Question about Cars & Trucks

Open Question

Just replaced ignition coil pack and spark plugs on 2000 Acura 3.2 TL and check engine light is blinking and it is running horrible what could be wrong?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

justuscc
  • 360 Answers

SOURCE: No Start, No Spark, for Grand Caravan 3.8L

we get remans bad out of the box......... good luck

Posted on Sep 26, 2008

unsivilaudio
  • 25 Answers

SOURCE: Check Engine light on Acura TL 3.2 1999

You can turn off the Check Engine light by either disconnecting the battery or by using a code reader to clear the codes. However, if the problem still exists it will come right back on. Instead you should get the code read, find out what the problem is, and fix it. Your local autozone or checker auto parts store will read them for free.

Posted on Dec 31, 2008

  • 1 Answer

SOURCE: How do you reset the check engine light on an Acura TL 1999

i dont know how else to do it other than with a diagnostic tester. i think that may be the only way.

Posted on Mar 30, 2009

  • 67 Answers

SOURCE: 1999 Toyota Corolla runs rough. Check engine light is on.

I need the code #

Posted on Apr 17, 2009

  • 60 Answers

SOURCE: where is plug in acura 2000 tl for check engine

The OBDII connector is located in the center console just behind the ashtray. There is a plastic cover that must be removed and you will find the connector behind the cover.

Posted on Jan 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Misfiring code po1399 cylinder 3 and 4


On most Honda's when you get a misfire happening across the whole engine like that there are a few likely issues. the ignition coil if it's a single coil style or the connector at the distributor. They also have some issues with EGR's and plugged ports which can mess with the fuel trim numbers. It's important to check the fuel pressure and if possible a timing offset spec from the scanner whenever you're dealing with misfires on any vehicles Honda or not and determine correct pressure and flow whenever possible.


Hope this helps.

Aug 02, 2012 | Acura Cars & Trucks

1 Answer

ACURA TL 2000 check engine light is flashing


Instead of the auto-zone trip , take it to the dealer !

Mar 07, 2017 | 2000 Acura TL

3 Answers

ACURA TL 2000 check engine light is flashing


See if your car has an ignition control module. They will go bad over time and cause random engine misfiring. Just went thru it with my 2002 Buick LeSabre. 120,000 miles on the engine. Replaced plugs, plug wires and check the coils. It was the ICM.

Mar 18, 2010 | 2000 Acura TL

3 Answers

Tcs light, check engine light flashing and constant shaking..


Use an OBDII scanner, some auto parts stores will do this for you free of charge.
Codes P0300 through P0306 indicate mis-fire and you may also get codes reflecting Cat damage from running that way.
I know of one TL from this series (2000 3.2 TL) which had a warranty REPLACEMENT OF TRANSMISSION!!! free of charge and this very problem was solved. I still do not know why they were related. Talk to Acura customer relations about this.

Jul 09, 2009 | 1999 Acura TL

3 Answers

Misfire in Cylinder 1,2,3,5,6 of my 2000 Acura Tl


you may have a faulty crankshaft position sensor this is what controls the firing of the plugs. you may also have corrosion on the plug for the coil pack causing multiple misfires

May 17, 2009 | 2000 Acura TL

1 Answer

When idling my 2003 Acura TL the engine seems to want to almost die, also when i got on the freeway it seem to pull hard and **** like it was having trouble shifting into 5th gear. It also seems to run...


You may need to change the coil pack(s) or modular. The modular is what the coil pack(s) mount to. I'm not familiar with that engine so you may have a 3 piece coil pack, or a 1 piece. (If it doesn't have a distributor). You may first try replacing the coil wire. There is a good chance that is loose, or bad. It could also be the coil itself. Try the coil wire and if it still acts up, then try the others. Also, when you changed the plugs, did you put new plug wires? When I do a tune up on my vehicles, I change the plugs, wires, distributor cap and rotor, (coil pack,modular), whichever is equipped, oil, oil filter, tranny fluid and filter with gasket, valve cover gaskets, oil pan gasket oil filter, and fuel filter. Try changing the fuel filter as well, as plugged or dirty fuel filters can cause stall outs. I hope this information helps. Thank you for choosing fixya.com for answers.

Apr 01, 2009 | 2000 Acura TL

1 Answer

Replacing spark plugs on a 2001 Acura TL 3.2


Hello,

My name is Chris. I have 20 years acura experience.

If you have some technical experience changing spark plugs before you can it on these.

procedure:

remove spark plug coil packs on top of valve covers. 8mm socket and ratchet.
twist coil packs and remove from cover/plug. use 6 inch 3/8 extention and 5/8 plug socket and ratchet...remove plugs from tube in valve cover. Use NGK plugs!!!!! or Nipondenso plugs only!!!! Nothing else.... trust me on this one.

However, I think your problem is more than just plugs. you need to explain what sound your are experiencing... please be detailed. when does it happen and how? does it have a check engine light?
does it run rough when you coast only?
Thanks.

Dec 15, 2008 | 2001 Acura 3.2TL

1 Answer

How to change spark plugs on 2005 acura tl


Hi,

you need a 6 inch extension, short 3/8 ratchet, 5/8 plug socket, 3/8 swivel "u" joint, (sold at sears) 8mm 1/4 drive socket deep well and 1/4 inch ratchet.

find the coil packs (6 total, three in each head.)
remove the two retaining nuts holding each coil pack using 1/4 8mm socket and ratchet.
twist the pack to break the sticking boot below.
pull up (be careful to not rip the boots however it may still happen but rare.)
remove coil packs, the rear is a little more difficult with the intake.
use 6" extension and u joint and ratchet to remove plugs and replace.
reverse order to assemble. Good luck, and hoped this helped.

Nov 05, 2008 | 2005 Acura TL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...