Question about Cars & Trucks

1 Answer

Once they ended nursing? just how many weight was lost by moms

March 6th I've been nursing my child for nearly 2 years, she'll be 2. Anyway, I've maybe not had the opportunity to trust me, and lose any weight, I've tried! I was told that because I was nursing, the pounds would only drop down. Anybody experience this? After you stopped just how much did you drop? Thanks!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Any weight wasn't lost by me while nursing my 4 kiddies. The only real previous wives tale that was true was me maybe not conceiving a child while breastfeeding. My partner had me in the hucklebuck every 3 days without any safety and we didnt get prego!!! It completely worked for me personally on my last 2 after i was done nursing, to lose excess weight AFTER I stopped nursing i used phen375 scam fraud diet tablet. Take a look at there's a great overview of the most truly effective 5-6 weight loss supplements that actually work. Best of luck!

Posted on Dec 31, 2012


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

SOURCE: car drops out of gear, stars with 6th lets you

Most probably you need to check the clutch

Posted on Aug 15, 2009

  • 5370 Answers

SOURCE: I just need the wiring

For turn signal wiring diagram and troubleshooting.Please click on the link below:--- --------------- This should help.Thanks.Helpmech.

Posted on May 01, 2011

  • 277 Answers

SOURCE: We have a 2005 T&C.

Its probrobly the headlight switch.

Posted on Jun 04, 2011

  • 2100 Answers

SOURCE: 2006 Saturn Ion - Key

They do say that just a few keys on the ring is too much weight for the ignition to support, the vibration will , over time, eat away at the inside of the cylinder and the key will fall out and wear out. You see a lot of people with 50 keys dangling out of their ignition, bad idea, as you have found out. It doesn't need to even hit 1 pound, 8 oz. is too much. Get an 8 oz. piece of steel and put it in your pocket and see how long you can go with it, not long. Hope this helps.

Posted on Jun 29, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 Pontiac Grand Prix GT, front end shakes at 35-40mph?

You have worn front end parts or the tires have a separated cord in them.

Feb 28, 2017 | 2000 Pontiac Grand Prix GT

1 Answer

Acura Legend Power Steering ($500+) to repair??!!

check the power stearing line.they usually leek before a rack will.there manny fitings on this system. it could also be a rubber washer on the fiting.

Mar 29, 2013 | 1995 Acura Legend

1 Answer

1997 front end shakes when braking

Brakes only require machining & such about every 3 years

I do take them apart once a year --to remove rust,inspect & lube,
as a perfectionist-- I say.

So you need a new brake guy

Answer is::: Very poor & sloppy-- who knows what has been
done to your brakes

Next was anything or I should say the complete front suspension,
drive axles,motor & transaxle mounts,struts,everything under there
every checked for worn parts.

I don't want to say you neglect things, but you need to be pro active
& really know what is done, when you ask for a service & pay for your
questionable services

Dec 01, 2012 | 1997 Mercury Sable

1 Answer

I have a 2007 ford fusion 4 cylinder. Hen I start it it idles low and when at a stop also it started stalling when at stop car runs perfect when driving. I'm stumped I have changed that spark plugs and...

You need to have a ford dealer run a power balance test and also see if the coil is getting a signal to fire, this would be wiring issue or a PCM problem.

Apr 05, 2017 | 2007 Ford Fusion I4 SEL Sedan

1 Answer

Any suggestions on fixing front end noise in my 2005 Chrysler 300:

When you replaced the struts they should have changed strut mounts also, that is where noise comes from, check your reciept.
Also, I have seen mounts, tie rod ends and ball joints loosen over a period of time, so have all your bolts and nuts rechecked for looseness.

Mar 03, 2017 | 2005 Chrysler 300

1 Answer

Any suggestions on fixing Front end clunking noise on 05 Chrysler 300?

I quit the Chrysler dealership aroung 2001, so I am not familiar with that model, however dodge/Chrysler did have issues with sway-bar links/ball joints/tie rods over the years. your clunking could be from any of these items or from the upper strut swivel plates. hard to tell without my assometer in it.

Mar 19, 2012 | Chrysler Cars & Trucks

2 Answers

How do i change the rear spark plugs on a 2000 crysler grand voyager

The best way we've found in our shop to do this is from below with the car up on the hoist.You'll have to let it cool down,the exhaust manifold is right close by and could burn your arm.

Sep 04, 2011 | 2000 Chrysler Grand Voyager

2 Answers

Oil leaking from rear of engine


Jul 04, 2011 | Chevrolet Corvette Cars & Trucks

1 Answer

Rear door on 06 jetta wont open

At a guess the outside handle has become detached from the linkage inside the door and you've got the child lock on as well.

Well to get the child lock off, you need a long fairly broad plastic strip, I've used the long side cut out of a plastic milk carton in the past.

Wind the window in the offending door down, then insert the plastic strip in the door gap underneath the handle, once in try the internal door handle, if it fails try again working your way down the door by widths of the plastic strip, trying the internal door handle as you go, with luck you'll have release the child lock by the 3-4th try.

Once open, its taking the inside door card off and re-attaching the linkage for the outside handle.

May 01, 2011 | Volkswagen Jetta Cars & Trucks

1 Answer

I have a 2004 Chevy Cavalier. A couple of months ago, just after starting the car one day, the 'check engine' and 'trac off' lights both came on. I immediately shut off the car, waited approximately 5...

Well it's temping to put in biggfer fuses as the problem gets worse but the size of the fuses are to keep you from burning things up so you've from your probem with a 30 amp smoke test. The raditor fan wire is melted somewhere in the wire harnes to the wire for the trck lock or even key on circirts. the likly place to look is inside the stering collum. It takes the skills of removing the steering whel and the lcok plate and even then thats does'nt have to be where the problem is. You need to look under the dash after you remove the covers and use you nose to smeel for the burnt wiring and open up any thing the smells like it's been hot and anything the appers melted together. once a harness is found melted you need to seragete all the wires in the loom but don't cut the wires justy seaparte them. once you think you've got then all pulled apart so no bear wires touch each other or any meal parts put in the correct size fuses and see if you can connect the battery with out a spark. if you can you may then start checking to see what works and what does'nt.. This all sounds like too much work or too hard to do then you'll need to pay someone theat knows alot about car wiring problems to do it for you. I'll been doing this kind of work for the last 20 years and a'm alawys finding new things that are fried and burnt up. We all charge by the hour to do this work so the most experieced mechanic that works on cars like yours will probly find and fix the problem the fastest. therefore they may charge more per hour but their likly to get it right quicker and it'll stay fixed after they fix it.. This is the most likly kind of work to go sour after it's fixed cause they might miss a circuit that you use and they did'nt try. and as soon as it burns again it's back to the drawing board and if big fuses are use the fire can take the whole car.

Apr 26, 2011 | 2004 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides