Question about 2005 Ford Escape

Open Question

06 ford escape cylinder head torque - 2005 Ford Escape

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
warlock61
  • 659 Answers

SOURCE: Axle nut torque spec

184 ft/lb

Posted on May 11, 2009

Ad
  • 122 Answers

SOURCE: need cylinder head gasket torque specs.

looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!

Posted on Sep 18, 2009

  • 2841 Answers

SOURCE: FORD 351 W CYLINDER HEAD BOLT TORQUE

Torque is 85 ft/lbs of torque. Tighten the bolts starting in the center of the head and working your way out to the ends. Go very slowly and only tighten slightly each time you move from the center to the outside. You must pull the head down very slowly each time. Here is the sequence, a127595.png

Posted on Sep 30, 2009

Testimonial: "Just what I needed, thanks."

sirgabe51
  • 66 Answers

SOURCE: I have 4.9L6 need torque specs for cylinder head

for cylinder head the torque is : step 1 55 ft-lb, step 2 65 ft-lb, step 3 85 ft-lb. Rocker arm stud nut or bolt is 17 to 23 ft-lb. and valve cover bolt 72 to 108 in-lb.


e023442.jpg

Posted on Dec 05, 2009

  • 181 Answers

SOURCE: torque specs for cylinder head on a 200 ford focus

  1. CAUTION: Always install new cylinder head bolts. NOTE: Lubricate the cylinder head bolts with Super Premium 5W 30 SAE X0-5W 30-QSP or equivalent meeting Ford specification WSS-M2C153-G prior to installation. Install the cylinder head assembly and tighten the cylinder head bolts in the following sequence.
  1. Tighten all bolts in a single sequence to 50 Nm
  2. Back the bolts off 1/2 turn.
  3. Tighten the bolts in sequence shown to 50 Nm .
  4. Rotate all the bolts in a single sequence an additional 180 degrees in two steps of 90 degrees each.
9 3 1 5 7
8 6 2 4 10 sequence for head


Spec for rod 38Nm

Posted on May 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear spindle torque spec.06 ford escape


Use new original equipment nut. This is a must! Below is a link to a SKF torque spec's booklet for all makes and models.

http://www.skf.com/binary/81-66360/457377.pdf

Jan 24, 2017 | Ford Cars & Trucks

1 Answer

Cooling problem,code#P1299,on a 06 Ford Escape 2.3l


P1299 - Cylinder Head Over Temperature Protection Active Description: Indicates an engine overheat condition was detected by the cylinder head temperature (CHT) sensor. An FMEM strategy called fail-safe cooling was activated to cool the engine. Possible Causes:
  • Engine cooling system concerns
  • Low engine coolant level
  • Base engine concerns
Diagnostic Aids: Refer to Section 1, Powertrain Control Software , for more information on the fail-safe cooling strategy and cylinder head temperature sensor. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to Pinpoint Test DL .


Feb 19, 2015 | 2006 Ford Escape

1 Answer

Head bolt torque specs cylinder ford


a Ford Prizm?
run , run far from this car. LOL.
old post
but am doing all geo post today , for future searches.
http://www.fixkick.com/PRIZM.html

that is a toyota 1ZZ-FE engine.
so the specs are same.
alldata.com covers both.

id bet , you need more that just 1 torque, how about the
sequence and how to put the cam belt back correctly.

OMG
the first google hit finds it.
google really is your friend, huh?

http://www.testroete.com/car/Toyota/celica/repair%20information/repair%20manual/06%20-%20Engine%20Mechanical/17%20-%20Cylinder%20Head%20-%20Installation.pdf

Jan 11, 2014 | Geo Prizm Cars & Trucks

1 Answer

Need to know Torque setting's for 96 Ford fairmont 4.0i cylinder head


You can call the Ford dealer service department. They can answer that for you.

Jan 21, 2013 | Ford Taurus Cars & Trucks

1 Answer

Need spec for torque on cylindr head of 2000 ford focus


Click here to see how to torque the head bolts.

Dec 16, 2012 | 2000 Ford Focus

1 Answer

Cylider head torque specs ford windstar 1996 3,8 cylider V6


Position the cylinder head on the cylinder block. Tighten the cylinder head bolts in 2 steps following the proper torque sequence. The first step is 37 ft. lbs. (50 Nm) and the second step is 68 ft. lbs. (92 Nm).


98c7056.gif

Oct 21, 2010 | 1996 Ford Windstar

1 Answer

Engine torque specifications ford escape 2.0l 2002 ( head torque bolt ). Tank`s Rick


Bolts are torque to yield and new ones are recommended.
Stage 1 15ft lbs
Stage 2 30ft lbs
stage 3 additional 90 degrees

Jul 25, 2010 | 2001 Ford Escape

1 Answer

What is the right Torque Specification of the cylinder head bolt,main bearing and connecting rod bearing for a 1997 Ford F 150 4.2 liter? Thank you...


Cylinder heat bolt torque:
Torque sequence --------- front | 7 3 1 5 | | 8 4 2 6 | --------- Step 1: Torque all bolts in sequence to 14 Ft/Lbs Step 2: Torque all bolts in sequence to 29 Ft/Lbs Step 3: Torque all bolts in sequence to 36 Ft/Lbs Step 4: in the sequence, loosen the cylinder head bolts three turns. Step 5: Tighten short bolt to 15 - 32 Ft/Lbs Step 6: Tighten long bolt to 30 - 36 Ft/Lbs Step 7: Tighten all bolt to 175- 185 degree note: Do not loosen all of the cylinder head bolts at one time. Each cylinder head bolt must be loosened and the final tightening prior on the next bolt in the sequence.
Main bearing torque:
Torque sequence: Step 1: torque bolts to 91 Ft/Lbs with the exception of the rear main bearing cap Step 2: torque rear main bearing cap bolts to 88 Ft/Lbs Step 3: torque brace bolts to 40 Ft/Lbs
Connecting rod torque:
Torque sequence Step 1: Torque to 29 Ft/Lbs Step 2: Turn an additional 90 degrees

May 17, 2010 | 1997 Ford F150 Regular Cab

2 Answers

Torque setting cylinder head bolt 4 cylinder KIA sportage


I need the torque settings and pattern for a Kia Sportage 2.2

Nov 24, 2009 | 2001 Kia Sportage

Not finding what you are looking for?
2005 Ford Escape Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...