Question about 2005 Ford Freestar

Open Question

What is the problemn when a powertrain fault has been detected

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 wrench light is on


Powertrain Malfunction (Wrench) Warning Indicator (base instrument cluster)
The instrument cluster receives the powertrain status from the PCM over the high speed CAN. When a powertrain system concern is detected, the PCM sends the instrument cluster a command signal to illuminate the powertrain malfunction (wrench) warning indicator. If the 4WD control module detects a failure with the 4WD drive system, the 4WD control module sends a message to the instrument cluster over the CAN to illuminate the powertrain malfunction (wrench) warning indicator. On 4.6L engines, if the transmission control module (TCM) detects a failure with the transmission, the TCM sends a message to the instrument cluster over the CAN to illuminate the powertrain malfunction (wrench) warning indicator.
better have it checked !
Bett

Sep 10, 2016 | 2006 Mercury Mountaineer AWD

1 Answer

P1481 p1484 fault codes?


For mini cooper
P1481 - is
Type Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled Description Fan Secondary Low With High Fan On Conditions
Cause Key on or engine running, high speed cooling fan enabled, then the PCM detected the fan secondary circuit was low (with the high speed cooling fan on).
and

P1484 -
Type Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled Description Open Power Ground to VLCM Conditions
Cause Key on or engine running, then the PCM detected that the VLCM power ground circuit was open.

hope i can help you, or you can ask the 24 hrs live technical support http://www.spobd2.com/service, they will like to help you, good luck

Aug 04, 2013 | Mini Cooper Cars & Trucks

1 Answer

P0604


Hi there:

P0604 - GM
Type: Powertrain Computer and Auxiliary Outputs - ISO/SAE Controlled
Description: Control Module Random Access Memory Fault Conditions
Cause: Key on for at least 5 seconds, system voltage over 10v, then the PCM detected that the internal data test (RAM) failed • Refer to code repair chart for instructions on how to replace a PCM and how to reprogram the replacement

This code is a fairly simple one. It basically means that the PCM/ECM (powertrain/engine control module) has detected an internal integrity fault in the PCM.

Hope this helps.

Sep 24, 2012 | 2007 Chevrolet Blazer

1 Answer

ENGINE LIGHT CAME ON


Whenever the check engine light comes on the powertrain control module has detected a fault, you must now have the system control module tested for fault codes, a code or codes is set whenever this light is turned on.

Jun 07, 2012 | 2000 Plymouth Breeze

1 Answer

2009 ford explorer wrench appears and starts running rough,


The Wrench Symbol is the Powertrain malfunction indicator: When this symbol comes on it means that the powertrain control module (PCM for short) has detected a problem in the powertrain (engine, transmission AWD), in you case it seems to be the engine that has problem. The number of problems that turns this light on is not cut and dry, it can be any number of things that have malfunctioned. What must be done now is to the the system scanned for fault codes, a fault code or codes is stored for the problem when this light came on or in your case comes on. It is likely this problem is covered under the emission system warranty if you have less than 70,000 miles on the truck.

Feb 08, 2012 | Ford Cars & Trucks

3 Answers

THE WRENCH LIGHT CAME ON WHAT DOES THAT MEAN


Meintanance required, maybe a full tune up?

Mar 03, 2011 | 2006 Ford Explorer

1 Answer

My service engine soon light is on and I have been told the code is 1494. What does that mean?


P1494 is a Leak Detection Pump Switch or Mechanical Fault. During evaporative system diagnosis, Leak Detection Pumps have mistakenly been replaced. A thorough inspection for pinched, kinked, or disconnected supply vacuum lines (as currently listed in the Powertrain Diagnostic Procedures) is a critical step in diagnosing DTC P1494 (LDP SW OR MECHANICAL FAULT). This is a problem with evaporative emissions system and should not affect drivability. If this was helpful please leave positive rating.

Nov 30, 2010 | 1999 Dodge Avenger

1 Answer

Picture of wrench and message in safe override


Throttle Control/Transmission (Picture Of Wrench):
Illuminates when a powertrain fault
or an AWD fault (if equipped) has
been detected. Contact your dealer
as soon as possible.

Jun 04, 2010 | 2005 Ford Freestyle

1 Answer

My free style has a light on with a wrench what does that mean


from the manual:

Throttle Control/Transmission:
Illuminates when a powertrain fault
or an AWD fault (if equipped) has
been detected. Contact your
authorized dealer as soon as possible.

download free at ford.com

Jun 01, 2010 | 2006 Ford Freestyle

1 Answer

Lost power driving. stopped, restarted, has a hard time going over 40 mph.


You are in "limp-in mode" There is a serious fault detected by the PCM. DON'T get to nervous yet, a false sensor reading can flag as a serious fault in the PCM (Powertrain Control Module).

Oct 24, 2009 | 2001 Ford Escape

Not finding what you are looking for?
2005 Ford Freestar Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...