Question about 1995 Buick LeSabre
Need visual of heater core on firewall,diagram
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: heater core replacement
Actually if your handy the heater core on this car is pretty easy.. passengers side under the dash... but here is a link to some sites that will probably help
from .... one of the wikki sites.. LOL cant remember which now
The heater core is located under the dash, in the center above the "hump". The container holding the core looks like a black plastic box. Remove the ash tray for easier access. You may have to also remove some other covers under the dash. First drain the radiator. Then you have to disconnect the hoses. There are two hoses connected to nipples of the heater core that are thru the center of the firewall. This has to be done from underneath the car while raised. I also had to unbolt a frame support to get to the hose clamps (I have big hands; you may be able to reach them without unbolting it). Remove the screws that hold on the cover to the heater core. You should be able to get the old one out now. Just go in reverse order to put it back together.
also this link is very handy they have a pretty complete collection for MANY vehicles
Posted on May 30, 2008
the fuse is in panel with other fuses,however it will say a\c instead of heater. You may want to use a test light to check for voltage at the blower motor plug. To see if current is going to the fuse. Check the other fuses too. since they are linked in parallel to the the acc auto climate .
Posted on Dec 06, 2008
The heater core is located under the dash, in the center. The container holding the core looks like a black plastic box. Remove the ash tray for easier access. You may have to also remove some other covers under the dash. You must first drain the radiator then you have to disconnect the hoses. There are two hoses connected to nipples of the heater core that go thru the center of the firewall. Remove the screws that hold on the cover to the heater core. Then you should be able to get the old one out. There might be a couple of other minor steps but I'm sure you can figure them out. For re-installation just go in reverse order to put it all back together.
Posted on May 25, 2009
Tips for a great answer:
Dec 13, 2010 | 1997 Buick LeSabre
Dec 09, 2010 | 2000 Buick LeSabre
Sep 08, 2010 | 1993 Buick LeSabre
Jun 19, 2010 | 2002 Buick LeSabre
Apr 11, 2010 | 1995 Buick LeSabre
Sep 21, 2009 | 1993 Buick LeSabre
Sep 05, 2009 | 2001 Buick LeSabre
May 25, 2009 | 1994 Buick LeSabre
May 30, 2008 | 1994 Buick LeSabre
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: