Question about Honda Odyssey
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
call American Honda, there was a recall on 2001 Odyssey transmission and therefore Honda has an extended warranty for transmission. i just had mine replaced at no cost.
Posted on Aug 28, 2008
SOURCE: 2007 honda odyssey warning light
That isn't the light for low tire pressure. Low tire pressure will have what looks like a tire- flat. It is your VSA someone probably hit the button and accidentally. look to the left of your steering wheel there is a button that says VSA push it and see if it turns it off. I notice that this post is pretty old, so you may already have gotten the answer from your dealer, but I'm posting in case someone has the same problem later on.
Posted on Oct 21, 2008
I would not recommend using Dexron III. Honda Odysseys are prone to transmission problems. A drain and fill with Genuine Honda Fluid is Recommended. The drain plug can be removed with a 3/8 ratchet at the bottom of the trans. The fill hole is at the top of the trans. You remove it with a socket on a long extension. The capacity is close to 3 quarts
Posted on Apr 07, 2009
SOURCE: p0740 code on 2000 Honda Odyssey
Code p0740 is a problem in lock up control solenoid assembly, Check whether scan tool indicates another code. Does the scan tool indicate another code? YES - Perform the Troubleshooting Flowchart for the indicated Code(s). Do not continue with this troubleshooting until the causes of any other DTCs have been corrected. Measure the line pressure. Is the line pressure within the service limit? Repair the hydraulic system as necessary. Replace the Lock-up Control Solenoid Assembly set lock-up control solenoid valve/shift control solenoid valve A assembly and the A/T clutch pressure control solenoid valve A/B assembly. Turn the ignition switch OFF, and reset the PCM memory by removing the BACK UP fuse in the passenger's under-dash fuse/relay box for more than 10 seconds . Using the scan tool, check to be sure that the engine coolant temperature is 176°F (80°C) or above . Drive the vehicle at 55 mph (88 km/h) for more than one minute . Recheck for code P0740. Does the OBD II scan tool indicate code P0740? YES - Remove the torque converter and inspect for a missing torque converter O-ring. If the O-ring is damaged or missing, replace the transmission and torque converter. NO - The system is OK at this time.
Posted on Jun 11, 2009
There are several things that will turn the check engine light and TCS light on .If you get the code I can tell you exactly what the problem is . On your year i see transmission problems as well as EGR problems. If you go to any large auto parts store they will check the code for free or a very small fee.
Posted on Oct 26, 2010
Tips for a great answer:
Sep 12, 2015 | 2003 Honda Odyssey
Mar 20, 2012 | 1999 Chrysler Sebring
Aug 06, 2009 | 2005 Honda Odyssey
Jul 10, 2009 | 1999 Honda Odyssey
Apr 11, 2009 | 2001 Honda Odyssey
Apr 10, 2009 | 2004 Honda Odyssey
Jul 15, 2008 | 2001 Honda Odyssey
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: