Question about 2004 Dodge Neon

Open Question

Need correct tmc for 2004 dodge neon

My mechanic says they no longer aftermarket the TCM for my 2004 dodge neon. 2.0 automatic. I must find one my self if I want to repair the car. In looking for the part I often get confused and the part is often nonreturnable. Is the ECM and the TCM the same or are they different? Where is the TCM located? What does it look like? Also some parts say they will need programmed -some say plug and play? Who can program the part is this something a dealer must do?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 46 Answers

SOURCE: Programming keyless remote for Neon 2004

There is a way to program a remote if there is already a valid remote. Unfortunatly if you don't have a valid remote the only way to get one programmed is at the dealership with their scan tool.

I have pasted directions for programming a remote if there is already a valid transmiter.


CUSTOMER PROGRAMMING For a customer to be able to program RKE transmitters themselves, at least one RKE transmitter must be programmed already. This procedure is to add additional transmitters. If all transmitters are lost, the DRB III® scan tool must be used to program the new transmitters.

  1. Insert the key into the ignition switch, and turn the ignition switch to the RUN position without starting the vehicle (allow chimes to stop).
  2. Using the RKE transmitter programmed to the RKE module, press and continuously hold down the UNLOCK button for 4-10 seconds.
  3. Within the 4-10 second time range, continue to hold the UNLOCK button and press the PANIC button. Both buttons may then be released. Upon the PANIC button being depressed, the message for customer programming mode will be transmitted to the RKE module.
  4. A chime will be heard to verify that the customer programming mode has been entered (allow 3 seconds to hear chimes).
  5. Press and release any button on each transmitter that is to be programmed to the RKE module, including any transmitters which were previously programmed to the RKE module (with a maximum of four possible). After each transmitter is successfully programmed, a chime will be heard to verify that successful programming of the transmitter has occurred.
  6. After thirty seconds, or upon the ignition switch being turned OFF, the RKE module will exit programming mode.

Posted on Aug 30, 2008

  • 24 Answers

SOURCE: 2003 dodge neon timing belt

My 2003 Neon SXT owners manual says 102000 to 106000 miles

Posted on Dec 26, 2008

  • 3 Answers

SOURCE: Cam Shaft Sensor Problems

Had the same problem before on my 04 Neon SXT...camshaft sensor is on left side of engine block, take out the battery and to the left of it (face car) is the camshaft position sensor. To change it you'll have to move a few hoses but its plan to see there on the left side of the engine...pretty easy remove and replace. Fixed my problem of car not going above 2k RPM when i replaced the sensor.

Posted on Dec 29, 2008

  • 512 Answers

SOURCE: knock sensor location on a 2004 dodge neon

knock sensor is located under the intake manifold in front of the starter. what codes did you have?

Posted on Jan 07, 2009

adve1958
  • 246 Answers

SOURCE: We lost the key to our 2002 Dodge Neon. Purchased

the only way is to take it to the dealer unless you have a scanner

Posted on Sep 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont shift gears


Dodge Neon Questions - 04 neon will not go into high gear ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusNov 3, 2012 - 04 neon will not go into high gear - 04 neon won't go into high gear. changed transmission fluid. (it tried to change after fluid was changed) gas cap ... ... Car: 2003 Dodge Neon SXT, automatic transmission. As of today, I have ...

Dodge Neon Questions - 2005 Dodge neon does not shift ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusApr 6, 2014 - Your cars computer gathers info on speed in order to shift gears properly.... then you won't have a speedo and the ECM will not tell the TCM to shift gears in the trans. .... Car: 2003 Dodge Neon SXT, automatic transmission.

Neon wont shift out of first gear auto. - DodgeTalk : Dodge Car ...

www.dodgetalk.com > ... > Dodge Neon - General Talk
Jul 30, 2011 - I have a 2003 dodge neon se and it will run and drive. The transmissonwill not shift out of first gear. Where do I start? Compare to Toyota Tundra. Get Tundra on ... 2000 Stratus won't shift out of First Gear
Mar 14, 2007
Not shifting out of Second Gear???
Jan 15, 2007
46RE wont shift out of first at full throttle.
Nov 17, 2006
Transmission wont shift
Nov 3, 2005
More results from www.dodgetalk.com

Jan 06, 2016 | 2003 Dodge Neon

1 Answer

How do i boot new tmc on 2003 caravan


TMC what is that? Do you mean TCM?

Aug 24, 2014 | 2003 Dodge Caravan

1 Answer

2002 Dodge Neon automatic transmission sometimes doesn't shift out of first gear


You will first need the TCM (computer) scanned for fault codes. If none show up then then try changing the transmission fluid and filter inside the transmission, if that doesn't work it is time to have an expert diagnose the issue. The TCM scan will need a special scanner, not the one that parts stores use to scam the engine computer (PCM)

Jun 10, 2014 | 2002 Dodge Neon

2 Answers

Automatic Dodge neon SE 2002 will not start.. Ran error code got P1684. When I was driving it wouldn't get out of first gear, I put in park shut it off turned back on still wouldn't get out of first g


that code is set when you disconnect the battery. It can happen if you have bad connections. Sounds like you have a lot of things wrong.

Mar 12, 2013 | Cars & Trucks

1 Answer

I was driving my 2004 dodge sx 2.0 (automatic) when all of a sudden i lost the drive gear so i by instint droped it down in to third and still no response... So i pulled over to the side of the road and...


The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM. This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it. The dealer probably saw the code P0700 and went to the TCM and pulled out the code stored there telling them the Transmission Solenoid Assembly (TSA) is bad.

Jul 11, 2011 | 2004 Dodge Neon

1 Answer

The code on my dodge neon srt 04 is p 0700 and the car wil not shift in to 2nd what could in be?


P0700 is a code that lets the PCM know there are codes stored in the TCM. You'll need to scan the Transmission for the true codes. When there is a problem with the transmission it will default into second gear. So its starting in second gear and not shifting into third or first.

Two common problems that result in the above are input and output speed sensors. The exact transmission codes from the TCM will pinpoint the problem further.

Dec 28, 2010 | 2004 Dodge Neon

1 Answer

HOW TO REPLACE MOTOR MOUNTS FOR 2004 DODGE NEON


I found a great 4 piece set for my 2004 Neon included 3 motor mounts and 1 automatic transmission mount for $115. Look at yogiautoparts.com - link for my part was at http://dodge-car-parts.yogiautoparts.com/20032005_neon_20_engine_automatic_transmission_motor_mount_4x_set_68150.html

11_19_2012_5_03_04_pm.jpg

Sep 27, 2010 | 2004 Dodge Neon

1 Answer

2004 dodge neon sxt 2.0l do i need to do a


there is no such thing you need to time the engine correctly

Nov 21, 2009 | 2004 Dodge Neon

1 Answer

Transmission


You probably need to have linkages at transmission lubricated. There is one that controls throttle valve which tends to seize up on a regular basis. When it starts to seize, you will notice it staying in lower gear longer before it shifts up, and sometimes it will shift down hard when slowing down to stop.

Oct 13, 2008 | 2004 Dodge Neon

Not finding what you are looking for?
2004 Dodge Neon Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...