Question about 1999 Ford Ranger SuperCab

Open Question

1999 Ford Ranger stuck in 4 wheel drive low

1999 Ford Ranger - stuck in 4 wheel drive low. Can't disengage. Any thoughts?

Posted by on

  • christina18 Feb 08, 2009

    when you shift truck in drive it won't do anything. you have to shift it into 2 then when you get going you can shift it to drive

×

6 Suggested Answers

  • 1 Answer

SOURCE: 1999 ford ranger 4x4 no 4 wheel drive

solenoid on back of transfer case is defective or no power to it /12 volts

Posted on Dec 22, 2008

jrod1125420
  • 161 Answers

SOURCE: 4 wheel drive

there is a way to do that.....all you have to do is go get the manual locking hubs and switch it over...not that hard....did it to a early 90s f150....pretty easy.

Posted on Sep 30, 2008

mattman2112
  • 57 Answers

SOURCE: Ford explorer stuck in low 4wheel drive

put it back into 2 wheel drive, then reverse 10 or 15 feet, this should unlock the hubs.

Posted on Jan 10, 2009

  • 1129 Answers

SOURCE: 1987 Ford Ranger stuck in 4 wheel drive!!

Chances are the linkage for the transfer case is out of adjustment try loosening the adjuster bolt and put the 4WD shifter into the position 4WD high or low (depending upon which position it's lockup in) then lock down the adjuster bolt, try to shift out of 4wd sometimes you need to go forward and backward with the vehicle to get it out of 4wd, when you get it out of 4wd you may have to fine tune the adjustment to get it to engage and disengage smoothly it's a trial and error thing keep resetting adjuster until you get the desired effect.

Posted on Jul 02, 2009

  • 225 Answers

SOURCE: need vacuum diagram for 4-wheel drive

the 4x4 don't use vacuum. the front is auto lock when the transfer is engauged with the button. if the light don't which when pressed into 4hi or 4low. the motor on the transfer case maybe hung up. they have to be used at least 4 times a year not to go bad. the motor is on the back side of the transfer case. best of luck.

Posted on Aug 07, 2009

  • 1374 Answers

SOURCE: 2006 ford f150 4wd drive will not disengage

Transfer case and shift linkage need servicing. Sometimes customers have gotten away with just a simple lubrication.... others a rebuild.

Posted on Jun 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 will shift to 4 high but will not go to 4 low


Ford Ranger Questions - 4 wheel drive relay clicking under ...

www.cargurus.com > Questions > Ford > Ranger
CarGurusJun 5, 2013 - 4 wheel drive relay clicking under dash - i put my truch in 4x4 the other day and ... and watch it move (or not move) while selecting 4x4 high, low and so forth.... MY 1999 Ford Ranger 4x4 will not go in 4 wheel drive 5 answers.

Sep 14, 2015 | 1999 Ford Ranger SuperCab

3 Answers

Wont disengage out of 4 wheel drive 1998 ford ranger first time its stuck in 4 low we have backed up turned switch numerous times shut it off and restarted


Be sure to put the truck in neutral, while engine is running, while you disengage from 4 wheel drive (low) to 4 wheel drive (high) and then finally to 2 wheel drive. It is critical to shift transmission into neutral when switching out of 4WD Low, as indicated in your owner's manual. Hopefully, this will help to FixYa problem!

Oct 14, 2010 | 1998 Ford Ranger SuperCab

1 Answer

I have a 1996 ford ranger. my 4 wheel drive wont


If your sure it is acually going into gear than check the auto hubs, they go bad alot. also you can with help from a 2nd person jack the truck up all 4wheels put the truck in 4x4 and drive and see if both drive shafts spin if they do its the hubs if the front one doesnt, its the transfer case

Dec 14, 2009 | 1996 Ford F250 Crew Cab

1 Answer

1989 ford ranger 4wd warn hubs disengaged it was


ahub mens u turn L R ok u take appart to much rust or stak open chek clen grese

Dec 11, 2009 | 1989 Ford Ranger

1 Answer

1987 Ford Ranger stuck in 4 wheel drive!!


Chances are the linkage for the transfer case is out of adjustment try loosening the adjuster bolt and put the 4WD shifter into the position 4WD high or low (depending upon which position it's lockup in) then lock down the adjuster bolt, try to shift out of 4wd sometimes you need to go forward and backward with the vehicle to get it out of 4wd, when you get it out of 4wd you may have to fine tune the adjustment to get it to engage and disengage smoothly it's a trial and error thing keep resetting adjuster until you get the desired effect.

Jul 02, 2009 | Ford Ranger Cars & Trucks

1 Answer

2001 ford ranger stuck in low range


SOUNDS LIKE THE LOCK UP SWITCH TO THE TORQUE CONVERTER IS MALFUNTIONING
GIVING A FALSE SINGLE TO THE TRANS. GEAR RATIO TO SLIP IN AND OUT OF 4 WHEEL DRIVE

Mar 25, 2009 | 1994 Ford Ranger Supercab

1 Answer

4 wheel drive will not disengage


Once you turn off four wheel drive back truck up at least 20 feet. This should disengage.

Mar 22, 2009 | 1999 Ford Ranger SuperCab

1 Answer

1999 ford ranger 4x4 no 4 wheel drive


solenoid on back of transfer case is defective or no power to it /12 volts

Dec 17, 2008 | 1999 Ford Ranger SuperCab

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

Related Topics:

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...