Question about 2001 Dodge Ram 2500 Truck

1 Answer

I need to identify the sensors on a 2001 dodge dakota 4.7l auto trans.

I need to find out which sensor is on the back drivers side above the pan gasket?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,669 Answers

Go to the auto supply store near you and get a Haynes manual for the 2001 Dodge Dakota...it's in there!

Posted on Jan 01, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: cant find crank position sensor

Can not find crank sensor on 1995 Dodge Dakota how hard is it to replace

Posted on Nov 30, 2008

emissionwiz
  • 75051 Answers

SOURCE: transmission won't shift into 3rd

the trans has a serious failure, that is why the metal, it can be overhauled for less than a replacement

Posted on Mar 30, 2009

c17hydro
  • 2984 Answers

SOURCE: I need a pictue of where the iat sensor is on a 2001 dodge dakota

a1aac39.gif

Posted on Mar 31, 2009

tse22
  • 103 Answers

SOURCE: is front drivers side wheel

depends on what you mean by "hard" if your mechanically inclined no, if you aren't, yes. You will need to remove the tire, the brake assembly and then get a large (32 or 34mm probably) socket to take off the spindle nut, I think on the dakota you have to remove the ball joint with a ball joint separator, remove the bearing assembly from the half shaft. (standard procedure on most vehicles) Hope this helps!

Posted on May 12, 2009

  • 111 Answers

SOURCE: Location of oxygen sensor on 2004 dodge dakota

One of them is located on the driver's side of the motor and connects to the exaust manifold.

Posted on May 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

O2 sensor bad, when I have auto zone hook up and test they do show o2 sensor bad, but the codes are saying sensor 3 and 4 are bad. it doesn't say "bank 1 sensor 2". how do I know what...


You will have a total of 4 O2 sensors, two on the left (driver's side-Bank 1) and two on the right (passenger side - Bank 2). Sensor 1 is before cat. convertor and sensor 2 after cat. converter. Hope this helps.

Sep 09, 2011 | 2001 Dodge Dakota

2 Answers

What does codes p1757 an p1762 on 2001 grand cherokee mean


P1757 - Governor Pressure Above 3 PSI When Request Is 0 PSI

P1762 - Governor Pressure Sensor Offset Improper Voltage

Both codes are refered at the governor pressure sensor; I am 99% certain that is bad. Just replace it. Check the voltage on the Light Green/White wire at pin 29 in the white PCM connector with key ON, engine OFF (KOEO). It should be about 0.5-0.7 volts.

If higher than 0.8 volts, check the Transmission Temperature sensor reading on a scan tool. If the Transmission Temperature sensor reads normal, the sensor ground is OK. If the sensor ground is OK, then replace the Governor Pressure sensor.

Hope this helps.

Feb 03, 2011 | 2001 Jeep Cherokee

1 Answer

Where is the output speed sensor located on a 1998 dodge dakota?


The speed control sensor is located on the tailshaft of the transmission -- drivers side (3.9 V-6) Auto trans

Sep 10, 2010 | 1998 Dodge Dakota

1 Answer

Crankshaft position sensor


It should be in the side of the block above the lip of the oil pan. Go through the wheel well. Passenger side.

Jun 05, 2010 | 2001 Dodge Dakota

1 Answer

01 Dakota; 5.9 auto. Trans. won't drive in drive,


You need to check for codes to see if a sensor in the transmission is at fault, The first step is always checking for codes if you havn't yet.

May 10, 2010 | 2001 Dodge Dakota

1 Answer

How do I locate the o2 sensors on a 2001 Dakota w/ a 4.7 ltr Magnum & automatic trans?


O2 sensors are located right on the exhaust pipes. If it is an upstream sensor it is before the catalytic converter. There can be one on each side of the motor. If it is a downstream sensor it is located after the catalytic converter.

Feb 02, 2010 | 2001 Dodge Dakota

1 Answer

2001 Dakota back-up lights don't work


it could be number of things, start with the easiest first... check the bulbs. if theyre good then try the fuses if theyre good then maybe the wre came off the trans back up sensor or maybe the sensor is even loose, have someone watch the lights as you wiggle your shifter

Nov 08, 2009 | 2001 Dodge Dakota

1 Answer

I cant find where the trans fluid thermostat goes in my 2001 dodge ram 3500 with a 46re trans and a 5.9 engine


if your vehicle is a diesel truck then removed transmission pan. removed transmission filter as well. you will find wiring going to two solenoids side by side. follow harness to other sensor. single solenoid which is located on governor. there will be a square sensor on side, should be black in color. that is your temp sensor. make sure to replace the governor and sensor together. they can be bought seperately but not advisable to just replace temp sensor. should range in price of $200 for both.

Apr 22, 2009 | 2001 Dodge Ram 3500 Truck

1 Answer

Wont start


the camshaft position sensor goes inside the distributor. the crankshaft position sensor is located at the rear of the engine, drivers side oem part #56027865AB for automatic trans. part #56027871 for manual transmision

Dec 04, 2008 | 1996 Dodge Dakota

2 Answers

Cant find crank position sensor on 1991 dodge dakota with a 3.9 liter engine 2wd auto.


Can not find crank sensor on 1995 Dodge Dakota how hard is it to replace

Jul 24, 2008 | 1995 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...