Question about 2010 Dodge Grand Caravan
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls
Posted on Sep 23, 2009
There should be a small button on top of of the seat,
where the headrest bar go's in. Press and hold the
button while you remove the headrest.
Hope this helps. Good luck.
Posted on Jan 24, 2010
There are tools to do this but you are better off having a pro take it off and re install it for you, granted he may charge the same price of almost 200 bucks to do so which is about the cost of a new windshield ( without any heating element in them for defrost) but it will save you grief, otherwise i believe they use a steel wire with two handles to slice the adhesive between the glass and body then they carefully push it out of the frame YOU MAY BREAK YOUR WINDSHIELD DOING THIS IF YOU HAVE NEVER DONE IT BEFORE.
Posted on Mar 31, 2010
Testimonial: "thank you for the advice ,it was well taken."
SOURCE: 2010 dodge caravan
On the bottom of the auto transmission there is a belly pan, this pan must be removed to drain the fluid out of the transmission and replace the internal fluid filter. So you will need a large drain pan to catch the fluid and a floor jack to raise the van and safety stands to support it while you remove the bolts that hold the pan on, there is no drain plug so this is a VERY messy job. Clean off the old gasket completely, use no sealer and use a high quality trans pan gasket, the dealer is best or you will have leakage problems, tighten the bolts to 12-14 pounds of torque with a torque wrench, this is very important.
Posted on Feb 10, 2012
Tips for a great answer:
Jun 27, 2017 | Dodge Cars & Trucks
Mar 23, 2015 | 2010 Dodge Grand Caravan
Sep 12, 2014 | 2010 Dodge Grand Caravan
Nov 22, 2013 | Dodge Grand Caravan Cars & Trucks
Feb 10, 2013 | 2010 Dodge Grand Caravan
Sep 19, 2012 | 2010 Dodge Grand Caravan
Aug 08, 2012 | 2010 Dodge Grand Caravan
Jan 24, 2010 | 2001 Dodge Stratus
Oct 04, 2016 | 2010 Dodge Grand Caravan
172 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: