Question about 1993 Oldsmobile Cutlass Ciera

1 Answer

Dose not exclerat

When driving push on gas pedel there is a hasetation

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 17 Answers

Could be a couple of things, first place I would start is the spark plug and wires you could have a bad plug which could be causing the hesitation. Next, I would have the manifold checked out by either taking it to an auto parts store and if you ask nicely they may hook the code reader up to it and depending on the code it could be a real easy fix. Worst case scenario, its the Transmission. Go the cheapest route first and have the plugs and wires checked.

Posted on Jan 01, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brake light switch is broken


Its on the brake pedel you need to remove a clip from the end of the pin that slides through the pedel and the brake switch then the pin then the connecter . Install in reverse order .
However before removeing anything you should look to see if there is an adjustment for the switch . You see the brake light olny comes on if you push on the pedel most have adjustments on them because its an on demand thing so the light could be on if your not pushing the pedel or it could not come if you are pushing the pedel or it could not come on at all pushing or not pushing to pedel .You need to figure witch condution you actully have .

Mar 15, 2015 | Cars & Trucks

1 Answer

My 1998 200sx stopped accelerating while getting on freeway.


Could be the cable that actavates the throttle plate on the intake..
The cable comes from the gas pedel and pulls on the throttle plane in the intake manifold.. opening the plate to let air flow through to the engine. On the other side from the cable is a plastic sensor with wires attached to it this is the Throttle position sensor.. if this is disconnected or broken the computer cannot receive the single that you are pushing on the gas pedel.. very rare for the throttle position sensor to break completly.. best posibility broken cable.. open hood find cable connected to throttle body, have someone in car push pedel see if it moves. Good luck.

May 11, 2014 | 1988 Nissan 200SX

1 Answer

Fuel filter pressure


sound like fuel filter plugged fuel pressure should be 41 - 47 psi.4.6 engine for 4.9 engine fuel pressure should be 41 - 50 psi.

Sep 22, 2013 | 1992 Cadillac DeVille

2 Answers

Just turns off on it's own, Wait 60 sec. restart press pedel it dies.


This engine is electronically controlled so the first thing that must be done here is to have the systems control computer tested for fault codes and then do the proper diagnostics based on those codes.

Jun 07, 2012 | 1995 Plymouth Voyager

1 Answer

When driving im hearing a wierd squeeking sound when i push on the gas fluid levels are normal


the gas pedel linkagwe may need to be lubed
could be the air pump unloader on the engine polution controls

Mar 25, 2011 | 1994 Ford Econoline

2 Answers

Brake light fails to go off, when truck is off


Eighter the brake light switch is sticking or its no good . The switch controls the rear brake lights thats all it dose. But its easy and eary inexpensive to replace. Look up under the dashboard at the top of the brake pedel you will see a switch that if you push on the pedel it pushes a plunger into the switch . Its like a light switch in your house its on or off . The switch can be checked with a meter that has an OMHS setting with out removeing it by unpluging the connector from the switch take two jump leads clip one to each side of the switch terminals then clip the probes from the meter to the leads from the meter it dosn't witch side then push the pedel it should read 0 with no pressure and read 100 % with pressure so its on or off as long as it is on one way and off the other way its good . If its no good there is a clip on one side of a pin that slides thruogh the pedel and the switch remove this clip slide the pin out the switch will pop off there will likely be a bushing that is in the assembly and mabey a couple of washers note how they come out when your removeing the switch Then reassemble in oppistte order There will also be some type of adjustment on the plunger a small nut on a threaded rod look to see where it contacts its stop and adjust acordly

Jan 12, 2011 | 1995 Nissan Pickup

1 Answer

Can a tps sensor be adjusted?


No itsa were part it moves everytime you move the gas pedel so sence 93 how many times has it moved but it dose make a vary big differance in how the vehicle runs and it not hard to replace usely

Dec 23, 2010 | 1993 Cadillac DeVille

1 Answer

I need to replace the throttle cable. The car will not accelerate because the connection is frayed.


THIS IS NOT HARD TO DO AND INEXPENSIVE TO YOU DON;T REALLY NEED TOOLS THE CABLE IS ABOUT 20 $LOOK AT WHERE IT HOCKS TO THE THROTTLE BODY TURN THROTLE TO OPEN PISITION SO THE CABLE HAS LOTS OF SLACK AND SLIDE IT OUT THE SIDE NEXT REMOVE GROMUET WHERE CABLE GOS THROUGH LOWER FIRE WALL A LITTLE WD 40 HELPS JUST FOLLOW THE CABLE THEN YOU NEED TO OPEN DRIVERS DOOR AND LOOK AT THE GAS PEDEL IT HOOKS IN A SIMULAIR WAY THERE IS LOTS OF SLACK REINSTALL IN OPPISITE ORDER YOU NEED TO FIX THIS PROBLEM BECAUSE YOUR GAS PEDEL CAN STICK IF IT DOSE PUT YOUR FOOT UNDER GAS PEDEL PULL BACK

Oct 10, 2010 | Mercury Cougar Cars & Trucks

1 Answer

When i push the accel. pedel to it takes a about


check the adjustment on your accel cable...

Apr 05, 2010 | 2006 Toyota Land Cruiser

1 Answer

Making loud banging sound when gas pedel pushed


This sounds like a broken motor or transmission mount.  Try to isolate the location of the banging noise to give you or a mechanic an idea of which mounts to check first.  Some motor and transmission mounts can be tricky, so you may have to remove them to see that they are worn or broken.

Dec 21, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
1993 Oldsmobile Cutlass Ciera Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...