Question about Cars & Trucks

1 Answer

My fisher plow control unit will not turn on

I hooked up my fisher plow and the lights are working and it looks like the control Box is not going on I switch it to the on position is not coming on

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I have the same problem, I do see the power light come on when I hit the key to start the truck but it goes out when I let off the key. If I park it in the garage with the furnace on it stars working and is fine until I don't won it for a day or two then its dead again. No idea why control is dead or sitting in garage with the heat on gest it working.

Posted on Jan 02, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Lights on a fisher xtreme plow wont work

Check your harness plug ends for broken pins. Also the isolation module could be defective

Posted on Feb 07, 2012

noranda21
  • 1547 Answers

SOURCE: I am hooking up plow lights for a 2001 dodge ram

on back of lights look at color wires the ones coming from high beams and the low beams theres your color wires there

Posted on Dec 11, 2010

oldmanewtoys
  • 414 Answers

SOURCE: my fisher plow wont move

Sounds like pump is not working, check all fuild lines. Unless the plow is all electric, then the ground

Posted on Feb 26, 2010

  • 67 Answers

SOURCE: with plow lights pluged in do not have low beam on

ca mention may be wrong un plug the 2 chk fuse and start overthen u no

Posted on Dec 11, 2009

  • 37 Answers

SOURCE: looking for a schematic for

http://www.fisherplows.com/pdf/22372_050098.pdf

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I chang fues still no power fisher minit plow 2005 gmc plow work fine last year put on now no power to control box


May want to begin tracing the wiring harness from the plow all the way to the control box.

Dec 23, 2016 | GMC Cars & Trucks

1 Answer

I have a minute mount plow, when I try to use it only goes to left and right side but doesn't go up, when I try to lift the plow goes to the right. What can I do


2002 Fisher Minute Mount Inst-Act Wont Angle [Archive] - PlowSite ...

www.plowsite.com > ... > Truck & Equipment Repair

Nov 17, 2011 - 90 posts - ‎9 authors
My plow went up it was jerking and did it in steps , but , it got there . Now , it onlyjerks when i try to angle it right or left or up . I filled the fluid ... Drop it and if it doesn'traise you can just use a jack and shorten the transport chain to hold it. .... I do havecontinuity on the plow side for all 3 wires going to the plug . Hooking Up A Fisher Minute Mount 2 In Under 1 ...
54 posts
Feb 1, 2011
Plow Wont Angle
32 posts
Oct 19, 2010
What's wrong with my plow?
21 posts
Jan 9, 2003
Looking For Minute Mount Tips
57 posts
Feb 13, 2002
More results from www.plowsite.com

Ultramount Intermittent Angle Problem - Snow Plow Forum - L


Dec 27, 2015 | Cars & Trucks

1 Answer

My fisher minuteman 2 plow will go up and left and right but will not go down


Most of those systems don't have a driven retraction on the piston. It is gravity feed back. There is a valve that is sticking or out of adjustment. http://library.fisherplows.com/?cat=38

Jan 24, 2015 | Cars & Trucks

2 Answers

I have a fisher minuteman plow it will go up, left and right but will not go down what is wrong with my plow


If you have a Minit Mount two it's probably the valve sticking. It's electronically controlled so if it clicks, then the solenoid is working and the shuttle in the valve is stuck. Can be disassembled and cleaned. New ones are best but pricey.

Jan 24, 2015 | Cars & Trucks

1 Answer

Fisher plow lock up when training right or left.


Have a 2004 hmm and plow went up and down but jerked left to right but did not turn , found it to be wire harness going thru fire wall , sheet metal wore thru wires shorting them out , pulled harness thru and shrink rapped and hooked back up been working fine.

Nov 14, 2014 | Cars & Trucks

1 Answer

I have a fisher minute mount an older model with fixed controls. plow goes up and down but does not go left or right, sometimes with the control set for left or right it starts to go up ? where to sta


check the wiring connections on the plow solenoids to be sure they are correct, the second step is check the controller box, using a continuity check via multimeter set for DC voltage. I have an old western plow that had similar symptoms, and was the controller box.

Oct 19, 2014 | Cars & Trucks

2 Answers

Not sure how to hook up plow motor to battery? Its an old fisher speedcast plow with cable controls thats electic over hydralic.It has pos and neg. cables and a solenoid on the pos. cable. I assume you...


The heavy + should be connected to the battery through the solenoid for the motor. There should be wires to control the solenoid (an electric switch, you know). The - goes to the truck's frame at a place of your choice. The ground must be solid, you know that, right?

I think if I were doing this install, I would hook the plow ground with the battery ground on the fame or where ever it is located.

The plow control should be mounted for your convenience inside the cab.

Lets review: Plow motor | ground to ground, hot to solenoid (motor side) | solenoid (battery side) to battery | solenoid control wires to cab.

Thanks for your question at FixYa.com

Jan 02, 2010 | 1999 Ford F350 Regular Cab

2 Answers

Lights on a fisher xtreme plow wont work


I'm guessing that you have already checked to make sure there is power going to the plow lights. If not use a test light and make sure. The most likely problem is the grounds from the plow lights themselves to the frame. Take the lights apart and check and/or replace the grounds, wires inside the case take a lot of vibration and that can cause them to fail.Don't forget to check the bulbs to be sure they're good too. Hope this helps.

Dec 17, 2009 | 2007 GMC Sierra 2500HD

1 Answer

Hi, I have a 2000 dodge ram and when i plug my fisher plow up only one light works on the plow and one on the truck .when the plow is un hooked from the truck all the truck lighs work,and when i hook up...


There is a ground that is deteriorated in the harness. trace the ground lead back from the connection to your truck. Once you find the break, that should take care of your problem.

It is also possible to be a power lead, so check them also, but more often than not it is a ground.l

Hope this helps.

Dec 14, 2009 | 2001 Dodge Ram 2500 Truck

2 Answers

I just bought a 1986 chevy 1/2 ton with a fisher plow. I hooked up the plow and it won't go up or down, or left or right. The controls work, if I move the pistons on the valve body it still does'nt work....


un bolt the motor from the base, the pickup is just tin, they rot off and fall into the base. you may have valves stuck too, but if nothings moving and pumps running, it should labor BADLY

Sep 04, 2009 | 1985 Chevrolet Chevy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...