Question about 2000 Chevrolet Impala

Open Question

2000 chevy impala 3.4 will not turn over.

Swith is good,relays good,starter is good ,no codes from code reader,power to everything.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Chevy impala diagnostic code PO742

i have the same problem, what can i do to fix it?

Posted on Jan 18, 2009

  • 4 Answers

SOURCE: radio unlock coed for chevy impala

• A module which communicates on the class 2 serial data circuit which supplies VIN information to the radio is replaced and not properly setup with the correct VIN information for that vehicle. The only way to unlock the radio is by using a scan tool.

Posted on May 15, 2009

greg_margo
  • 1959 Answers

SOURCE: PO481 code Chevy IMPALA 2003

Looked it up in Chilton's, confirmed in http://www.obd-codes.com/trouble_codes/

P0481 Cooling Fan 2 Control Circuit Malfunction

Each fan will throw a different code. See 3 fans listed for your model. Here's a link for the wiring schematic: http://www.chiltonlibrary.com/content/images/WD/GM/014/WD_GM_014788.pdf


Best of luck.
Greg

Posted on May 23, 2009

  • 10 Answers

SOURCE: 2000 chevy impala a/c low pressure port

PASS SIDE BY THE DRYER NEAR FIRE WALL.

Posted on Jun 28, 2009

bsylvi321
  • 46 Answers

SOURCE: AC Compressor not engaging on 2000 Chevy Impala.

When your R-134a runs too low it will NOT engage the compressor. You need to refill your a/c system before the clutch will engage, I also suggest finding the leak.

Posted on Apr 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

04 Chevy silver 2500 HD won't crank. New starter battery checked out good


Check all your fuses and also the starter relay, are you getting power to everything else? Are you hearing the fuel pump spin up when you first turn the key to the on position? If you can borrow or buy a OBD2 /CAN scan tool and check to see if there is any codes for crank sensor, or cam sensor.

Sep 28, 2014 | Cars & Trucks

3 Answers

Chevy impala wont start


Pretty sure I know your issue... Its really common in gm cars.. It happened to my buick.. I found a site that has the fix I even did it myself.. when I took it to the mechanic they were trying to charge me 400+.. read over it Im sure it will help

Aug 24, 2014 | 2002 Chevrolet Impala

1 Answer

2003 infinity i35 won't crank. good battery


If the ignition switch is good and you are certain it works fine,did you realize there is a TSB for this condition when ever you replace a infiniti starter or even some Nissan you are supposed to replace the starter relay also,but it goes further than that you also need to rplace the Throttle control relay with the starter relay.8_7_2012_4_44_55_am.gif

Aug 07, 2012 | Cars & Trucks

1 Answer

Chevy Impala 2003. Replaced cooling radiator cooling fan. Fan now works (driver side). Hooked up code reader. Received code for cooling fan removed code because fan was replaced. Next day engine light is...


is the passenger side coming on? it is possible that it is setting the code for different speeds also. may want to check the cooling fan relays.

Aug 03, 2011 | 2003 Chevrolet Impala

2 Answers

2003 Chevy Impala 78,000 miles KEY WILL NOT TURN. - Car was running fine! - Turned off key. - Tried to restart and Key will Not Turn. It was jammed in the OFF position. - I removed ignition...


ur still in a security lock out with ignition[ key ] system u might have to have it towed to dealer for them to hook up vehicle[contact dealer and advise what is happening and also recheck new key] for reprograming or reset system..some vehicles if u try to start vehicle while in a security mode can get completely locked out of vehicle and if u replaced the whole ignition housing and not just the cylinder the housing is the reader the wiring that is around the housing cylinder tube is what reads the key and syncs with the vehicle if u put in a different one or the wiring is damaged vehicle wont start and will stay in security mode

Jul 02, 2011 | 2003 Chevrolet Impala

2 Answers

I have a 2000 Chevy impala and I am having serious issues with it starting. The battery is fine, we replaced the starter and put in a new starter relay, still not cranking. We are now leaning towards the...


Does the security light in the dash blink?
Thinking it's a pass code fault(ignition switch)
There is no chip in the key,the computer looks for the proper rotation of the switch,had the same thing happen,
Should be able to start it if you crank the engine for a few seconds,release the starter and DON"T turn the key off,wait 10 minutes,crank it again,should start.
If not do the procedure again(had to do it 3 times on mine)
This is the relearn procedure that also has to be run after the switch is replaced(with a new key also)

May 09, 2011 | 2000 Chevrolet Impala

1 Answer

Fault codes


P0449 - Evaporative Emission (EVAP) Vent Solenoid Control Circuit
P0481 - Cooling Fan Relay 2 Control Circuit
It is not uncommon for the canister vent solenoid to go out.More then likely this is the correction for this issue.The second problem could be addressed by verifying that the second fan is not coming on and whether or not the fan is receiving any power.Turning the a/c on normally forces the second fan to come on.If it does not a wiring diagram may be necessary to check different points for power.Would start at the relay itself to verify power is going to and through the relay. You can also swap an identical relay with the fan relay just to test if the relay itself is malfunctioning.If it works after that then you need a replacement relay for that circuit.If it still does not work you will need to find out where the power stops flowing in that circuit.

Jun 05, 2010 | 2000 Chevrolet Impala

1 Answer

How to reset ecu on 2000 chevy impala


Pull the negative cable off the battery for a few minutes or so. What is your problem? If its an engine code you will need to have them cleared with a code reader

Nov 28, 2009 | 2006 Chevrolet Impala

1 Answer

I can not find the neutral safety switch on a 2000 buick park ave


Sounds like passlock security failure.Park neatral swith located at top af transmission where shifter cable connects to trans,should be on drivers side.

Mar 03, 2009 | 2000 Buick Park Avenue

Not finding what you are looking for?
2000 Chevrolet Impala Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...