striker Up SW Input Invalid Luggage compartment lid module Go To Pinpoint Test D . B2907 Striker Down SW Invalid Luggage compartment lid module Go To Pinpoint Test D . B2908 Latch SW Input Invalid Luggage compartment lid module Go To Pinpoint Test B . B2910 Striker Up SW/Striker Down SW Mismatch Luggage compartment lid module Go To Pinpoint Test D . B5131 Clutch Circuit Failure Luggage compartment lid module Go To Pinpoint Test B . C1123 Vehicle Speed Sensor Circuit - Fault Luggage compartment lid module Go To Pinpoint Test C . Do you know what diagnostic trouble code's are ? That would be the first place to start , checking for code's . An seeing how you probably don't have a ford IDS - scanner . your best bet mite be to take it to a qualified ford - lincoln dealer

Jun 07, 2018 | Cars & Trucks

1 Answer

The boot of my ford focus 2006 don't open, can someone tell me what could it be, please


They are fitted with an electronic boot release mechanism, that can play up and be damaged by an incorrectly aligned boot lid.

Fit a new mechanism.

To check the alignment of the boot lid.
fold the backseats down so someone can crawl through with a flashlight and watch where its striking while slowly being closed, adjust trunk lid, repeat as necessary.

Feb 26, 2018 | Ford Cars & Trucks

1 Answer

Btw 125i..roof won't go down..roof starts to open then hovers between open & closed..checked luggage compartment lid tray is fully down and boot is closed..any suggestions?


Check that the hydraulic overide screw (if it has one) has not come loose to release pressure. Make sure all windows are down. Make sure boot isn't locked. Test luggage switch hasn't failed by disconnecting at the plug and get your multi meter and check for a complete circuit at the switch itself when depressed. Failing all that manually lower the roof and then refit and try then. This has worked on a peugeot 207 should also work with others

Nov 04, 2017 | Cars & Trucks

1 Answer

I have a 2011 ford focus having trouble opening the boot lid the number plate light is not working and the third brake light what is on the boot lid is not working can anyone tell me the problem


there are a set of wires on the right arm of the trunk lid that get too close to it and end up getting cut. you will have to fold the rear seat down and climb in the trunk to get to the emergency open cable to open the trunk, then you should be able to splice the wires back together and zip tie them up out of the way, just make sure you leave enough slack in the wires so you can still open the trunk.

Jul 24, 2016 | Ford Focus Cars & Trucks

2 Answers

Battery dead. how can I get trunk open.


You can't unless it has a key hole. If you put jump leads on the battery or connect a battery charger it will open straight away.

May 01, 2016 | 2008 Ford Taurus SEL

1 Answer

Cannot open the luggage compartment of the maserati quattroporte battery is dead


Use the cars ignition key, insert into lock next to boot/trunk manual release. NB lean on boot/truck lid as you turn key otherwise you run risk of breaking the key. Boot will open.

Dec 07, 2012 | 2007 Maserati Quattroporte Executive GT...

1 Answer

Can you give instructions to replace reversing bulb in ford focus


the fixing scews for the lense/bulb holder are on the top of the lense just under the boot lid as you open it . once you have removed the screw/s the whole assembly should be loose and you can easily remove it to gain access to the bulbs

Aug 09, 2010 | 2003 Ford Focus

1 Answer

Had problem with boot lid popping open when driving itpopped open today and i closed it and locked car when i opened car again the boot lid will not open


Same thing happened on my Focus. I suspected dirt had been preventing the boot from fully locking. A generous application of WD40 on the locking mechanism located on the boot seems to have resolved the problem.

Feb 24, 2010 | 2005 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...