Question about Cars & Trucks

Open Question

Where is the inhibitor switch gearbox situated on Kia Carens FT03EEB

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnny5846
  • 379 Answers

SOURCE: inhibitor switch

eh , Automatic transaxel Range (TR) switch , can also be referred to as the Inhibitor Switch , personally i would call it the neutral safety switch , anyway you can find the "inhibitor" switch on top left side of transaxel , it goes over the shifter shaft coming out of the trans where the shifter cable bolts onto . Looks like a 1/4 of a circle . cheers mate

Posted on Jan 13, 2009

Ad
nsejoshua
  • 97 Answers

SOURCE: sorry have a kia sportage and the fuel inhibitor

Hi!... For your Reference in Locating some parts or repair Instructions for your Kia Sportage download the repair manual HERE...

Posted on Jun 18, 2009

Magaiver
  • 707 Answers

SOURCE: how to fit a wheel bearing to a kia carens front

It is only a four bolt sistem to change after the brake *** is removed. U may also have to remove the upper and lower control arms.

Posted on Aug 10, 2010

  • 4793 Answers

SOURCE: kia carens 2003. (UK) Don't know alternate name.

take out all the screws in the door handles etc,slide the chrome suround forwards on the interior doorpull and remove.then, very carefully prise off the inner door panel(use a Y tool for the clips,or a wide screwdiver..you will break some) with the window up,you will be able to see a wire hanging down from the outside handle,it is the clip that holds this on that is broken(very common)if the clip is okay then you will have to see what else is needed.but it will be obvious.

Posted on Aug 13, 2010

agent91
  • 2100 Answers

SOURCE: Hi,I have a Kia Carens

About the only thing you can do is get under there with a light and supported on jacks and blocked up, have someone put the tranny through the gears, without it running of course, visually check the linkage and make sure nothing is getting hung up. I slammed a car into reverse once, It went into second but the linkage was in reverse, I had to tow it and get it figured out, learned a lesson that day. Another thing that could have happened is the pressure plate has snapped in half on you, rare, but it happens, especially when new. It will be stuck in gear alright, and it won't shift, or clutch. Check it out, hope this helps.

Posted on Jan 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kia carens problems


look in the runner for a dropped coin!

Dec 08, 2013 | 2009 Kia Carens 2.0

1 Answer

The horn of my KIA CArens has stopped working. I suspect something at the push at the steeing wheel. Any help


check horn fuse
measure voltage at horn
one wire will be earthed to car body hopefully and the other wire will get plus 12 volts when the horn is pressed.
or one wire is always 12 volts and the other wire is connected to earth when horn button pressed.
check fire wall of car some kia have horn on firewall in engine compartment. or it is under the grill in front of car.

Sep 07, 2012 | 2005 Kia Carens

1 Answer

I have a kia carens 2001, making a knocking on right side when accelerating and turning left and a lil on the right and steering is jumping when accelerating and at 70km pls help


common fault on kia carens is the drive shafts ive had to replace both mine its a easy job to do but will set you back about 130 pound a side.

Jun 04, 2012 | 2005 Kia Carens

2 Answers

How to fit a wheel bearing to a kia carens front wheel.kia carens is not in the drop dowm menu


It is only a four bolt sistem to change after the brake *** is removed. U may also have to remove the upper and lower control arms.

Aug 10, 2010 | 2002 Kia Sedona

1 Answer

Kia carens 2001 malfunction indicator light flashing on and off where is sensor positioned for sorting this


that is a misfire situation it it may need regular maintenance but i have seen the butterflies in the intake come apart and there is a recall for it on sorentos

Apr 24, 2009 | 2002 Kia Sedona

1 Answer

Starting problem


SOURCE: Kia Technician Times
TITLE: A/T Inhibitor Switch
APPLIES TO: 95-00 Sephia
SERVICE TIP:
CONDITION
Some 1995 thru 2000 Sephia Automatic Transmission equipped vehicles may exhibit the following inhibitor switch concerns: - The vehicle may not start intermittently in park or neutral. - The vehicle TCU may intermittently lose the gear position signal from the inhibitor switch and go into failsafe mode (third gear). If the inhibitor switch signal returns while driving, the TCU will return to normal transmission control. The vehicle will then upshift or downshift abruptly depending on vehicle speed. - The TCU will set a pending OBDII code and then after two key cycles, the MIL light will come on and the O/D light will flash.
CAUSE
Corrosion/dirt on the inhibitor switch connector terminals or internal contacts.
CORRECTIVE ACTION Replace the inhibitor switch with P/N KFW35-21-444 and carefully adjust per procedures in the applicable service manual.
Note: The 1998-2000 Sephia Service Manual has an error on page 42-104 inhibitor switch inspection/adjustment. The connector terminal chart should show terminals 5 and 7 having continuity in neutral. The correct inhibitor switch terminal locations are shown below.

I Hope this Info Corrects Your Problem Please Don't Forget to RATE Me ! Thank you

Feb 09, 2009 | 1999 Kia Sportage

2 Answers

Inhibitor switch


eh , Automatic transaxel Range (TR) switch , can also be referred to as the Inhibitor Switch , personally i would call it the neutral safety switch , anyway you can find the "inhibitor" switch on top left side of transaxel , it goes over the shifter shaft coming out of the trans where the shifter cable bolts onto . Looks like a 1/4 of a circle . cheers mate

Jan 13, 2009 | 2003 Kia Spectra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...