Question about 1999 Toyota Camry

Open Question

What does a harmonic balancer bolt torque at

2.2 engine

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 318 Answers

SOURCE: lost bolt for harmonic balancer what size is it?

I have seen this and you can be glad if the balancer didn't move and damage the crank or t-belt area. Get another bolt and torque it correctly.

Posted on Jun 07, 2009

Ad
  • 1149 Answers

SOURCE: 1994 toyota camry harmonic balancer bolt will not

Hi:
Those bolts can be extremely tight, and the hardest part is holding the engine from turning. You often need a impact gun, or breaker bar, and I have had good success holding the engine with a chain type wrench, and protected the outside of the damper pulley with a piece of old belt.

Posted on Jan 29, 2010

dnewcombe1
  • 1564 Answers

SOURCE: how do you remove/replace the harmonic balancer

One of my little tried and true methods is to take a 1/2 inch or 3/4 inch breaker bar, slide a piece of pipe over it and after choosing the correct size socket for the bolthead. Place the breaker bar and extension on the frame and have someone turn the engine over 2-3 times with the key and this will break the bolt loose.

Posted on Feb 28, 2010

  • 100 Answers

SOURCE: I am in need of the torque settings on a 92

if you call auto zone they will be able to give you the torque specs. and the pattern... or you can go to the library and look in the chilton or haynes manuals...

Posted on Mar 19, 2010

  • 836 Answers

SOURCE: To get the harmonic balancer off 1996 Tacoma 3.4L

You turn the bolt counterclock wise, The bolt is very tight, you may have to use a holding fixture to keep the crank from turning.

Posted on Jan 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

01 Cadillac overheating and having no power like it has a governor on it


The engine is swelling because of the over heating. Stop using it !!!!!!!!! Gotta fix cooling system lest you seize the engine.

Nov 11, 2015 | Cadillac Cars & Trucks

Tip

What you need to know about Hyundai


I am a mechanic ..most people ask questions about these foreign hyundai motors ..below is an example of engines that basically if you ask about a Hyundai Xg 350 ,xg300 ..well allow me to hammer 90% of your questions in case you want to grab another motor ..these motors listed will work on 90% of all hyundai products ...Look at the starter sizes ,,all the same for the selected models ..then look at the motor sizes ..This will help you in solving some problems most do not give the specific questioning
100% NEW REPLACEMENT STARTER
FOR
STARTER

12 VOLT / CW ROTATION / 8 TOOTH DRIVE

REPLACES:
MANDO M62957
VALEO TM000A14401
BOSCH REMAN SR4118X
BOSCH NEWMAN SR4118N
HYUNDAI 36100-37210

FITS ON:

HYUNDAI
2001 SANTA FE 2.7L ENGINE
2002 SANTA FE 2.7L ENGINE
2003 SANTA FE 2.7L ENGINE
2004 SANTA FE 2.7L ENGINE
2005 SANTA FE 2.7L ENGINE
2006 SANTA FE 2.7L ENGINE

2003 SANTA FE 3.5L ENGINE
2004 SANTA FE 3.5L ENGINE
2005 SANTA FE 3.5L ENGINE
2006 SANTA FE 3.5L ENGINE

2002 SONATA 2.7L ENGINE
2003 SONATA 2.7L ENGINE
2004 SONATA 2.7L ENGINE
2005 SONATA 2.7L ENGINE

1999 SONATA 2.5L ENGINE
2000 SONATA 2.5L ENGINE
2001 SONATA 2.5L ENGINE

2003-2008 TIBURON 2.7L ENGINE

2005-2008 TUCSON 2.7L ENGINE

2001 XG300 3.0L ENGINE

2002 XG350 3.5L ENGINE
2003 XG350 3.5L ENGINE
2004 XG350 3.5L ENGINE
2005 XG350 3.5L ENGINE

KIA
2004 AMANTI 3.5L ENGINE
2005 AMANTI 3.5L ENGINE
2006 AMANTI 3.5L ENGINE

2001 MAGENTIS 2.5L ENGINE

2002-2006 MAGENTIS 2.7L ENGINE

2001 OPTIMA 2.5L ENGINE

2002 OPTIMA 2.7L ENGINE
2003 OPTIMA 2.7L ENGINE
2004 OPTIMA 2.7L ENGINE
2005 OPTIMA 2.7L ENGINE
2006 OPTIMA 2.7L ENGINE

2002-2005 SEDONA 3.5L ENGINE

2005 SPORTAGE 2.7L ENGINE
2006 SPORTAGE 2.7L ENGINE
2007 SPORTAGE 2.7L ENGINE
2008 SPORTAGE 2.7L ENGINE

on Oct 24, 2013 | Hyundai Cars & Trucks

1 Answer

How to replace crankpully on 3300 olbs


The harmonic balancer on these engines is now press fit onto the crankshaft and requires the use of Tool J-38197 for removal. The torque specification to be used during installation has also been revised. The procedure to be used when replacing the crank sensor is as follows:

REMOVAL






  1. Disconnect serpentine belt from crankshaft pulley.


  2. Raise vehicle on hoist.


  3. Remove right front tire and wheel assembly.


  4. Remove right inner fender access cover.


  5. Using 28 mm socket, remove crankshaft harmonic balancer retaining bolt.


  6. Remove crankshaft harmonic balancer using Tool (J-38197).


  7. Remove foreign object deflector (DO NOT use pry bar).


  8. Disconnect sensor electrical connector.


  9. Remove sensor and pedestal from block face.


  10. Remove sensor from pedestal




INSTALLATION






  1. Loosely install crankshaft sensor on pedestal.


  2. Position sensor with pedestal attached on Tool J-37089.


  3. Position tool on crankshaft.


  4. Install bolts to hold pedestal to block face, torque to (18-26 lb. ft.).


  5. Torque pedestal pinch bolt to (26-44 lbs. in.).


  6. Remove Tool J-37089.


  7. Install foreign object deflector.


  8. Place Tool J-37089 on harmonic balancer and turn. If any vane of the harmonic balancer touches the tool, replace the balancer assembly.


  9. Install balancer on crankshaft.


  10. Apply thread sealer GM #(NNN) NNN-NNNNor equivalent to threads of crankshaft balancer bolt. Torque bolt to + 56 degrees (104 lb. ft. + 56 degrees).


  11. Install inner fender shield.


  12. Install tire and wheel assembly. Torque lug nuts to (104 lb. ft.).


  13. Lower vehicle.


  14. Install serpentine belt.
see this vedio

Jul 11, 2014 | 1993 Oldsmobile Cutlass Ciera

1 Answer

Torque specs


B: INSTALLATION
1) Install the crankshaft pulley.
2) Install the pulley bolt.
To lock the crankshaft, use ST.
ST 499977400 CRANKSHAFT PULLEY
WRENCH
(1) Clean the crankshaft pulley thread using an
air gun.
(2) Apply engine oil to the crankshaft pulley bolt
seat and thread.
(3) Tighten the bolts temporarily with tightening
torque of 44 N·m (4.5 kgf-m, 33 ft-lb).
(4) Tighten the crankshaft pulley bolts.
Tightening torque:
127 N·m (13 kgf-m, 94.0 ft-lb)

Apr 10, 2014 | 1997 Subaru Outback

1 Answer

How many foot pounds of torque should i tighten the bolt that holds on the harmonic balance on a 1996 subaru legacy outback


From FSM:

B: INSTALLATION
1) Install the crankshaft pulley.
2) Install the pulley bolt.
To lock the crankshaft, use ST.
ST 499977400 CRANKSHAFT PULLEY
WRENCH
(1) Clean the crankshaft pulley thread using an
air gun.
(2) Apply engine oil to the crankshaft pulley bolt
seat and thread.
(3) Tighten the bolts temporarily with tightening
torque of 44 N·m (4.5 kgf-m, 33 ft-lb).
(4) Tighten the crankshaft pulley bolts.
Tightening torque:
127 N·m (13 kgf-m, 94.0 ft-lb)

Apr 10, 2014 | 1998 Subaru Legacy

1 Answer

My 93 Mercury Topaz has had a loud rattling noise on the right side of the engine for over a year and has gotten louder with time. I man at a gas station told me he had the same noise with his Ford Tempo...


A mechanic would use a stethoscope to listen for the source of the noise.
If it is a loose balancer, you normally remove the motor mounts and support the engine from the bottom to gain access to the bolt.
It would be advisable to take the bolt out and use some locktite on the threads.

Aug 09, 2013 | 1993 Mercury Topaz

1 Answer

How to oil pan out


what engine type if you have the 3.4 engine you need a engine lift or engine support fixture you have to remove engine mount and engine mount bracket.also 3.8 engine you need engine lift to raise engine to remove engine mounting bolts.

Feb 09, 2013 | 2000 Oldsmobile Silhouette

3 Answers

Sugar in a gas Tank


no you have to drop your gas tank clean it out. if you didn't start then just clean gas lines. if you started it then you need a new engine. the sugar gets in the engine and turns to syrup. bad engine.

Jan 28, 2013 | Ford Cars & Trucks

2 Answers

How to reset engine lite in dash


Check engine light comes on and off, these are indication that there is some error code stored in your vehicles ECM. The engine module computer needs to be scanned. These will give the code and as per the error code the further problem can be detected and confirmed. The engine light indicator blinks or remains steady on dash when engine computer noticed any problem with any engine electrically operated components.


For more help, I suggest you to refer the help links provided below. These will let you know more about which areas to look, check, when there is engine light coming up on dash panel.

---------

Click the link below: -------


Check Engine Light Reset Procedure?

http://whoisbyme.blogspot.in/2012/06/check-engine-light-reset-procedure.html

----------

Check Engine Light ON?

http://whoisbyme.blogspot.in/2012/06/check-engine-light-on.html

------------

Intermittent Check Engine Light?

http://whoisbyme.blogspot.in/2012/06/intermittent-check-engine-light.html

------------

WHY Check Engine Light On car?

http://schematicsdiagram.blogspot.com/2011/06/check-engine-light-on-car.html

-------------------

Check Engine Light, VSC light and Traction Control Light ON?

http://whoisbyme.blogspot.com/2012/06/check-engine-lightvsc-light-and.html

--------------

Check engine light flashing?

http://technoanswers.blogspot.in/2012/02/check-engine-light-flashing.html

Service engine soon Light Turned OFF after Jump Start?

http://whatisbyme.blogspot.in/2012/06/service-engine-soon-light-turned-off.html

------------

After replacing throttle body the Check engine light starts blinking?

http://technoanswers.blogspot.com/2012/01/after-replacing-throttle-body-check.html

---------

2005 Chevy Impala: Service Vehicle Soon Warning Light?

http://whoisbyme.blogspot.in/2012/06/2005-chevy-impala-service-vehicle-soon.html

--------------

Malfunction Indicator Light ON

http://whoisbyme.blogspot.in/2012/06/malfunction-indicator-light-on.html

---------

Check power-train message with orange engine light came on?

http://howtobyme.blogspot.in/2012/02/check-power-train-message-with-orange.html

-----------

2007 Toyota Highlander Hybrid: Yellow Check Engine Light ON dash?

http://whatisbyme.blogspot.in/2012/05/2007-toyota-highlander-hybrid-yellow.html

-----------

1999 Toyota Tacoma: Check Engine Light Read Code P0171?

http://whatisbyme.blogspot.in/2012/05/1999-toyota-tacoma-check-engine-light.html


------------

Car Runs Fine But Check Engine light is ON?

http://whatisbyme.blogspot.in/2012/05/car-runs-fine-but-check-engine-light-is.html

----------

Check engine light with codes P2195 and P2197?

http://howtobyme.blogspot.in/2012/01/check-engine-light-with-codes-p2195-and.html

----------

How to Read Codes from Check Engine Light?

http://schematicsdiagram.blogspot.com/2011/12/how-to-read-codes-from-check-engine.html

----------

Vehicle smog test failed Due to NO MIL/check engine light?

http://schematicsdiagram.blogspot.com/2011/12/vehicle-smog-test-failed-due-to-no.html

----------

OBD Code is cleared but check engine light will not RESET?

http://schematicsdiagram.blogspot.in/2012/02/obd-code-is-cleared-but-check-engine.html

-------------

Car jerks while going uphill and Check engine light is ON?

http://schematicsdiagram.blogspot.com/2011/12/car-jerks-while-going-uphill-and-check.html

-----------------

Toyota Camry Check engine light flashes while driving?

http://schematicsdiagram.blogspot.in/2012/02/toyota-camry-check-engine-light-flashes.html


-------

These details will help.

Thanks.

Nov 28, 2012 | 1999 Acura CL

2 Answers

Had my Harmonic Balancer replace now it shuts off after 10 mins of it being on


the garage may have did something to the crank position sensor that is located behind the harmonic balance. there is a ring gear there to for the timing

Oct 30, 2012 | 2001 Pontiac Grand Prix

Not finding what you are looking for?
1999 Toyota Camry Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...