Question about 2004 Jeep Wrangler

1 Answer

How do i replace shifter knob on my 2004 wrangler 4.0

Want to replace shifter knob with one i bought from store

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

All you have to do is put in a gear that it is comfortable. push button in and pull straight up. IT IS HARD to GET OFF and be prepared to stop before you hit yourself. Do not twist or rock could cause damage.

Posted on Feb 12, 2013


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1810 Answers

SOURCE: how do i get the shifter knob off of 2005 wrangler x?

if you drive by the local dealer and buy the mechanic a caoofey he will likelly take the knob off for you for free

Posted on Nov 14, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


The 4WD shifter knob on the 2007 JK's is ridiculously hard to remove. Pull straight-up with all your might, then after that fails, get some towels, and a chunk of would with a long pry bar. Hopefully you won't crack your center console.

Mar 19, 2014 | 2007 Jeep Wrangler Unlimited Rubicon 2...

1 Answer

How do i replace gear shift light bulb in 2004 toyota sienna?

I just replaced the bulb on my 2004 Toyota Siena XLS. This is the bulb under the shifter plate in the center of the dash just above the center glove compartment. It was pretty easy once you have the process. Remove the trim on both sides of the radio in my it was the plastic wood trim. This will expose a 10mm screw on the right at the bottom of the part you just removed. You should use a panel remover tool or in my case the iPhone repair kit tool worked great. You need to turn on the ignition and move the shifter into numeral. Unscrew the shifter knob. Remove the plastic cover over the shifter with the seat heat and power adapters. This is one piece and it's held on by 4 clips. The bulb is just under the shifter panel and you turn it 1/4 of a turn to remove. The part number is 90981-11040-BULB and you will only find it at Toyota.

Nov 11, 2013 | Toyota Cars & Trucks

1 Answer

Manual gear shifter thread

They sell adapters that screw on to the original enabling you to change the shift knob.Or check with a speed shop.Also some parts stores will have a bunch of male and female thread sizer hanging in the same location as hardware. Sometimes it`s on a flat board in that section as well. If you look in the perfomance section you may also find an adapter kit!

Apr 23, 2013 | 2005 Jeep Wrangler

1 Answer

Jeep wrangler 2005 automatic floor gear shifter is loose won't engage stuck in park

try pushing the knob down onto the shifter a little bit then try and shift. Sometimes if that knob is raised even a little bit it will be locked in park. Can't be 100% sure without seein it but worth a shot. Hope that helps you.

Oct 02, 2012 | Jeep Wrangler Cars & Trucks

1 Answer

How do i get the shifter knob off of 2005 wrangler x?

if you drive by the local dealer and buy the mechanic a caoofey he will likelly take the knob off for you for free

Nov 14, 2011 | 2005 Jeep Wrangler

1 Answer

2004 navigator gear shifter replacement

It has a very small screw on the knob it self towards the bottom. Loosen and pull up undo wiring and unscrew center link rod - replace knob

Feb 06, 2010 | 2004 Lincoln Navigator

1 Answer

Trying to put a new gear shift knob on but cant the old one off

it's a screw on first it's hard to turn but after turning counter clockwise real hard you'll be able to loosen the shifter iknob

May 30, 2009 | 2001 Jeep Wrangler

3 Answers

Lights are out on shifter and heater control knobs in 05 sentra

I'm posting a video on youtube now, search "micah rodby". You can get a new light bulb from the auto part store for the shifter and radio shack for the heater lights. good luck.

Nov 16, 2008 | 2004 Nissan Sentra

4 Answers

Stuck in park

is the jeep on a steep hill if so try rocking the jeep back and fourth while somone is inside trying to shift.

May 26, 2008 | 2004 Jeep Wrangler

4 Answers

2004 wrangler sport 60000 miles automatic trans. 4.0

i would check under you jeep at the transmission. there will be a rod there coming down from your firewall it should be in a bracket and have a nut on the end of it.
alot of them time with the vibration the nut will come loose. so you won't be able to put it into park. i would check there...
you can take your hand try to put the lever/bracket and move the braket . you will need someone in the jeep to keep there foot on the brake while you do this... but i would check there if this does not help e-mail me and i will help you throught this

May 16, 2008 | 2004 Jeep Wrangler

Not finding what you are looking for?
2004 Jeep Wrangler Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides